Rejestracja

Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Potwierdzono
  • O.D. D(mm)
      [6–7/0.5mm jedn.]
    • I.D.(mm)
        [3–4/0.5mm jedn.]
      • Thickness/Length(mm)
          [3–10/0.1mm jedn.]
        • Material
          • Stainless Steel
        • Surface Treatment
        • Thickness/Length Tolerance
        • Hardness(HRC)
        • Shoulder Dia. H(mm)
            [8–9/0.5mm jedn.]
          • Shoulder Thickness T(mm)
              [1–5/0.1mm jedn.]
            • Type
            • CAD
            • Szacowane dni wysyłki
              • Wszystko
              • W ciągu 9 dni robocze

            Spacer Washers / Flange / Steel, Stainless Steel / Treatment Selectable / 45-55 HRC (FTCMS-D6-H9-V3-T2-L6)

            Spacer Washers / Flange / Steel, Stainless Steel / Treatment Selectable / 45-55 HRC FTCMS-D6-H9-V3-T2-L6

            Umieść kursor myszy nad ilustracją, aby ją powiększyć

            Numer części:

            FTCMS-D6-H9-V3-T2-L6
            Wyczyść
            Ilość:
            Loading...

            Rysunek konturowy i tabela specyfikacji

            Standard Grade
            Precision Grade

            [ ! ] Circumference chamfering C0.5 or less
            Part Number[M] Material[S] Surface Treatment[ H ]Hardness
            Standard GradePrecision Grade
            FTCSSSteel for general structure
            FTCCFTCMCEN 1.1191 Equiv.
            FTCBFTCMBBlack Oxide
            FTCMFTCMMElectroless Nickel Plating
            FTCRFTCMRLow Temp. Black Chrome Plating
            FTCAA2000 Series Aluminum AlloyClear Anodize
            FTCABBlack Anodize
            FTCBBBEN CW614N Equiv.
            FTCSUEN 1.4301 Equiv.
            FTCSURLow Temp. Black Chrome Plating
            FTCSKEN 1.2510 Equiv.55HRC or more
            FTCSKBBlack Oxide
            FTCSKMElectroless Nickel Plating
            FTCSUSEN 1.4401 Equiv.
            FTCSFTCMSEN 1.4125 Equiv.45 to 50HRC
            [ ! ] Stainless steel hardened type (FTCS, FTCMS) may be discolored by hardening.
            [ ! ] I.D. part of low temp. black chrome plating may have a thinner coating or partially untreated.

            Specification Table

            Part NumberDHVTL
            FTCMSD25H30V8.0T2.0L5.0
            ■Standard Grade
            Part NumberDHV
            0.5 mm Increments
            (V Dimension 3 or More)
            T
            0.1 mm Increments
            L
            0.1 mm Increments
            Standard Grade
            FTCSS
            FTCC
            FTCB
            FTCM

            FTCR
            FTCAA
            FTCAB

            FTCBBB
            FTCSU
            FTCSUR
            FTCSK
            FTCSKB
            FTCSKM

            FTCSUS
            FTCS
            5.0 to 9.0
            (0.5 mm Increments)
            7.0 to 12.0
            (0.5 mm Increments)
            (Selection)
            2
            2.6


            (0.5 mm Increments)
            3.0 to 58.0
            1.0 to 8.02.0 to 10.0
            9.5 to 20.0
            (0.5 mm Increments)
            11.5 to 25.0
            (0.5 mm Increments)
            21 to 30
            (1 mm increments)
            23 to 40
            (1 mm increments)
            31 to 40
            (1 mm increments)
            33 to 50
            (1 mm increments)
            41 to 50
            (1 mm increments)
            43 to 60
            (1 mm increments)
            51 to 60
            (1 mm increments)
            53 to 70
            (1 mm increments)
             [ ! ] Machining conditions [ ! ] T ≤ L−1 [ ! ] Machining conditions of material SKS3 equivalent (FTCSK, FTCSKB, FTCSKM) [ ! ] 2 ≤ T ≤ L−2 
             DHV DHV          
             For 5 to 20D+2 ≤ H ≤ D × 1.5V ≤ D−2    For 5 to 10D+2 ≤ H ≤ D × 1.4V ≤ D−2          
             For 21 to 40D+2 ≤ H ≤ D × 1.4V ≤ D−4For 10.5 to 30V ≤ D−4          
             For 41 to 60D+2 ≤ H ≤ D × 1.2V ≤ D−6  For 31 to 60D+2 ≤ H ≤ D × 1.2V ≤ D−6          
            ■Precision Grade
            Part NumberDHV
            0.5 mm Increments
            (V Dimension 3 or More)
            T
            0.1 mm Increments
            L
            0.1 mm Increments
            Precision Grade
            FTCMC
            FTCMB
            FTCMM

