[Precision] X / Y / Z-Axis Selectable

Click on this image to zoom in.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

[Precision] X/Y/Z-Axis Selectable:Related Image

Specifications

Part Number	-	Feed Position	-	Feeding Method	-	Clamp Type	-	Grease
FSXYR40	-	C	-	F	-	S	-	R

Part Number			Stage Used
Type	Axis	Guide	Stage Used
FS	X	R	XSG (P.1921)
	X	C	XPG (P.1918)
	XY	R	XYSG (P.1946)
	Z	R	ZSG (P.1966)

* Refer to the stage with the same size as the table.
Guide Type R: Linear Ball Slide
C: Cross Roller Slide

Stage

Feed Position

Feeding Method

Clamp Type

Grease

Axis

Type

Size

Unit Price

Center/Side

Micrometer Head (Stroke: mm)

Price

Feed Screw
(Pitch/Stroke: mm)

Price

Selection

Price

Selection

Price

X-Axis

FSXR
(Linear Ball)

(Center): A, AR
: AZ, AZR
(Side) : C, CR
: CZ, CZR

N (Standard ±3.2)

N:
M:
D:

F (Hex Socket 0.5/±3.2)
B (Feed Screw 0.5/±3.2)

F, B, J:

S (Standard)

S:
H:
P:

G (Standard)
R (Clean Env. Compatible)^*2

G:
R:

N (Standard ±6.5)
M (Coarse Fine Feed ±6.5)

F (Hex Socket 0.5/±6.5)
B (Feed Screw 0.5/±6.5)
J (Feed Screw 1.0/±6.5)

S (Standard)
H (Disc)
P (Opposed) Applicable only when C and CR, and the feed type is N or F.

N (Standard ±12.5)
M (Coarse Fine Feed ±6.5)
D (Digital Micrometer ±12.5)
*1. Only applicable to feed position A ,AR and C.

S (Standard)
H (Disc)

FSXC
(Cross Roller)

(Center): A, AR
: AZ
(Side) : C, CR
: CZ

*3

N (Standard ±3.2)

N:
M:

B (Feed Screw 0.5/±3.2)

S (Standard)

G (Standard)

G:
R:

N (Standard ±6.5)
M (Coarse Fine Feed ±6.5)

N (Standard ±12.5)
M (Coarse Fine Feed ±6.5)

XY-Axis

FSXYR (Linear Ball)

(Center): A, AR
(Side) : C, CR

N (Standard ±3.2)

N:
M:
D:

F (Hex Socket 0.5/±3.2)
B (Feed Screw 0.5/±3.2)

F, B, J:

S (Standard)

S:
H:
P:

G (Standard)
R (Clean Env. Compatible)^*2

G:
R:

N (Standard ±6.5)
M (Coarse Fine Feed ±6.5)

F (Hex Socket 0.5/±6.5)
B (Feed Screw 0.5/±6.5)
J (Feed Screw 1.0/±6.5)

S (Standard)
H (Disc) Only applicable to C, CR.
P (Opposed) Applicable only when C and CR, and the feed type is N or F.

N (Standard ±12.5)
M (Coarse Fine Feed ±6.5)
D (Digital Micrometer ±12.5)
*1. Only applicable to feed position A and AR.

S (Standard)
H (Disc) Only applicable to C, CR.

Z-Axis

FSZR
(Linear Ball)

(Center) : AZ,
AZR
(Side) : C, CR
: CZ,
CZR
Feeding direction of C, CR is upward; that of the others is downwards.

N (Standard ±3.2)

N:
M:

F (Hex Socket 0.5/±3.2)
B (Feed Screw 0.5/±3.2)

F, B, J:

S (Standard)

S:
H:
P:

G (Standard)
R (Clean Env. Compatible)^*2

G:
R:

N (Standard ±6.5)
M (Coarse Fine Feed ±6.5) Not applicable to C, CR.

F (Hex Socket 0.5/±6.5)
B (Feed Screw 0.5/±6.5)
J (Feed Screw 1.0/±6.5)

S (Standard)
H (Disc)
P (Opposed) Applicable only when C and CR, and the feed type is N or F.

N (Standard ±12.5)
M (Coarse Fine Feed ±6.5) Not applicable to C, CR.

S (Standard)
H (Disc)

*1. Only clamp position will be changed for Digital Micrometer A and AR. *2. When feed type M (coarse/fine feeds) or D (digital micrometer) is selected, grease R (clean env. compatible) is not applicable. *3. Combination with M, B is not available for cross roller stages AZ and CZ. Combination with B is not available for cross roller stages with Table Size 80.

