Bevel Gears / Pressure Angle 20Deg. / Straight / Spiral Type

Click on this image to zoom in.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Bevel Gears/Pressure Angle 20Deg./Straight/Spiral Type:Related Image

Type					Material	Surface Treatment	Accessory
Straight Type			Spiral Type
Straight Bore	Straight Bore + Tap	Keyway + Tap	Straight Bore + Tap	Keyway + Tap
KGEASH	KGEAST	KGEASK	KGEAPT	KGEAPK	EN 1.1191 Equiv.	-	Set Screw (EN 1.7220 Equiv., Black Oxide)
KGEASHB	KGEASTB	KGEASKB	KGEAPTB	KGEAPKB		Black Oxide
KGEASHG	KGEASTG	KGEASKG	KGEAPTG	KGEAPKG		Electroless Nickel Plating
KGHS	KGTS	KGKS	-	-	EN 1.4301 Equiv.	-	Set Screw (EN 1.4301 Equiv.)

Set Screw is not included in Un-tapped Type products.

Specifications

Part Number	-	Nominal (Number of Teeth, Mating Gear)	-	Shaft Bore Dia. P_H7	-	Twisting Direction
KGEASH1.0 KGEAPTG1.5	- -	2020 3618	- -	6 10	-	R

■Straight Type

Part Number		Nominal	Shaft Bore Dia. P_H7 (1mm Increment)		Number of Teeth	R (Gear Ratio)	Mating Gear Number	B	H	d	D	S	E	L	G	ℓ₁	ℓ₂	L₁	A°	M (Coarse)
Type	Module	Nominal	Straight Bore Straight Bore + Tap	Keyway + Tap	Number of Teeth	R (Gear Ratio)	Mating Gear Number	B	H	d	D	S	E	L	G	ℓ₁	ℓ₂	L₁	A°	M (Coarse)
Straight Bore KGEASH KGEASHB KGEASHG KGHS Straight Bore + Tap KGEAST KGEASTB KGEASTG KGTS Keyway + Tap KGEASK KGEASKB KGEASKG KGKS	1.0	2020	6, 8	8	20	1:1	2020	4.3	16	20	21.41	11.8	21	14.53	11.71	9	4.5	13	49°3'	M4
		2525	6, 8, 10	8, 10	25		2525	5.3	20	25	26.41	15	23	14.7	11.21	8	4	13	48°51'	M4
		3030	8, 10, 12	8, 10, 12	30		3030	6.2	22	30	31.41	19.4	26	15.89	11.71	8.9	4.5	14.5	47°42'	M4 (M5)
		2040	6, 8	8	20	1:2	4020	5.7	16	20	21.79	12.1	29.6	15.03	10.05	8.6	4	14	29°8'	M4
		4020	8, 10, 12	8, 10, 12	40	1:2	2040	5.7	25	40	40.89	28.4	21.8	15.02	12.69	8	4	13	66°0'	M4 (M5)
	1.5	2020	10, 12	10, 12	20	1:1	2020	6.8	24	30	32.12	17.7	28	18.53	14.06	10	5	16.5	49°3'	M4
		2525	10~14	10~14	25		2525	7.5	30	37.5	39.62	23.7	34	21.26	16.31	11.5	5	19	48°51'	M4
		3030	12~16	12~16	30		3030	9.3	33	45	47.12	29.6	38	22.83	16.56	12.34	6	21	47°42'	M5
		1836	8, 10, 12	8	18	1:2	3618	9.8	22	27	29.68	12.2 (12.1)	40.74	22.96	14.41	12.5	6	21	29°25'	M4
		3618	10~15	10~15	36	1:2	1836	9.8	30	54	55.34	34.3	26.75	18.54	14.59	10	5	15.5	66°17'	M5
	2.0	2020	12~14	12~14	20	1:1	2020	8.5	34	40	41.32	23.9	37	24	18.41	14	7	21	49°3'	M5
		*2525	12~14	12~14	25		2525	10.5	42	50	51.33	32.3	40	23.34	16.41	10.99	5	21	48°51'	M5
		3030	16~18	16~18	30		3030	12.4	44	60	61.36	38.9	51	30.77	22.41	16.79	8	28	47°42'	M6
		1836	10	10	18	1:2	3618	12.6	28	36	37.81	19.1	53.12	29	18.01	15.12	7	27	29°25'	M4
		3618	12~14	12~14	36	1:2	1836	12.6	36	72	72.15	47.6	35.21	24.07	19	13	6.5	21	66°17'	M5

Sizes marked with * are only applicable to EN 1.1191 Equiv. Sizes in ( ) are for Stainless Steel 304. Module 1.0 is not available for KGHS (Straight Bore Type of EN 1.4301 Equiv.).
Spiral bevel gears from different manufacturers may not mesh correctly. Always select mating sets from MISUMI. Note.) The gears are sold in each piece qty, not as sets.
Specify 10K as the P dimension if keyway width of 4.0mm (height 1.8mm) for Keyway + Tap with shaft bore diameter of 10 is desired. >> P.1498
The set screw sizes are respectively M4x3, M5x4, and M6x5.