            FTCMR
            FTCMS
            5.0 to 9.0
            (0.5 mm Increments)
            7.0 to 12.0
            (0.5 mm Increments)
            (Selection)
            2
            2.6


            (0.5 mm Increments)
            3.0 to 58.0
            1.0 to 8.02.0 to 10.0
            9.5 to 20.0
            (0.5 mm Increments)
            11.5 to 25.0
            (0.5 mm Increments)
            21 to 30
            (1 mm increments)
            23 to 40
            (1 mm increments)
            31 to 40
            (1 mm increments)
            33 to 50
            (1 mm increments)
            41 to 50
            (1 mm increments)
            43 to 60
            (1 mm increments)
            51 to 60
            (1 mm increments)
            53 to 70
            (1 mm increments)
             [ ! ] Machining conditions [ ! ] T ≤ L−1 [ ! ] Machining conditions of material SKS3 equivalent (FTCSK, FTCSKB, FTCSKM) [ ! ] 2 ≤ T ≤ L−2     
             DHV DHV          
             For 5 to 20D+2 ≤ H ≤ D × 1.5V ≤ D−2    For 5 to 10D+2 ≤ H ≤ D × 1.4V ≤ D−2          
             For 21 to 40D+2 ≤ H ≤ D × 1.4V ≤ D−4For 10.5 to 30V ≤ D−4          
             For 41 to 60D+2 ≤ H ≤ D × 1.2V ≤ D−6  For 31 to 60D+2 ≤ H ≤ D × 1.2V ≤ D−6          

            Alterations

            Part NumberDHVTL(TCB·TCC·TCD·TCE·TSA·TSB·TSC·TSD·TSE·VKC·DKC·HKC)
            FTCMMD25H30V8.0T2.0L5.0                  TSC − VKC
            [ ! ] When both I.D./O.D. tolerance changes are specified, the concentricity is ø0.02.
            [NG] Not applicable to anodized products. [NG] Not applicable to hardened type (products with hardness indications [H]).
            AlterationsCodeSpec.AlterationsCodeSpec.
            I.D. Tolerance



            VKCChanges the I.D. Tolerance to H7.
            Ordering Code VKC
            Machining conditions
            [ ! ]D ≥ 6 V ≥ 3
             
            DD-V
            6 to 10D-V ≥ 2
            10.5 to 20D-V ≥ 3
            21 to 30D-V ≥ 6
            31 to 40D-V ≥ 8
            41 to 50D-V ≥ 10
            51 to 60D-V ≥ 12
            O.D. Tolerance



            DKC
            (g6)
            HKC
            (h7)
            Changes the O.D. tolerance to g6
            or h7.
            Ordering code DKC, HKC
            Machining conditions
            [ ! ] When D ≥ 43, T ≥ 1.5
            [ ! ]D ≥ 6
            DD-V
            6 to 10D-V ≥ 2
            10.5 to 20D-V ≥ 3
            21 to 30D-V ≥ 6
            31 to 40D-V ≥ 8
            41 to 50D-V ≥ 10
            51 to 60D-V ≥ 12
            [NG] Not applicable to anodized products. [NG] Not applicable to hardened type (products with hardness indications [H]).
            AlterationsNegative TolerancePositive ToleranceZero, Negative ToleranceZero, Positive Tolerance
            Standard Grade T ToleranceCodeTCBTCCTCDTCE

            [ ! ] Applicable to standard grade
            Changes shoulder thickness tolerance (T)
            T -0.1-0.3

            Ordering code TCB   
            Changes shoulder thickness tolerance (T)
            T +0.3+0.1

            Ordering code TCC   
            Changes shoulder thickness tolerance (T)
            T 0-0.2

            Ordering code TCD   
            Changes shoulder thickness tolerance (T)
            T +0.2 0

            Ordering code TCE   
             
            AlterationsShoulder Thickness ToleranceNegative TolerancePositive ToleranceZero, Negative ToleranceZero, Positive Tolerance
            Precision Grade T ToleranceCodeTSATSBTSCTSDTSE

            [ ! ] Applicable to precision grade
            Changes shoulder thickness tolerance (T)

            T ±0.025

            Ordering code TSA  
            Changes shoulder thickness tolerance (T)
            T -0.01-0.06

            Ordering code TSB  
            Changes shoulder thickness tolerance (T)
            T +0.06+0.01

            Ordering code TSC   
            Changes shoulder thickness tolerance (T)
            T 0-0.05

            Ordering code TSD   
            Changes shoulder thickness tolerance (T)
            T +0.05 0

            Ordering code TSE   

            Lista numerów części

            Liczba pozycji
            Numer części
            FTCMS-D6-H9-V3-T2-L6

            Features, Areas of Application

            O.D. D

            (mm)

            I.D.

