Timing belt connecting plates / XL, L, H, T#, AT#, S#M, MA# / aluminium

Click on this image to zoom in.

Promotional pricing ends 30/11/2024
Volume Discount

View the FAQ (8)

MISUMI

Order quantities extended (D-JIT)
Stock

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog

Back to the Category Timing Belt

Technical Drawing - Timing Belts

Timing Belt Clamp Plate/Overpressure Prevention/Fixed Hole Position:Related Image

Open the technical drawing in the new window

Basic Properties (e.g., material, hardness, coating, tolerance) - Timing Belts

Material: EN AC-51400-T5 Equiv.
Surface Treatment: Clear Anodize
Accessory: Hex Socket Head Cap Screw

Further specifications can be found under the tab More information.

Composition of a Product Code - Timing Belts

Part Number

Type	Belt Type	Belt Nominal Width
TBCK	- XL	025

General Information - Timing Belts

Timing Belt Selection Details

- Material: chloroprene rubber (neoprene), polyurethane (PU)

- Tension cord: glass fibre, aramid fibre, steel

- Width (mm): 1 to 101.6

- Width (in.): 0.19 to 4

- Profile (metric): T5, T10, AT5, AT10, S2M, S3M, S5M, S8M, S14M, MTS8M, EV5GT, EV8YU, 2GT, 3GT, MA3, MA5, MA8, P2M, P3M, P5M, P8M, UP5M, UP8M

- Profile (in.): MXL, XL, L, H

Description/Basics

Timing belts for mechanical engineering are intended for force and power transmission. Depending on the interlocking of the profile, they can alternatively be used for the material flow (transportation) or for positioning.
Timing belts are more maintenance-friendly, efficient and durable compared to roller chains.

Maintenance-friendly: timing belts do not require lubrication, are easy to replace and are very durable, as they do not sag. These properties significantly reduce maintenance costs.

Efficient: drive belts are largely made of natural rubber or polyurethane. As a result, timing belts withstand high speeds. A further advantage of these materials is the weight reduction compared to conventional metal drives. Timing belts are also known for low-noise running and contribute to the general smooth running of an application.

Durability: due to the inserted tension cord made of glass fibre or aramid fibre (Kevlar), timing belts can withstand high tensile stresses and do not tend to sag. An additional layer of nylon fabric on the interlocked side reduces wear due to abrasion and increases the service life.

Timing belts can be used in many ways. The belt profile that suits your application depends on the task of the timing belt. MISUMI offers a suitable belt profile for almost every type of application.

Drive: timing belts are used even at high torque. Drive belts with a rounded trapezoidal profile (e.g., S8M) are often used to drive mechanical components. These are particularly well suited for slip-free transmission of high forces, which can occur in drives of various applications or machines.

Positioning: a semi-circular profile (e.g., GT) is often used for positioning via timing belts. Round profile timing belts are often used in 3D printers and precise scanners. The round shape also offers the advantage that there is little play (reverse play) when the direction changes.

Material flow: timing belts can also be used to transport loads in conveyor systems. A straight trapezoidal profile is often used for this purpose (e.g., AT ). This profile provides a large profile area for load intake and transmission. The MISUMI range also includes conveyor timing belts with nylon fabric on the bearing surface.

An overview of the profile forms by application type can be found in the PDF Overview.

The amount of transmission power depends on many factors. The exact maximum load must be considered and calculated individually according to the application. The calculation for timing belts can be found in the selection of Timing Belts as PDF.
In order not to fall below the minimum number of teeth, the minimum size of the timing pulleys should be considered individually.
In general, a timing belt should be provided with the appropriate pretension to maximize the service life of the timing belt. If the pretension is too low, a jump (slip) can cause wear of the timing belt.

Application Examples - Timing Belts

Application example: synchronous belt - with screw-on terminal and drive belt - synchronous belt for positioning

Application example: workpiece carrier
(1) Stopper bolt with rubber, (2) belt conveyor, (3) workpiece carrier

Application example: synchronous belt drive - synchronous pulley with crimp disc - idler pulley with crimp disc - synchronous tensioner

Application example: of toothed belt drives
(1) Toothed belt, (2) driven Timing pulleys with crimp disc, (3) idler pulley with crimp disc, (4) driving Timing pulleys with crimp disc

Application example: Timing belt
(1) Linear guide, (2) mounting plate, (3) Timing belt, (4) Screw-on terminal

Application example - linear ball bushing and linear shaft synchronous belt - synchronous belt with flange bearings

Application example: Timing belt
(1) Bolt-on terminal, (2) Timing belt, (3) Linear shaft, (4) Linear bushings