■Spiral Type (Spiral Angle 35°)

Part Number		Nominal	Shaft Bore Dia. P_H7 (1mm Increment)		Twisting Direction	Number of Teeth	R (Gear Ratio)	Mating Gear Number	B	H	d	D	S	E	L	G	ℓ₁	ℓ₂	L₁	A°	M (Coarse)
Type	Module	Nominal	Straight Bore + Tap	Keyway + Tap	Twisting Direction	Number of Teeth	R (Gear Ratio)	Mating Gear Number	B	H	d	D	S	E	L	G	ℓ₁	ℓ₂	L₁	A°	M (Coarse)
Straight Bore + Tap KGEAPT KGEAPTB KGEAPTG Keyway + Tap KGEAPK KGEAPKB KGEAPKG	1.0	2020	6, 8	8	L R	20	1:1	2020	4.5	16	20	21.12	11.3	21	14.43	11.56	9	4.5	13	50°31'	M4
		3030	10, 12	10, 12	(Left) (Right)	30	1:1	3030	6.2	22	30	31.09	19.4	26	15.67	11.54	9	4.5	14.5	48°21'	M5
		2040	8, 10, 12	8	L (Left)	20	1:2	4020	5.7	16	20	21.87	12.1	29.6	15	10.07	8.6	4	14	30°13'	M4
		4020	10, 12	10, 12	R (Right)	40	1:2	2040	5.7	25	40	40.41	28.4	21.8	14.57	12.21	8	4	13	65°36'	M5
	1.5	2020	10, 12	10, 12	L R	20	1:1	2020	7	24	30	31.85	17.2	28	18.44	13.93	10	5	16.5	50°5'	M4
		3030	12~16	12~16	(Left) (Right)	30	1:1	3030	9.3	33	45	46.79	29.7	38	22.64	16.4	12	6	21	47°54'	M5
		1836	8, 10, 12	8	L (Left)	18	1:2	3618	9.8	22	27	30.09	12.2	40.74	22.96	14.51	12.49	6	21	30°44'	M4
		3618	10~15	10~15	R (Right)	36	1:2	1836	9.8	30	54	54.76	34.3	26.75	18.01	14.01	9	4.5	15.5	65°57'	M5

Use Spiral Type in L and R sets.
Spiral bevel gears from different manufacturers may not mesh correctly. Always select mating sets from MISUMI. Note.) The gears are sold in each piece qty, not as sets.
Specify 10K as the P dimension if keyway width of 4.0mm (height 1.8mm) for Keyway + Tap with shaft bore diameter of 10 is desired. >> P.1498

