Timing belt connecting plates / XL, L, H, T#, S#M / aluminium

Click on this image to zoom in.

Promotional pricing ends 30/11/2024
Volume Discount

View the FAQ (8)

MISUMI

Order quantities extended (D-JIT)
Stock

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog

Back to the Category Timing Belt

Technical Drawing - Timing Belts

Timing Belt Clamp Plate/Nut Fitting Type/Single:Related Image

Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Timing Belts

Material: EN AC-51400-T5 Equiv.
Surface Treatment: Clear Anodize

Further specifications can be found under the tab More information.

Composition of a Product Code - Timing Belts

Part Number

Type	Belt Type	Belt Nominal Width
TBCR	- XL	025

General Information - Timing Belts

Timing Belt Selection Details

- Material: chloroprene rubber (neoprene), polyurethane (PU)

- Tension cord: glass fibre, aramid fibre, steel

- Width (mm): 1 to 101.6

- Width (in.): 0.19 to 4

- Profile (metric): T5, T10, AT5, AT10, S2M, S3M, S5M, S8M, S14M, MTS8M, EV5GT, EV8YU, 2GT, 3GT, MA3, MA5, MA8, P2M, P3M, P5M, P8M, UP5M, UP8M

- Profile (in.): MXL, XL, L, H

Description/Basics

Timing belts for mechanical engineering are intended for force and power transmission. Depending on the interlocking of the profile, they can alternatively be used for the material flow (transportation) or for positioning.
Timing belts are more maintenance-friendly, efficient and durable compared to roller chains.

Maintenance-friendly: timing belts do not require lubrication, are easy to replace and are very durable, as they do not sag. These properties significantly reduce maintenance costs.

Efficient: drive belts are largely made of natural rubber or polyurethane. As a result, timing belts withstand high speeds. A further advantage of these materials is the weight reduction compared to conventional metal drives. Timing belts are also known for low-noise running and contribute to the general smooth running of an application.

Durability: due to the inserted tension cord made of glass fibre or aramid fibre (Kevlar), timing belts can withstand high tensile stresses and do not tend to sag. An additional layer of nylon fabric on the interlocked side reduces wear due to abrasion and increases the service life.

Timing belts can be used in many ways. The belt profile that suits your application depends on the task of the timing belt. MISUMI offers a suitable belt profile for almost every type of application.

Drive: timing belts are used even at high torque. Drive belts with a rounded trapezoidal profile (e.g., S8M) are often used to drive mechanical components. These are particularly well suited for slip-free transmission of high forces, which can occur in drives of various applications or machines.

Positioning: a semi-circular profile (e.g., GT) is often used for positioning via timing belts. Round profile timing belts are often used in 3D printers and precise scanners. The round shape also offers the advantage that there is little play (reverse play) when the direction changes.

Material flow: timing belts can also be used to transport loads in conveyor systems. A straight trapezoidal profile is often used for this purpose (e.g., AT ). This profile provides a large profile area for load intake and transmission. The MISUMI range also includes conveyor timing belts with nylon fabric on the bearing surface.

An overview of the profile forms by application type can be found in the PDF Overview.

The amount of transmission power depends on many factors. The exact maximum load must be considered and calculated individually according to the application. The calculation for timing belts can be found in the selection of Timing Belts as PDF.
In order not to fall below the minimum number of teeth, the minimum size of the timing pulleys should be considered individually.
In general, a timing belt should be provided with the appropriate pretension to maximize the service life of the timing belt. If the pretension is too low, a jump (slip) can cause wear of the timing belt.