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
FSXC80-A-[M,N]-S-G
FSXC80-AR-[M,N]-S-G
FSXC80-AZ-N-S-G
FSXC80-C-[M,N]-S-G
FSXC80-CR-[M,N]-S-G
FSXC80-CZ-N-S-G
FSXR80-A-[B,D,F,J,M,N]-[H,S]-[G,R]
FSXR80-AR-[B,D,F,J,M,N]-[H,S]-[G,R]
FSXR80-AZ-[B,F,J,M,N]-[H,S]-[G,R]
FSXR80-AZR-[B,F,J,M,N]-[H,S]-[G,R]
FSXR80-C-[B,D,F,J,M,N]-[H,S]-[G,R]
FSXR80-CR-[B,F,J,M,N]-[H,S]-[G,R]
FSXR80-CZ-[B,F,J,M,N]-[H,S]-[G,R]
FSXR80-CZR-[B,F,J,M,N]-[H,S]-[G,R]
FSXYR80-A-[B,D,F,J,M,N]-S-[G,R]
FSXYR80-AR-[B,D,F,J,M,N]-S-[G,R]
FSXYR80-C-[B,F,J,M,N]-[H,S]-[G,R]
FSXYR80-CR-[B,F,J,M,N]-[H,S]-[G,R]

Minimum order quantity	Standard Shipping Days ?	RoHS	Table Size (Length) L (Range Selectable) (mm)	Table Size (Width) W (Range Selectable) (mm)	Load Capacity (Range Selectable) (N)	Stroke (Distance along X-Axis) (Range Selectable) (mm)	Stroke (Distance along Y-Axis) (Range Selectable) (mm)	Table Material	Table Surface Treatment	Guiding Mechanism	Table Size (Thickness) H (Range Selectable) (mm)	Table Size (Length) L (mm)	Table Size (Width) W (mm)	Horizontal Load Capacity (N)	Stroke (X Distance) (mm)	Stroke (Y Distance) (mm)	Table Size (Thickness) H (mm)	Stroke (Z Distance) (mm)	Table Parallelism (µm)	Moment Rigidity (Pitching) ("/N•cm)	Moment Rigidity (Yawing) ("/N•cm)	Moment Rigidity (Rolling) ("/N•cm)	Feed Knob Position	Reversed	Grease Selection	Clamp Method Selection	Feeding Method Selection
1	9 Days	10	61-90	61-90	50.1 to 100	±10 to 30mm	-	Aluminum Alloy	Black Anodized Aluminum	Cross Roller	15.1-20	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Center	Standard	G (Standard)	Standard [S]	Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1	9 Days	10	61-90	61-90	50.1 to 100	±10 to 30mm	-	Aluminum Alloy	Black Anodized Aluminum	Cross Roller	15.1-20	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Center	Right and Left	G (Standard)	Standard [S]	Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1	9 Days	10	61-90	61-90	50.1 to 100	±10 to 30mm	-	Aluminum Alloy	Black Anodized Aluminum	Cross Roller	15.1-20	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Center	Up/Down	G (Standard)	Standard [S]	Standard Micrometer Head [N]
1	9 Days	10	61-90	61-90	50.1 to 100	±10 to 30mm	-	Aluminum Alloy	Black Anodized Aluminum	Cross Roller	15.1-20	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Side	Standard	G (Standard)	Standard [S]	Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1	9 Days	10	61-90	61-90	50.1 to 100	±10 to 30mm	-	Aluminum Alloy	Black Anodized Aluminum	Cross Roller	15.1-20	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Side	Right and Left	G (Standard)	Standard [S]	Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1	9 Days	10	61-90	61-90	50.1 to 100	±10 to 30mm	-	Aluminum Alloy	Black Anodized Aluminum	Cross Roller	15.1-20	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Side	Up/Down	G (Standard)	Standard [S]	Standard Micrometer Head [N]
1	9 Days	-	61-90	61-90	100.1 or More	±10 to 30mm	-	[Stainless Steel] EN 1.4125 Equiv.	Electroless Nickel Plating	Linear Ball	15.1-20	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Center	Standard	G (Standard) / R (For Clean Environment)	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N]
1	9 Days	-	61-90	61-90	100.1 or More	±10 to 30mm	-	[Stainless Steel] EN 1.4125 Equiv.	Electroless Nickel Plating	Linear Ball	15.1-20	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Center	Right and Left	G (Standard) / R (For Clean Environment)	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N]
1	9 Days	10	61-90	61-90	100.1 or More	±10 to 30mm	-	[Stainless Steel] EN 1.4125 Equiv.	Electroless Nickel Plating	Linear Ball	15.1-20	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Center	Up/Down	G (Standard) / R (For Clean Environment)	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1	9 Days	10	61-90	61-90	100.1 or More	±10 to 30mm	-	[Stainless Steel] EN 1.4125 Equiv.	Electroless Nickel Plating	Linear Ball	15.1-20	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Center	Top/Bottom, Right/Left	G (Standard) / R (For Clean Environment)	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1	9 Days	10	61-90	61-90	100.1 or More	±10 to 30mm	-	[Stainless Steel] EN 1.4125 Equiv.	Electroless Nickel Plating	Linear Ball	15.1-20	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Side	Standard	G (Standard) / R (For Clean Environment)	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N]
1	9 Days	10	61-90	61-90	100.1 or More	±10 to 30mm	-	[Stainless Steel] EN 1.4125 Equiv.	Electroless Nickel Plating	Linear Ball	15.1-20	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Side	Right and Left	G (Standard) / R (For Clean Environment)	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1	9 Days	10	61-90	61-90	100.1 or More	±10 to 30mm	-	[Stainless Steel] EN 1.4125 Equiv.	Electroless Nickel Plating	Linear Ball	15.1-20	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Side	Up/Down	G (Standard) / R (For Clean Environment)	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1	9 Days	10	61-90	61-90	100.1 or More	±10 to 30mm	-	[Stainless Steel] EN 1.4125 Equiv.	Electroless Nickel Plating	Linear Ball	15.1-20	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Side	Top/Bottom, Right/Left	G (Standard) / R (For Clean Environment)	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1	9 Days	-	61-90	61-90	100.1 or More	±10 to 30mm	±10 to 30mm	[Stainless Steel] EN 1.4125 Equiv.	Electroless Nickel Plating	Linear Ball	35.1-40	80	80	255.8	±12.5	±12.5	40	-	40	0.06	0.08	0.06	Center	Standard	G (Standard) / R (For Clean Environment)	Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N]
1	9 Days	-	61-90	61-90	100.1 or More	±10 to 30mm	±10 to 30mm	[Stainless Steel] EN 1.4125 Equiv.	Electroless Nickel Plating	Linear Ball	35.1-40	80	80	255.8	±12.5	±12.5	40	-	40	0.06	0.08	0.06	Center	Right and Left	G (Standard) / R (For Clean Environment)	Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N]
1	9 Days	10	61-90	61-90	100.1 or More	±10 to 30mm	±10 to 30mm	[Stainless Steel] EN 1.4125 Equiv.	Electroless Nickel Plating	Linear Ball	35.1-40	80	80	255.8	±12.5	±12.5	40	-	40	0.06	0.08	0.06	Side	Standard	G (Standard) / R (For Clean Environment)	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1	9 Days	10	61-90	61-90	100.1 or More	±10 to 30mm	±10 to 30mm	[Stainless Steel] EN 1.4125 Equiv.	Electroless Nickel Plating	Linear Ball	35.1-40	80	80	255.8	±12.5	±12.5	40	-	40	0.06	0.08	0.06	Side	Right and Left	G (Standard) / R (For Clean Environment)	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