Alterations

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
KGEAPKG1.0-2020-8-[L,R]
KGEAPKG1.0-2040-8-L
KGEAPKG1.0-3030-10K-[L,R]
KGEAPKG1.0-3030-[10,12]-[L,R]
KGEAPKG1.0-4020-10-R
KGEAPKG1.0-4020-10K-R
KGEAPKG1.0-4020-12-R
KGEAPKG1.5-1836-[10,12]-L
KGEAPKG1.5-2020-10-[L,R]
KGEAPKG1.5-2020-10K-[L,R]
KGEAPKG1.5-2020-12-[L,R]
KGEAPKG1.5-3030-[12,13,14,15,16]-[L,R]
KGEAPKG1.5-3618-10-R
KGEAPKG1.5-3618-10K-R
KGEAPKG1.5-3618-11-R
KGEAPKG1.5-3618-12-R
KGEAPKG1.5-3618-13-R
KGEAPKG1.5-3618-14-R
KGEAPKG1.5-3618-15-R
KGEAPTG1.0-2020-[6,8]-[L,R]
KGEAPTG1.0-2040-[10,12]-L
KGEAPTG1.0-3030-[10,12]-[L,R]
KGEAPTG1.0-4020-[10,12]-R
KGEAPTG1.5-1836-[10,12]-L
KGEAPTG1.5-2020-[10,12]-[L,R]
KGEAPTG1.5-3030-[12,13,14,15,16]-[L,R]
KGEAPTG1.5-3618-[10-15/1]-R
KGEASHG1.0-2020-[6,8]
KGEASHG1.0-2040-[6,8]
KGEASHG1.0-2525-10
KGEASHG1.0-3030-[10,12]
KGEASHG1.0-4020-[10,12]
KGEASHG1.5-1836-[10,12]
KGEASHG1.5-2020-[10,12]
KGEASHG1.5-2525-[10,12,13,14]
KGEASHG1.5-3030-[12,13,14,15,16]
KGEASHG1.5-3618-[10,12,13,14,15]
KGEASHG2.0-1836-10
KGEASHG2.0-2020-[12-14/1]
KGEASHG2.0-2525-[12-14/1]
KGEASHG2.0-3030-[16-18/1]
KGEASHG2.0-3618-[12-14/1]
KGEASKG1.0-2020-8
KGEASKG1.0-2040-8
KGEASKG1.0-2525-10K
KGEASKG1.0-2525-10
KGEASKG1.0-3030-10K
KGEASKG1.0-3030-[10,12]
KGEASKG1.0-4020-8
KGEASKG1.0-4020-10
KGEASKG1.0-4020-10K
KGEASKG1.0-4020-12
KGEASKG1.5-1836-8
KGEASKG1.5-2020-10K
KGEASKG1.5-2020-[10,12]
KGEASKG1.5-2525-10
KGEASKG1.5-2525-10K
KGEASKG1.5-2525-11
KGEASKG1.5-2525-12
KGEASKG1.5-2525-13

