Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!

Potwierdzono

Belt Width
- 6
[T] Number of Teeth
- 32
Pulley Shape
- Shape A
Material
Aluminium
2000 Series Aluminum Alloy (Duralumin)
Surface Treatment
- Hard Clear Anodize
Shaft Bore Specifications (Round Hole + Tap) [P](mm)
[4–10/1mm jedn.]
Type
- HTPK□□S2M
CAD
- 2D
- 3D
Szacowane dni wysyłki
- Wszystko
- W ciągu 6 dni robocze

Dodatkowa opcje

Change an Angle of Set Screw to 90° [KC](°)
- 90
Flange not swaged when shipped
- NFC
Flange swaged only on the hub side when shipped
- RFC
Flange swaged only on the opposite side of the hub when shipped
- LFC
Flange Cut [FC](mm)
[22–23/0.5mm jedn.]
Tapped Hole Dimension Change [TPC](mm)
- 3
- 4
Set Screw Length Change [SLH](mm)
- 5
- 6

MISUMI

Timing belt pulleys / S2M / flanged pulley selectable / configurable / material selectable / treatment selectable (HTPK32S2M060-A-P4)

KatalogS. 1-1397

Przestroga

Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.

Numer części:

HTPK32S2M060-A-P4

Cena jednostkowa (bez VAT)
20.80 €
Łącznie (bez VAT)
20.80 €
Cena z VAT:
24.75 €
Data wysyłki
7 dni robocze
Referencyjna data wysyłki: 30.07.2025

Ilość ?	1 - 30	31 - 149	150 - 249	250 - 349	350 - 500	501 - 1000	1001+
Cena jednostkowa (bez VAT) (Cena jednostkowa z VAT)	20.80 € ( 24.75 € )	13.35 € ( 15.89 € )	13.35 € ( 15.89 € )	13.35 € ( 15.89 € )	13.35 € ( 15.89 € )	13.35 € ( 15.89 € )	13.35 € ( 15.89 € )
Shipping days	7 days	7 days	12 days	13 days	14 days	15 days	Quote

Rysunek konturowy i tabela specyfikacji
Lista numerów części
Szczegółowe informacje
Katalog

Rysunek konturowy i tabela specyfikacji

Back to the Category Toothed Pulleys/Timing Pulleys/Idler Pulleys

Technical Drawing - Toothed Pulleys/Timing Pulleys/Idler Pulleys

High Torque Timing Pulleys S2M Type:Related Image

Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More Information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Type	Belt Width			Material *¹		Surface Treatment	Accessory *¹ Set Screw
	4mm	6mm	10mm	Pulley	Flange
	S2M040	S2M060	S2M100	Pulley	Flange
HTPA	●	●	●	A2000 Aluminum Alloy	Aluminum Alloy	Clear Anodize	EN 1.4301 Equiv.
HTPB	●	●	●			Black Anodize
HTPK	●	●	●			Hard Clear Anodize *²
HTPN	●	●	●			Electroless Nickel Plating
HTPT	●	●	-	EN 1.1191 Equiv.	EN 1.0330 Equiv.	-	EN 1.7220 Equiv. (Black Oxide)
HTPM	●	●	-			Black Oxide
HTPP	●	●	-			Electroless Nickel Plating
HTPS	●	●	-	EN 1.4301 Equiv.	EN 1.4301 Equiv.	-	EN 1.4301 Equiv.

Flange is installed, and set screws are included with Shaft Bores P, N and C. *1. The above material and accessory might be changed to the ones equivalent to the originals.
*2. Hard Clear Anodize: Film Hardness 300HV ~

Further specifications can be found under the tab More Information.

Composition of a Product Code - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Part Number

Pulley Shape

Shaft Bore Specs., I.D.

(Shaft Bore Specs.: H, P, N, C)

HTPA48S2M040

N10

(Shaft Bore Specs.: V, F)

HTPA60S2M060

V10

Z17

J14.2

(Shaft Bore Specs: Y)

HTPA36S2M100

Q10

R10

Alterations - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Here to the Overview of Options as PDF .

Lista numerów części

Liczba pozycji

Numer części

HTPK32S2M060-A-P4

Belt Width

[T] Number of Teeth

Pulley Shape

Material

Surface Treatment

Shaft Bore Specifications (Both Ends Stepped Hole) [Y]

(mm)

Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N]

(mm)

Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C]

(mm)

Shaft Bore Specifications (Round Hole + Tap) [P]

(mm)

Shaft Bore Specifications (Round Hole) [H]

(mm)

Shaft Bore Specifications (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK]

Shaft Bore Specifications (Stepped Hole) [V]

(mm)

Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F]

(mm)

RoHS?