More Information

Knob Cover HDCVR13 (Sold Separately): Ø13 micrometer knob diameter can be increased by installing the cover. Here
Extension Cover HDEXT13 (Sold Separately): Feed knob of Ø13 micrometer head and feed screw can be extended. Here

Products homepage

Basic information

Through Hole (Table Center Hole)	Not Provided

Configure

18Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Table Size (Length) L (Range Selectable)(mm)
- ≤ 25
- 26-40
- 41-60
- 61-90
Clear
Table Size (Width) W (Range Selectable)(mm)
- ≤ 25
- 26-40
- 41-60
- 61-90
Clear
Load Capacity (Range Selectable)(N)
- 5 to 30
- 30.1 to 50
- 50.1 to 100
- 100.1 or More
Clear
Stroke (Distance along Y-Axis) (Range Selectable)(mm)
Up to ±10mm

±10 to 30mm
Clear
Table Material
- Stainless Steel
  - EN 1.4125 Equiv.
- Aluminum Alloy
Clear
Table Surface Treatment
- Black Anodized Aluminum
- Electroless Nickel Plating
Clear
Guiding Mechanism
- Cross Roller
- Linear Ball
Clear
Table Size (Thickness) H (Range Selectable)(mm)
1-15

15.1-20

20.1-25

30.1-35

35.1-40
Clear
Table Size (Length) L(mm)
25

40

50

60

70

80
Clear
Table Size (Width) W(mm)
25

40

50

60

70

80
Clear
Horizontal Load Capacity(N)
9.8

19.6

38.2

39.2

49

95.2

98

144.2

147

192.1

196

219.7

225.4

255.8

264.6
Clear
Stroke (X Distance)(mm)
±3.2

±6.5

±12.5
Clear
Stroke (Y Distance)(mm)
±3.2

±6.5

±12.5
Clear
Table Size (Thickness) H(mm)
12

15

16

18

20

24

32

36

40
Clear
Stroke (Z Distance)(mm)
±3.2

±6.5

±12.5
Clear
Feed Knob Position
- Center
- Side
Clear
Reversed
- Standard
- Right and Left
- Up/Down
- Top/Bottom, Right/Left
Clear
Grease Selection
- G (Standard)
- R (For Clean Environment)
Clear
Clamp Method Selection
- Disc Clamp [H]
- Opposed Clamp [P]
- Standard [S]
Clear
Feeding Method Selection
- Feed Screw Pitch 0.5 [B]
- Screw with Hex Socket, Pitch 0.5 [F]
- Feed Screw Pitch 1.0 [J]
- Coarse/Fine Micrometer Head [M]
- Digital Micrometer Head [D]
- Standard Micrometer Head [N]
Clear
Type
- FSXC
- FSXR
- FSXYR
- FSZR
Clear
Stroke (Distance along X-Axis) (Range Selectable)(mm)
Up to ±10mm

±10 to 30mm
Clear
Filter by CAD data type
- 2D
- 3D
Clear