Rejestracja
Warunki filtrowania
  • Post Dia.(mm)
  • Thickness Type
  • D1
  • P
    • Type
    • CAD
    • Szacowane dni wysyłki
      • Wszystko
      • W ciągu 7 dni robocze
    MISUMI

    Parallel Configuration / Different Diameter / Selectable Pitch (KKQT20-15-40)

    Parallel Configuration / Different Diameter / Selectable Pitch KKQT20-15-40

    Numer części:

    KKQT20-15-40
    Wyczyść
    Ilość:

    Rysunek konturowy i tabela specyfikacji

    Strut Clamps - Unequal Dia., Parallel Holes, Pitch Selectable, Dimensional Drawing
    D=10·12
    D=15 to 35
    Stepped Section
    Details
    Standard
    Thin
    [!] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m. However, B, C and C1 dimensions and slit width 2 mm tolerance are excluded.
    Type[M] Material[S] Surface Treatment[A] Accessory
    StandardThin
    KKQ KKQT EN 1.0038 Equiv.Black OxideHex Socket Head Cap
    Screws
    ■Included Screw
    DIncluded Screw
    (Thin Type has 1 screw on each side.)
    Equal Dia., ParallelUnequal Dia., Parallel
    8M5-12, 2 pcs.—
    10M5-15, 2 pcs.M5-12/M5-10, 1 pc. each
    12M5-15, 2 pcs.M5-15, 2 pcs.
    15M5-20, 4 pcs.M5-20/M5-15, 2 pcs. each
    20M6-25, 4 pcs.M6-25/M6-20, 2 pcs. each
    25M6-30, 4 pcs.M6-30/M6-20, 2 pcs. each
    30M8-35, 4 pcs.M8-35/M8-30, 2 pcs. each
    35M8-40, 4 pcs.M8-40/M8-35, 2 pcs. each

    Specification Table

    Part Number-D1-P
    KKQT20-15-30
    Part NumberD1H7P
    Selection    		ABB1CC1EGHKSMd
    TypeDH7
    Standard
    KKQ    		Thin
    KKQT     		10+0.015
    0    		8+0.015
    0    		152025      A = P+E+G1612169151498—M55.5
    12+0.018
    0    		1015202530     16141691615109—
    1522162212181512911
    20+0.021
    0    		15+0.018
    0    		 20253040    282228162219151214M66.6
    25  25304050   322232192519181216
    3020+0.021
    0    		   30405075  402840192923211520M89
    35+0.025
    0    		25     5075100150453245223225241824
    [!] The tolerance and parallelism of DH7 and D1H7 are the values measured before slit machining.
    [!] Recommended tolerance of mating shafts is g6 and f8. Tightening with a long wrench is recommended.

    Lista numerów części

    Liczba pozycji
  • 1
    • Numer części
    KKQT20-15-40

    Post Dia.

    (mm)

    Thickness Type

    D1

    P

    		RoHS?Minimalna wielkość zamówienia
    20
    Thin
    15
    40
    10
    1 szt.
    Cena jednostkowa (bez VAT)(Cena jednostkowa z podatkiem)
    Standardowa data wysyłki
    -
    ( - )
    7 dni robocze
  • 1

    • Szczegółowe informacje

    Podstawowe informacje

    Brace clamp used to fix 2 tripod braces side by side. [Material] EN 1.0038 Equiv.