Application Examples - Timing Belts

Application example: synchronous belt - with screw-on terminal and drive belt - synchronous belt for positioning

Application example: workpiece carrier
(1) Stopper bolt with rubber, (2) belt conveyor, (3) workpiece carrier

Application example: synchronous belt drive - synchronous pulley with crimp disc - idler pulley with crimp disc - synchronous tensioner

Application example: of toothed belt drives
(1) Toothed belt, (2) driven Timing pulleys with crimp disc, (3) idler pulley with crimp disc, (4) driving Timing pulleys with crimp disc

Application example: Timing belt
(1) Linear guide, (2) mounting plate, (3) Timing belt, (4) Screw-on terminal

Application example - linear ball bushing and linear shaft synchronous belt - synchronous belt with flange bearings

Application example: Timing belt
(1) Bolt-on terminal, (2) Timing belt, (3) Linear shaft, (4) Linear bushings

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
TBCR-H075
TBCR-H100
TBCR-H150
TBCR-H200
TBCR-L050
TBCR-L075
TBCR-L100
TBCR-L150
TBCR-S3M060
TBCR-S3M100
TBCR-S3M150
TBCR-S5M100
TBCR-S5M150
TBCR-S5M250
TBCR-S8M150
TBCR-S8M250
TBCR-S8M300
TBCR-S8M400
TBCR-T10150
TBCR-T10200
TBCR-T10250
TBCR-T10300
TBCR-T5100
TBCR-T5150
TBCR-T5200
TBCR-T5250
TBCR-XL025
TBCR-XL031
TBCR-XL037
TBCR-XL050

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	Belt Type	Belt Width (mm) (mm)	Belt Width (Inch) (Inch)
18.48 €	1	Available	5 Days	10	H	19.1	0.75
18.73 €	1	Available	5 Days	10	H	25.4	1
19.61 €	1	Available	5 Days	10	H	38.1	1.5
21.01 €	1	Available	5 Days	10	H	50.8	2
12.65 €	1	Available	5 Days	10	L	12.7	0.5
13.16 €	1	Available	5 Days	10	L	19.1	0.75
13.53 € 9.47 €	1	Available	Same day Stock	10	L	25.4	1
14.05 €	1	Available	5 Days	10	L	38.1	1.5
8.61 €	1	Available	Same day Stock	10	S3M	6	-
8.61 €	1	Available	Same day Stock	10	S3M	10	-
8.61 €	1	Available	Same day Stock	10	S3M	15	-
11.12 €	1	Available	Same day Stock	10	S5M	10	-
11.26 €	1	Available	Same day Stock	10	S5M	15	-
12.52 €	1	Available	Same day Stock	10	S5M	25	-
12.65 €	1	Available	Same day Stock	10	S8M	15	-
12.91 €	1	Available	Same day Stock	10	S8M	25	-
13.53 €	1	Available	Same day Stock	10	S8M	30	-
13.66 €	1	Available	5 Days	10	S8M	40	-
14.30 €	1	Available	Same day Stock	10	T10	15	-
14.68 €	1	Available	Same day Stock	10	T10	20	-
15.06 €	1	Available	Same day Stock	10	T10	25	-
15.55 €	1	Available	5 Days	10	T10	30	-
11.12 €	1	Available	Same day Stock	10	T5	10	-
11.26 €	1	Available	Same day Stock	10	T5	15	-
12.40 €	1	Available	Same day Stock	10	T5	20	-
12.78 €	1	Available	Same day Stock	10	T5	25	-
9.62 €	1	Available	Same day Stock	10	XL	6.4	0.25
9.62 €	1	Available	5 Days	10	XL	7.9	0.31
9.62 €	1	Available	5 Days	10	XL	9.5	0.37
9.74 €	1	Available	5 Days	10	XL	12.7	0.5