Minimalna wielkość zamówienia

Shape A

[Aluminium] 2000 Series Aluminum Alloy (Duralumin)

Hard Clear Anodize

1 szt.

Cena jednostkowa (bez VAT)(Cena jednostkowa z podatkiem)	Standardowa data wysyłki

(

)

6 dni robocze

Podstawowe informacje

Przestroga

Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.

Dane techniczne

Kontury i specyfikacja

Back to the Category Toothed Pulleys/Timing Pulleys/Idler Pulleys

Technical Drawing - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Open the technical drawing in the new window

Specification Tables - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Part Number

Pulley
Shape

Pulley Shape

Type

Number of Teeth

Type
Nominal Width

B • K

Shaft Bore Specifications (~): Specify in 1mm Increment, (, ): Select the former or latter

H
Round Hole

P
Round Hole + Tap

N, C
Keyway + Tap

V
Stepped Hole

Y
Both Ends Stepped

H
Round Hole

P
Round Hole + Tap

N, C
Keyway + Tap

V, F
Stepped Hole

Z
Z-d≥2

J
(0.1mm Increment)

Q, R
Q(R)-d≥2

S, T

V, F

Z
Z-d≥2

J
(0.1mm Increment)

Aluminum
HTPA
HTPB
HTPK
HTPN

Steel
HTPT
HTPM
HTPP

Stainless Steel
HTPS

S2M040

S2M060

S2M100

A

K

3, 4

3, 4, 5

2.0≤J≤W-2.0

3~6
S+T≤W-3

3, 4, 5

2.0≤J≤L-2.0

3, 4, 5

3~6

3, 4

5, 6

3, 4

5, 6

3~6

3, 4

5, 6

3, 4

5, 6

3~6

3, 4

5, 6

3, 4

5, 6

3~6

3~6, 6.35, 7

3, 4, 5

5, 6, 7

3, 4, 5

5, 6, 7

3~6, 6.35, 7

3, 4, 5

5, 6, 7

3, 4, 5

5, 6, 7

3~6, 6.35, 7

3~6, 6.35, 7, 8

3~6

5~8

3~6

5~8

3~6, 6.35, 7, 8

3~6

5~8

3~6

5~8

3~6, 6.35, 7, 8

3~6

5~8

3~6

5~8

3~6, 6.35, 7, 8

A

B

4~6, 6.35, 7~10

4~7

6~10

4~7

6~10

4~6, 6.35, 7, 8

4, 5, 6

4~6

6~8

4~6, 6.35, 7~10

8, 10, NK10

4~7

6~10

4~7

6~10

4~6, 6.35, 7~10

4~6, 6.35, 7, 8

4~6

6~8

4~6, 6.35, 7~10

8, 10, NK10

4~8

6~11

4~8

6~11

4~6, 6.35, 7~10

4~6, 6.35, 7, 8

4~8

6~10

4~6, 6.35, 7~12

8, 10, NK10, 11, 12

4~10

6~12

4~10

6~12

4~6, 6.35, 7~13

4~6, 6.35, 7~10

4~10

6~12

5, 6, 6.35, 7~15

5, 6, 6.35, 7~13

8, 10, NK10, 11~13

5~13

7~15

5~13

7~15

5, 6, 6.35, 7~15

5, 6, 6.35, 7~12

8, 10, NK10, 11

5~13

7~15

5, 6, 6.35, 7~17

5, 6, 6.35, 7~15

8, 10, NK10, 11~15

5~15

7~17

5~15

7~17

5, 6, 6.35, 7~16

5, 6, 6.35, 7~12

8, 10, NK10, 11

5~14

7~16

5, 6, 6.35, 7~17

5, 6, 6.35, 7~16

8, 10, NK10, 11~16

5~15

7~24

5~15

7~24

5, 6, 6.35, 7~16

5, 6, 6.35, 7~12

8, 10, NK10, 11

5~14

7~16

5, 6, 6.35, 7~24

5, 6, 6.35, 7~22

8, 10, NK10, 11~22

5~22

7~24

5~22

7~24

5, 6, 6.35, 7~25

5, 6, 6.35, 7~22

8, 10, NK10, 11~16

5~22

7~24

5, 6, 6.35, 7~30

5, 6, 6.35, 7~24

8, 10, NK10, 11~22

5~28

7~30

7~28

7~30

5, 6, 6.35, 7~30

5, 6, 6.35, 7~24

8, 10, NK10, 11~17

5~24

7~26

Shaft Bore Dia. 8, 11, 13, 14, 17, 21, 22 are not available for Shaft Bore Spec. C.