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
TBCK-AT10200
TBCK-AT10250
TBCK-AT5150
TBCK-H075
TBCK-H100
TBCK-H150
TBCK-H200
TBCK-L050
TBCK-L075
TBCK-L100
TBCK-MA3070
TBCK-MA3100
TBCK-MA3150
TBCK-MA5100
TBCK-MA5150
TBCK-MA5250
TBCK-MA8150
TBCK-MA8200
TBCK-MA8250
TBCK-MA8400
TBCK-S3M060
TBCK-S5M100
TBCK-S5M150
TBCK-S5M250
TBCK-S8M150
TBCK-S8M250
TBCK-S8M300
TBCK-S8M400
TBCK-T10150
TBCK-T10200
TBCK-T10250
TBCK-T10300
TBCK-T10400
TBCK-T10500
TBCK-T5100
TBCK-T5150
TBCK-T5200
TBCK-T5250
TBCK-XL025
TBCK-XL037
TBCK-XL050

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	Belt Type	Belt Width (mm) (mm)	Belt Width (Inch) (Inch)
23.66 €	1	Available	Same day Stock	10	AT10	20	-
24.16 €	1	Available	Same day Stock	10	AT10	25	-
17.71 €	1	Available	Same day Stock	10	AT5	15	-
29.98 €	1	Available	5 Days	10	H	19.1	0.75
30.25 €	1	Available	5 Days	10	H	25.4	1
31.64 €	1	Available	5 Days	10	H	38.1	1.5
33.01 €	1	Available	5 Days	10	H	50.8	2
21.26 €	1	Available	5 Days	10	L	12.7	0.5
21.75 €	1	Available	5 Days	10	L	19.1	0.75
22.13 € 15.49 €	1	Available	Same day Stock	10	L	25.4	1
18.48 €	1	Available	5 Days	10	MA3	7	-
18.73 €	1	Available	5 Days	10	MA3	10	-
18.86 €	1	Available	5 Days	10	MA3	15	-
19.73 €	1	Available	5 Days	10	MA5	10	-
20.00 €	1	Available	5 Days	10	MA5	15	-
23.03 €	1	Available	5 Days	10	MA5	25	-
25.55 €	1	Available	5 Days	10	MA8	15	-
26.06 €	1	Available	5 Days	10	MA8	20	-
26.56 €	1	Available	5 Days	10	MA8	25	-
26.94 €	1	Available	5 Days	10	MA8	40	-
13.79 €	1	Available	5 Days	10	S3M	6	-
17.33 €	1	Available	5 Days	10	S5M	10	-
17.58 €	1	Available	Same day Stock	10	S5M	15	-
19.23 €	1	Available	5 Days	10	S5M	25	-
21.13 €	1	Available	5 Days	10	S8M	15	-
21.64 €	1	Available	5 Days	10	S8M	25	-
22.13 €	1	Available	5 Days	10	S8M	30	-
22.52 €	1	Available	5 Days	10	S8M	40	-
23.28 € 16.30 €	1	Available	Same day Stock	10	T10	15	-
23.66 €	1	Available	5 Days	10	T10	20	-
24.16 €	1	Available	Same day Stock	10	T10	25	-
24.79 €	1	Available	5 Days	10	T10	30	-
26.32 €	1	Available	5 Days	10	T10	40	-
27.57 €	1	Available	5 Days	10	T10	50	-
17.47 €	1	Available	Same day Stock	10	T5	10	-
17.71 €	1	Available	Same day Stock	10	T5	15	-
18.86 €	1	Available	Same day Stock	10	T5	20	-
19.49 €	1	Available	5 Days	10	T5	25	-
15.69 €	1	Available	5 Days	10	XL	6.4	0.25
15.69 €	1	Available	5 Days	10	XL	9.5	0.37
16.19 €	1	Available	5 Days	10	XL	12.7	0.5

Back to the Category Timing Belt

Technical Drawing - Timing Belts

Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.