Back to the Category Timing Belt

Technical Drawing - Timing Belts

Open the technical drawing in the new window

Specification Tables - Timing Belts

Part Number			W	A	B	T	h	L	P	d	Number of Mounting Holes	Unit Price
Type	Belt Type	Belt Nominal Width
TBCR	XL	025	6.4	36	24	6	1.25	25	12	4.5	4
		031	7.9		25				14
		037	9.5		26				16
		050	12.7		30				20
	L	050	12.7	66	32	8	1.9	50	20	5.5	4
		075	19.1		38				26
		100	25.4		46				33
		150	38.1		58				46
	H	075	19.1	89	38	10	2.3	70	26	5.5	6
		100	25.4		46				33
		150	38.1		58				45
		200	50.8		70				58
	S3M	060	6	21	20	4	1.14	15	11	3.4	4
		100	10		25				15
		150	15		30				20
	S5M	100	10	35	26	6	1.81	25	16	4.5	4
		150	15		32				21
		250	25		42				31
	S8M	150	15	56	34	8	2.85	40	22	5.5	4
		250	25		44				32
		300	30		50				37
		400	40		60				47
	T5	100	10	35	26	6	1.2	25	16	4.5	4
		150	15		32				21
		200	20		38				26
		250	25		43				31
	T10	150	15	70	34	8	2.5	50	22	5.5	6
		200	20		40				27
		250	25		44				32
		300	30		50				37

Metal fitting of S□M type can be used with a P□M type belt.

Products homepage

Basic information

Belt shape	Belt Clamp Plates

Configure

30Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Stock

- Show only stock items
Clear

Basic Attributes

Belt Type
- XL
- L
- H
- T5
- T10
- S3M
- S5M
- S8M
Clear
Belt Width (mm)(mm)
6

6.4

7.9

9.5

10

12.7

15

19.1

20

25

25.4

30

38.1

40

50.8
Clear
Belt Width (Inch)(Inch)
0.25

0.31

0.37

0.5

0.75

1

1.5

2
Clear
Type
- TBCR
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

Same day

5 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently Asked Questions (FAQ)

Question:
Where does the idler pulleys have to be placed on the timing belt?: Answer:
As a rule, the idler pulleys are positioned on the slack side, since the tension of the timing belt is here lowest during operation. Ideally, the timing belt is tensioned from the inside, because this prevents the timing belt from bending alternately. This is particularly recommended for timing belts with a steel tension cord. The idler pulley should always be larger than the smallest timing pulley of the belt drive system.
Question:
For what purpose can a timing belt with a round profile be used for?: Answer:
Round profile timing belts can be used in many applications. These are well suited for transmitting torque. In addition, the reverse play is very low due to the round profile shape with changing direction of rotation. The timing belts are also well suited for highly precise positioning. Timing belts with a round tooth profile can therefore often be found in 3D printers.
Question:
Can multiple belts be used for the transfer?: Answer:
A transmission can take place via one or more timing belts. If an equal distribution of the forces across the individual belts is not possible, it must be ensured that one belt alone can withstand the maximum load. In order to enable uniform distribution of forces, a precise adjustment is necessary. For this purpose, a toothed belt disc with clamping sleeve can be used, because it can be adjusted continuously and ensure uniform distribution.
Question:
Can a timing belt used for transmission?: Answer:
With timing belts, a gear ratio or reduction in a drive is possible. The gear ratio is established based on the number of teeth on the pulleys. It should be ensured that the minimum number of teeth of the timing pulley disc is not undercut.
Question:
What is the possible tensile stress for timing belts?: Answer:
The maximum allowable tension for MISUMI timing belts depends on the belt type, speed of rotation and belt pulley diameter. For more information, click on this link.
Question:
What is the minimum size of timing pulleys?: Answer:
The minimum size or the minimum number of teeth of a timing pulley depends on the belt type used and the height of the applied speed or rotation. You can find more detailed information about the minimum number of teeth of timing pulley discs in the selection of Timing Pulleys available as a PDF.
Question:
Does a timing belt stretch a lot?: Answer:
As opposed to a roller chain, the expansion is small. The length extension of timing belts is very stable. Therefore, it is not absolutely necessary to re-tension the timing belt during operation, as is necessary for chain drives. This makes the timing belt very easy to maintain compared to the chain. However, it should be ensured that the timing belt is free of oil, as the natural rubber could swell.
Question:
What is the purpose of a timing belt?: Answer:
The primary task of a timing belt is the synchronous and slip-free transmission of force or power. Depending on the task, various profile shapes are available for timing belts. These can be roughly divided into drive, conveying and positioning. In the following overview, you can view the various areas of use: Overview as PDF