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Module	Shape	Number of Teeth (Teeth)	Reduction Ratio	Material	Tooth Width B (mm)	Surface Treatment	Shaft Bore Dia. P (Ø)	Shaft Hole Specifications	Nominal	Twisting Direction
-	1	10 Days	10	1	-	20	1	General Steel Material	4.5	Electroless Nickel Plating	8	Keyway + Tap	2020	Left [L] / Right [R]
-	1	10 Days	10	1	Spiral Type	20	2	General Steel Material	5.7	Electroless Nickel Plating	8	Keyway + Tap	2040	Left [L]
-	1	10 Days	10	1	-	30	1	General Steel Material	6.2	Electroless Nickel Plating	10	Keyway + Tap	3030	Left [L] / Right [R]
-	1	10 Days	10	1	-	30	1	General Steel Material	6.2	Electroless Nickel Plating	10 ～ 12	Keyway + Tap	3030	Left [L] / Right [R]
-	1	10 Days	10	1	Spiral Type	40	2	General Steel Material	5.7	Electroless Nickel Plating	10	Keyway + Tap	4020	Right [R]
-	1	10 Days	10	1	Spiral Type	40	2	General Steel Material	5.7	Electroless Nickel Plating	10	Keyway + Tap	4020	Right [R]
-	1	10 Days	10	1	Spiral Type	40	2	General Steel Material	5.7	Electroless Nickel Plating	12	Keyway + Tap	4020	Right [R]
-	1	10 Days	10	1.5	Spiral Type	18	2	General Steel Material	9.8	Electroless Nickel Plating	8 ～ 12	Keyway + Tap	1836	Left [L]
-	1	10 Days	10	1.5	-	20	1	General Steel Material	7	Electroless Nickel Plating	10	Keyway + Tap	2020	Left [L] / Right [R]
-	1	10 Days	10	1.5	-	20	1	General Steel Material	7	Electroless Nickel Plating	10	Keyway + Tap	2020	Left [L] / Right [R]
-	1	10 Days	10	1.5	-	20	1	General Steel Material	7	Electroless Nickel Plating	12	Keyway + Tap	2020	Left [L] / Right [R]
-	1	10 Days	10	1.5	-	30	1	General Steel Material	9.3	Electroless Nickel Plating	12 ～ 16	Keyway + Tap	3030	Left [L] / Right [R]
-	1	10 Days	10	1.5	Spiral Type	36	2	General Steel Material	9.8	Electroless Nickel Plating	10	Keyway + Tap	3618	Right [R]
-	1	10 Days	10	1.5	Spiral Type	36	2	General Steel Material	9.8	Electroless Nickel Plating	10	Keyway + Tap	3618	Right [R]
-	1	10 Days	10	1.5	Spiral Type	36	2	General Steel Material	9.8	Electroless Nickel Plating	11	Keyway + Tap	3618	Right [R]
-	1	10 Days	10	1.5	Spiral Type	36	2	General Steel Material	9.8	Electroless Nickel Plating	12	Keyway + Tap	3618	Right [R]
-	1	10 Days	10	1.5	Spiral Type	36	2	General Steel Material	9.8	Electroless Nickel Plating	13	Keyway + Tap	3618	Right [R]
-	1	10 Days	10	1.5	Spiral Type	36	2	General Steel Material	9.8	Electroless Nickel Plating	14	Keyway + Tap	3618	Right [R]
-	1	10 Days	10	1.5	Spiral Type	36	2	General Steel Material	9.8	Electroless Nickel Plating	15	Keyway + Tap	3618	Right [R]
-	1	10 Days	10	1	-	20	1	General Steel Material	4.5	Electroless Nickel Plating	6 ～ 8	Round Hole + Tap	2020	Left [L] / Right [R]
-	1	10 Days	10	1	Spiral Type	20	2	General Steel Material	5.7	Electroless Nickel Plating	8 ～ 12	Round Hole + Tap	2040	Left [L]
-	1	10 Days	10	1	-	30	1	General Steel Material	6.2	Electroless Nickel Plating	10 ～ 12	Round Hole + Tap	3030	Left [L] / Right [R]
-	1	10 Days	10	1	Spiral Type	40	2	General Steel Material	5.7	Electroless Nickel Plating	10 ～ 12	Round Hole + Tap	4020	Right [R]
-	1	10 Days	10	1.5	Spiral Type	18	2	General Steel Material	9.8	Electroless Nickel Plating	8 ～ 12	Round Hole + Tap	1836	Left [L]
-	1	10 Days	10	1.5	-	20	1	General Steel Material	7	Electroless Nickel Plating	10 ～ 12	Round Hole + Tap	2020	Left [L] / Right [R]
-	1	10 Days	10	1.5	-	30	1	General Steel Material	9.3	Electroless Nickel Plating	12 ～ 16	Round Hole + Tap	3030	Left [L] / Right [R]
-	1	10 Days	10	1.5	Spiral Type	36	2	General Steel Material	9.8	Electroless Nickel Plating	10 ～ 15	Round Hole + Tap	3618	Right [R]
-	1	10 Days	10	1	-	20	1	General Steel Material	4.3	Electroless Nickel Plating	6 ～ 8	Round Hole	2020	-
-	1	10 Days	10	1	Straight Type	20	2	General Steel Material	5.7	Electroless Nickel Plating	6 ～ 8	Round Hole	2040	-
-	1	10 Days	10	1	-	25	1	General Steel Material	5.3	Electroless Nickel Plating	6 ～ 10	Round Hole	2525	-
-	1	10 Days	10	1	-	30	1	General Steel Material	6.2	Electroless Nickel Plating	8 ～ 12	Round Hole	3030	-
-	1	10 Days	10	1	Straight Type	40	2	General Steel Material	5.7	Electroless Nickel Plating	8 ～ 12	Round Hole	4020	-
-	1	10 Days	10	1.5	Straight Type	18	2	General Steel Material	9.8	Electroless Nickel Plating	8 ～ 12	Round Hole	1836	-
-	1	10 Days	10	1.5	-	20	1	General Steel Material	6.8	Electroless Nickel Plating	10 ～ 12	Round Hole	2020	-
-	1	10 Days	10	1.5	-	25	1	General Steel Material	7.5	Electroless Nickel Plating	10 ～ 14	Round Hole	2525	-
-	1	10 Days	10	1.5	-	30	1	General Steel Material	9.3	Electroless Nickel Plating	12 ～ 16	Round Hole	3030	-
-	1	10 Days	10	1.5	Straight Type	36	2	General Steel Material	9.8	Electroless Nickel Plating	10 ～ 15	Round Hole	3618	-
-	1	10 Days	10	2	Straight Type	18	2	General Steel Material	12.6	Electroless Nickel Plating	10	Round Hole	1836	-
-	1	10 Days	10	2	-	20	1	General Steel Material	8.5	Electroless Nickel Plating	12 ～ 14	Round Hole	2020	-
-	1	10 Days	10	2	-	25	1	General Steel Material	10.5	Electroless Nickel Plating	12 ～ 14	Round Hole	2525	-
-	1	10 Days	10	2	-	30	1	General Steel Material	12.4	Electroless Nickel Plating	16 ～ 18	Round Hole	3030	-
-	1	10 Days	10	2	Straight Type	36	2	General Steel Material	12.6	Electroless Nickel Plating	12 ～ 14	Round Hole	3618	-
-	1	10 Days	10	1	-	20	1	General Steel Material	4.3	Electroless Nickel Plating	8	Keyway + Tap	2020	-
-	1	10 Days	10	1	Straight Type	20	2	General Steel Material	5.7	Electroless Nickel Plating	8	Keyway + Tap	2040	-
-	1	10 Days	10	1	-	25	1	General Steel Material	5.3	Electroless Nickel Plating	10	Keyway + Tap	2525	-
-	1	10 Days	10	1	-	25	1	General Steel Material	5.3	Electroless Nickel Plating	8 ～ 10	Keyway + Tap	2525	-
-	1	10 Days	10	1	-	30	1	General Steel Material	6.2	Electroless Nickel Plating	10	Keyway + Tap	3030	-
-	1	10 Days	10	1	-	30	1	General Steel Material	6.2	Electroless Nickel Plating	8 ～ 12	Keyway + Tap	3030	-
-	1	10 Days	10	1	Straight Type	40	2	General Steel Material	5.7	Electroless Nickel Plating	8	Keyway + Tap	4020	-
-	1	10 Days	10	1	Straight Type	40	2	General Steel Material	5.7	Electroless Nickel Plating	10	Keyway + Tap	4020	-
-	1	10 Days	10	1	Straight Type	40	2	General Steel Material	5.7	Electroless Nickel Plating	10	Keyway + Tap	4020	-
-	1	10 Days	10	1	Straight Type	40	2	General Steel Material	5.7	Electroless Nickel Plating	12	Keyway + Tap	4020	-
-	1	10 Days	10	1.5	Straight Type	18	2	General Steel Material	9.8	Electroless Nickel Plating	8	Keyway + Tap	1836	-
-	1	10 Days	10	1.5	-	20	1	General Steel Material	6.8	Electroless Nickel Plating	10	Keyway + Tap	2020	-
-	1	10 Days	10	1.5	-	20	1	General Steel Material	6.8	Electroless Nickel Plating	10 ～ 12	Keyway + Tap	2020	-
-	1	10 Days	10	1.5	-	25	1	General Steel Material	7.5	Electroless Nickel Plating	10	Keyway + Tap	2525	-
-	1	10 Days	10	1.5	-	25	1	General Steel Material	7.5	Electroless Nickel Plating	10	Keyway + Tap	2525	-
-	1	10 Days	10	1.5	-	25	1	General Steel Material	7.5	Electroless Nickel Plating	11	Keyway + Tap	2525	-
-	1	10 Days	10	1.5	-	25	1	General Steel Material	7.5	Electroless Nickel Plating	12	Keyway + Tap	2525	-
-	1	10 Days	10	1.5	-	25	1	General Steel Material	7.5	Electroless Nickel Plating	13	Keyway + Tap	2525	-