Specification Tables - Timing Belts

Part Number			W	A	B	T₁	T₂	T₃	h	L	P	M	d	Included	Number of Mounting Holes	Unit Price
Type	Belt Type	Belt Nominal Width												Screw
TBCK (+)	XL	025	6.4	66	24	6	4.5	2.10	1.30	56	13	M4	4.5	M4-10	6
		037	9.5		26						16
		050	12.7		30						20
	L	050	12.7	124	32	8	5.5	3.33	2.05	111	21	M5	5.5	M5-12	8
		075	19.1		38						27
		100	25.4		46						34
	H	075	19.1	165	38	10	6.5	4.15	2.55	147	27			M5-14
		100	25.4		46						34
		150	38.1		58						46
		200	50.8		70						59
	S3M	060	6	39	18	4	3.5	1.94	1.25	31	11	M3	3.4	M3-6	6
	S5M	100	10	65	26	6	5.5	3.14	2.00	51	17	M4	4.5	M4-10
		150	15		32						22
		250	25		42						32
	S8M	150	15	104	34	8	6.5	4.72	3.00	84	23	M5	5.5	M5-12	8
		250	25		44						33
		300	30		50						38
		400	40		60						48
	MA3	070	7	39	20	4	3.5	1.8	1.1	31	13	M3	3.4	M3-6	6
		100	10		24						16
		150	15		29						21
	MA5	100	10	65	26	6	5.5	2.9	1.7	51	17	M4	4.5	M4-10
		150	15		32						22
		250	25		42						32
	MA8	150	15	104	34	8	6.5	4.3	2.8	84	23	M5	5.5	M5-12	8
		200	20		39						28
		250	25		44						33
		400	40		60						48
	T5	100	10	65	26	6	4.5	2.20	1.40	51	17	M4	4.5	M4-10	6
		150	15		32						22
		200	20		38						27
		250	25		43						32
	T10	150	15	130	34	8	6.5	4.30	2.70	111	23	M5	5.5	M5-12	8
		200	20		40						28
		250	25		44						33
		300	30		50						38
		400	40		60						48
		500	50		70						58
	AT5	150	15	65	32	6	4.5	2.6	1.40	51	22	M4	4.5	M4-10	6
	AT10	200	20	130	40	8	6.5	4.30	2.70	111	28	M5	5.5	M5-12	8
		250	25		44						33

This product is designed to be compatible with the Open End Belts (Urethane Type). The tooth profile complies with the Timing Belts and the Open End Belts.
When using this product for other types of belts, check the back thickness of the belts and dimensions of this product before use. The A Dimension is set for engaging 6 teeth (fitting).

Products homepage

Basic information

Belt shape	Belt Clamp Plates

Configure

41Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Stock

- Show only stock items
Clear

Basic Attributes

Belt Type
- XL
- L
- H
- T5
- T10
- AT5
- AT10
- S3M
- S5M
- S8M
- MA3
- MA5
- MA8
Clear
Belt Width (mm)(mm)
6

6.4

7

9.5

10

12.7

15

19.1

20

25

25.4

30

38.1

40

50

50.8
Clear
Belt Width (Inch)(Inch)
0.25

0.37

0.5

0.75

1

1.5

2
Clear
Type
- TBCK
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

Same day

5 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently Asked Questions (FAQ)

Question:
Where does the idler pulleys have to be placed on the timing belt?: Answer:
As a rule, the idler pulleys are positioned on the slack side, since the tension of the timing belt is here lowest during operation. Ideally, the timing belt is tensioned from the inside, because this prevents the timing belt from bending alternately. This is particularly recommended for timing belts with a steel tension cord. The idler pulley should always be larger than the smallest timing pulley of the belt drive system.
Question:
For what purpose can a timing belt with a round profile be used for?: Answer:
Round profile timing belts can be used in many applications. These are well suited for transmitting torque. In addition, the reverse play is very low due to the round profile shape with changing direction of rotation. The timing belts are also well suited for highly precise positioning. Timing belts with a round tooth profile can therefore often be found in 3D printers.
Question:
Can multiple belts be used for the transfer?: Answer:
A transmission can take place via one or more timing belts. If an equal distribution of the forces across the individual belts is not possible, it must be ensured that one belt alone can withstand the maximum load. In order to enable uniform distribution of forces, a precise adjustment is necessary. For this purpose, a toothed belt disc with clamping sleeve can be used, because it can be adjusted continuously and ensure uniform distribution.
Question:
Can a timing belt used for transmission?: Answer:
With timing belts, a gear ratio or reduction in a drive is possible. The gear ratio is established based on the number of teeth on the pulleys. It should be ensured that the minimum number of teeth of the timing pulley disc is not undercut.
Question:
What is the possible tensile stress for timing belts?: Answer:
The maximum allowable tension for MISUMI timing belts depends on the belt type, speed of rotation and belt pulley diameter. For more information, click on this link.
Question:
What is the minimum size of timing pulleys?: Answer:
The minimum size or the minimum number of teeth of a timing pulley depends on the belt type used and the height of the applied speed or rotation. You can find more detailed information about the minimum number of teeth of timing pulley discs in the selection of Timing Pulleys available as a PDF.
Question:
Does a timing belt stretch a lot?: Answer:
As opposed to a roller chain, the expansion is small. The length extension of timing belts is very stable. Therefore, it is not absolutely necessary to re-tension the timing belt during operation, as is necessary for chain drives. This makes the timing belt very easy to maintain compared to the chain. However, it should be ensured that the timing belt is free of oil, as the natural rubber could swell.
Question:
What is the purpose of a timing belt?: Answer:
The primary task of a timing belt is the synchronous and slip-free transmission of force or power. Depending on the task, various profile shapes are available for timing belts. These can be roughly divided into drive, conveying and positioning. In the following overview, you can view the various areas of use: Overview as PDF