Alterations - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Here to the Option Overview PDF

General Information - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Toothed pulley - synchronous pulley - belt pulley - product assortment

Selection details of toothed pulleys/timing pulleys/idler pulleys

- Material: aluminum, steel, stainless steel (stainless steel), plastic

- Coatings: uncoated, burnished, anodized, nickel-plated

- Profile form: 1.5GT, 2GT, 3GT, 5GT, P2M, P3M, P5M, P8M, S2M, S3M, S5M, S8M, S14M, T2.5, T5, T10, AT5, AT10, 5M, 8M, 14M, 8YU, H, L, MXL, XL, PowerGrip GT3: MR2, MR3, MR5

- ISO tolerances: H7

- Belt width (mm): 4, 4.8, 6, 6.4, 7, 7.9, 9, 9.5, 10, 12, 12.7, 15, 18, 19.1, 20, 25, 25.4, 26, 28, 30, 31, 38,1, 40, 50, 50.8, 53, 60, 74, 76.2, 100

- Belt width (inches): 0.19, 0.25, 0.31, 0.37, 0.5, 0.75, 1, 1.5, 2

- Number of teeth: 10 to 72

Description/Basics

The toothed pulley for mechanical engineering is intended for the transmission of force and torque. Timing pulleys enable a gear ratio of speeds through belt pulleys of different sizes. Timing pulleys are more efficient, durable and significantly more maintenance-friendly compared to chain transmissions.

How much torque and load a timing pulley can transmit depends on the width of the belt. The width of the belt must be calculated. It is recommended to ensure the belt is correctly tensioned. MISUMI already offers the suitable idler pulley and return rollers with integrated ball bearings. For design and design help follow this link.

Different profile shapes of the toothed belts and belt pulleys are responsible for the transmission of power. Depending on the positioning accuracy, the applied torque and the conveying weight, MISUMI offers the fitting pulley. Toothed belt drives are generally used in the industry in three areas:
Positioning: Timing pulleys is often used in 3D printers. A toothed pulley with a semi-circular profile (e.g., GT) is often used for the required position accuracy of a 3D printers. The round shape offers the benefit of little play when the direction changes.
Drive: toothed pulleys are also used for high torque. In most cases, a timing pulley with a rounded trapezoidal profile (e.g., S8M) is used. These are particularly well suited for the transmission of high forces, which occur in drives of various applications in order to drive mechanical components.
Conveying: toothed pulleys can also be used for transporting loads. A straight trapezoidal profile is often used for this purpose (e.g., AT). This toothed pulley shape offers a large surface for loading and transmitting of loads.

Which toothed pulley or timing pulley is the right one for your application depends on the respective task of the toothed belt drive. Different toothed disc profiles have proven themselves for each type of application.

Various bore hole shapes and fastening variants are available for shaft mounting. These allow fastening via set screws, keyways and by means of Mecha locks. Fastening via a clamping sleeve has the further advantage that it allows adjusting the alignment continuously. The MISUMI product assortment has these ready-to-install.

Application Examples - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Application example: idler pulley - idler pully toothed with chain tensioner - toothed pulley with chain tensioner

Application example: idler pulley
(1) Idler pulleys, (2) chain tensioner

Application example: return roller - return roller with cantilever pin - synchronous pulley with on-board disc - toothed pulley with on-board disc

Application example: deflection roller
S (1) Toothed pulleys with crimp disc, (2) nut, (3) washer, (4) cantilever shaft, (5) retaining ring

Application example: synchronous pulleys - toothed pulleys with toothed belts - toothed pulley with screw-on clamp

Application example: timing pulleys
(1) Flat head screw, (2) Timing pulley, (3) Timing belt, (4) Screw-on terminal

Application example: toothed belt drives - toothed pulleys with crimp disc - idler pulley with crimp disc - tensioning of the toothed belt

Application example: of toothed belt drives
(1) Toothed belt, (2) driven toothed pulley with crimp disc, (3) idler pulley with crimp disc, (4) driving toothed pulley with crimp disc