Products homepage

Basic information

Heat Treatment	Not Provided	Ground Tooth	Not Provided	Precision(* New JIS)	Grade 4
Shaft Bore Tolerance	H7

Configure

89Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Module
1

1.5

2
Clear
Shape
- Straight Type
- Spiral Type
Clear
Number of Teeth(Teeth)
18

20

25

30

36

40
Clear
Reduction Ratio
1

2
Clear
Material
- General Steel Material
- Stainless Steel
Clear
Tooth Width B(mm)
4.3

4.5

5.3

5.7

6.2

6.8

7

7.5

8.5

9.3

9.8

10.5

12.4

12.6
Clear
Shaft Bore Dia. P(Ø)
6

8

10

11

12

13

14

15

16

17

18
[10-18/1Ø Unit(s)]
Clear
Shaft Hole Specifications
- Keyway + Tap
- Round Hole
- Round Hole + Tap
Clear
Nominal
- 1836
- 2020
- 2040
- 2525
- 3030
- 3618
- 4020
Clear
Twisting Direction
- Left [L]
- Right [R]
Clear
Type
- KGEAPK
- KGEAPKB
- KGEAPKG
- KGEAPT
- KGEAPTB
- KGEAPTG
- KGEASH
- KGEASHB
- KGEASHG
- KGEASK
- KGEASKB
- KGEASKG
- KGEAST
- KGEASTB
- KGEASTG
- KGHS
- KGKS
- KGTS
Clear
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
Clear
Filter by CAD data type
- 2D
- 3D
Clear