            (mm)

            Thickness/Length

            (mm)

            Material

            Surface Treatment

            Thickness/Length Tolerance

            Hardness

            (HRC)

            Precision

            Shoulder Dia. H

            (mm)

            Shoulder Thickness T

            (mm)

            RoHS?Minimalna wielkość zamówienia
            -
            6
            3
            6
            [Stainless Steel] EN 1.4037 Equiv.
            Not Provided
            ±0.01
            45~50HRC
            Precision Grade
            9
            2
            10
            1 szt.
            Cena jednostkowa (bez VAT)(Cena jednostkowa z podatkiem)
            Standardowa data wysyłki
            -
            ( - )
            9 dni robocze

            Szczegółowe informacje

            Kontury i specyfikacja

            General Information - Washers/Collars (metal)

             

             

            Selection Details of Discs and Sleeves

            - Material: steel, stainless steel, aluminum, brass, tool steel
            - Coating: untreated, burnished, nickel-plated, LTBC coating, anodized, chrome-plated
            - Basic shapes: straight, with collar, sleeve, disc, front panel with open oblong hole
            - Designs: through hole, two through holes, bolt circle, oblong hole, counterbore, conical counterbore, internal thread
            - Hardness: up to ~55HRC
            - ISO tolerances: g6, h7
            - Inner diameter: 0 mm to 90 mm
            - Outer diameter: 3 mm to 100 mm
            - Length: 1 mm to 200 mm

             

            Overview of the various designs as PDF

             

            Description/Basics

            A spacer sleeve or distance washer serves as a spacer in mechanical engineering to maintain a predetermined position. Unlike the known washers, spacer sleeves and distance washers are not punched. Spacer sleeves, which are also known as spacer sleeves, have a precise length. Their length tolerance (precision class) is up to +/- 0.01 mm. A spacer sleeve can therefore also be used as a bearing sleeve of rolling bearings.
            These metal sleeves and discs are available at MISUMI either unhardened or hardened. Particularly hard discs and sleeves have a high level of wear resistance. Stainless steel sleeves and stainless steel washers are well protected against oxidation in corrosive environments. Spacer sleeves or distance sleeves can be configured with collar (flange). The height of the government is also tolerated and can also be used for maintaining a distance.

            Due to the individual configuration of the distance sleeve and spacer washer, they offer nearly an unlimited use in mechanical engineering.

             

            Areas of Application

            The spacer sleeve or distance washer is suitable for many mechanical engineering applications due to its tolerable height. Compared to the commercially available washer, the distance washer can have a larger bearing surface. The special form as a countersunk washer is well suited for shaft mounting at the shaft end.
            The precisely manufactured spacer sleeve is suitable for precisely maintaining a distance between two components. If several sleeves are necessary for this, MISUMI offers simultaneous grinding spacer sleeves. Due to the matched length of the grinding distance sleeves, which are used as a set (min. 2 pieces), a flat surface can be formed. In addition, the simultaneously ground sleeves can reduce play, because the height difference from one another is limited to +/- 5μ.
            Alternatively, the metal disc or the metal collar can be suitable as a spring disk in order to serve a pressure spring as a receiver or stopper.

            At MISUMI, you can configure the distance washer and distance sleeve to your specifications and order it online. The additionally selectable options extend the design freedom of the metal collars and metal discs.

             

            Materials

            Metal collars and metal discs in steel, tool steel and stainless steel are available in the MISUMI online shop. Stainless steel sleeves and washers provide good corrosion resistance and can be used in corrosive environments.

            Alternatively, MISUMI offers discs and sleeves made of plastic and ceramic as well as thermally insulating materials for special environmental influences.
            In addition, MISUMI offers discs and sleeves made of rubber and felt, which can work with diverse properties, e.g., antistatic and vibration damping.

             

            Coatings

            MISUMI sleeves and discs are available uncoated, burnished, nickel-plated, LTBC-coated, anodized and chrome-plated versions to protect metal sleeves and metal washers from corrosion and wear.

             

            Dimensions

            Overview of the geometric variants as PDF

             

            Standard class and precision class of the spacer sleeve


            (1) Spacer sleeve – standard class, (2) spacer sleeve – precision class

             

            Standard class and precision class of the spacer disc


            (1) Spacer washer – standard class, (2) spacer washer – precision class

             

            Application Examples - Washers/Collars (metal)

            (1) Plate, (2) spacer washer, (3) screw – hexagon socket

            (1) Screw, (2) metal washer, (3) metal collar, (4) natural rubber plate

            (1) Spacer sleeve, (2) ball bearing, (3) rotary shaft

            (1) Distance sleeve/spacer sleeve

             

            Supplementary Article

             

            Ball bearing

             

            Shims

             

            Washers / Collars (Non-Metal, Plastic)

             

            Washers / Collars (Urethane, Rubber, Sponge, Felt)

             

            Shoulder bolts

             

            Industrial Applications

             

            3D printer industry
            Automotive industry
            Pharmaceutical industry
            Packaging industry

            Nie znaleziono podobnych produktów dla tej pozycji.
            Numer części został potwierdzony