Rejestracja
Warunki filtrowania
  • Stan magazynowy
  • Bearing I.D. d(mm)
  • Bearing Material
    • Steel
    • Holder Material
      • EN AW-2017 Equiv.
    • Thickness T(mm)
    • Bearing Part Number
    • Flange Outer Dia. H(Ø)
    • Type
    • CAD
    • Szacowane dni wysyłki
      • Wszystko
      • Możliwa wysyłka tego samego dnia
      • W ciągu 8 dni robocze
      • W ciągu 10 dni robocze
    • Bearing housings / flange selectable, stepped / counterbore, internal thread / retaining ring / deep groove ball bearing / material selectable / coating selectable

      Numer części:

      Znaleziono następującą liczbę niepotwierdzonych proponowanych produktów: 944.
      Ilość:

      Rysunek konturowy i tabela specyfikacji

      Back to the Category Bearings with Housing

      Technical Drawing - Bearings with Housing

      Direct Mount/Standard/Retained:Related Image

      Available dimensions and tolerances can be found under the tab More information.
       

      Basic Properties (e.g., material, hardness, coating, tolerance) - Bearings with Housing
       
      TypeMaterialSurface TreatmentAccessory Retaining Ring
      RoundSquareCompactBearingHousingHousing
      BGRABBGSABBGCABSteelEN 1.1191 Equiv.Black OxideSpring Steel
      BGRABGSABGCAElectroless Nickel PlatingEN 1.4301 Equiv.
      BARABASABACAAluminum Alloy 2000 seriesClear AnodizeEN 1.4301 Equiv.
      SBARASBASASBACA* Stainless Steel
      SBGRASBGSASBGCAEN 1.4301 Equiv.-
      * Bearings with Rubber Seals (VV and DD) are all made of steel.

      Further specifications can be found under the tab More information.
      Information about tolerances can be found under ball bearing table / tolerances as PDF

       

      Composition of a Product Code - Bearings with Housing
       
      Part Number
       
      Type Bearing Seal
      BGRAB
      BGSA
       6000
      6900
       ZZ
      DD

      Note: the bearing number used is included in the bearing housing part number.

      Alterations - Bearings with Housing


      Direct Mount/Standard/Retained:Related Image
       

      General Information - Bearings with Housing

       

      Bearing housing assortment - flange bearing - pedestal bearing T-shape - pedestal bearing L-shape - flange bearing housing - bearing housing straight - bearing with housing

       

      Bearings with Housing/Bearing Housings/Bearing Units Selection Details

      - Housing material: aluminum, steel, stainless steel

      - Coatings: uncoated, burnished, anodized, nickel-plated

      - Ball bearing material: steel, stainless steel

      - ISO tolerances: Ball bearing table/tolerances available as PDF

      - bearing housing types: round flange, square flange, compact flange, guide flange, T-shape, L-shape, block shape

      - Ball bearing types: deep groove ball bearings, angular ball bearings

      - Inner diameter: from 3 mm to 50 mm

       

      The variety of bearing housings can be found in the Overview of the Types of Pedestal Bearings available as a PDF.

      The different designs of the flange bearings can be found in the Overview of the Types of Flange Bearing Housing available as PDF.

       

      Description/Basics

      Bearing housings are highly robust and allow for easy and quick assembly. They are used to accommodate rotating machine elements in mechanical engineering. The housing bearings are generally provided for receiving rotary shafts or torsional shafts. Bearing housing types include pedestal bearings, flange bearings, tension bearings, and pillow blocks. They can be fitted with simple ball bearings. However, there are bearing housings in which angular contact ball bearings are installed that can also absorb axial forces. Housing bearings are available with single-row, double-row and three-row deep-groove ball bearings or angular contact ball bearings. The different designs of the bearing housings can be used horizontally or vertically. For horizontal mounting, MISUMI offers bearing housings as a vertical pedestal bearing in L- and T-shape, as well as a square bearing block. Flange bearing housings, also called flange bearings, are often used for vertical mounting. A bearing unit from MISUMI, whether a pedestal bearing or a flange bearing, is available in double or triple bearings (with rolling bearings) to absorb any lever forces.
      The ball bearings are secured in the bearing housings with retaining rings or bearing covers. The bearing can thus be replaced as needed.

       

      Two-row and multi-row bearing housings

      Multi-row bearing housings are well-suited for applications subjected to lever forces. They can contribute to increased rotational stability as a flange bearing housing or a pedestal bearing housing.
      The flange bearing with angular ball bearing and screwed bearing cover can be used as a fixed bearing. In this case, a floating bearing is recommended in the assembly group.
      The combination of fixed and floating bearings can ensure length compensation. This prevents an undesirable compression of a shaft or a threaded drive. A compression can create an imbalance and thus vibrations in an application and lead to inaccuracy


      Example of double row flange bearing - three row flange bearing - flange bearing housing with grooved ball bearing - flange bearing housing with angular ball bearing - bearing with housing

      Example – multi-row bearing housing – (1) deep groove ball bearing, (2) flange bearing housing, (3) bearing cover, (4) bearing cover screw, (5) angular ball bearing, (6) spacer sleeve, (7) spacer sleeve for inner ring

       

      Ball bearing seals for bearing housings

      ZZ (2Z): double encapsulated
      VV (2RZ): contactless rubber seal
      DD (2RS): contact rubber seal (slightly increased friction)

       

      Areas of Application

      MISUMI’s bearing housings, flange bearings and pedestal bearings can be used in almost all applications. Bearing housings are often used as flange bearings or pedestal bearings for the bearing of ball screws and rotary shafts. In addition, they are often found in conveyor belts, or in the bearings of shafts in timing belts, as well as chain transmission. As a fixed and floating bearing, the bearing units can withstand high loads and speeds of rotation. In addition, the encapsulated or sealed bearings are protected from external influences.

       

      Materials

      Bearing unit housings are available in steel, stainless steel, and aluminum. Due to the alterations of selecting the ball bearings, a pedestal bearing housing or flange bearing housing can consist of various types of materials. The bearing housings are optionally installed with steel or stainless steel ball bearings. In addition, a bearing housing that can be used as a fixed bearing can additionally be provided on the bearing housing with a rubber seal.

       

      Coatings

      MISUMI’s pedestal bearings and flange bearings made of steel can be optionally burnished, painted, chemically nickel-plated. The aluminum bearing housings can be anodized to provide the best possible protection against corrosion depending on the need or the environmental conditions.

       

      Dimensions

      Types of pedestal bearings

      Shape

      Mounting method

      Features

      T-shape (extruded)

      Pedestal bearing extruded - pedestal bearing housing T-shape - bearing housing with retaining ring - bearing housing corners rounded - bearing with housing

      - economically extruded housing
      - up to 30% less expensive than milled housings
      - higher security thanks to rounded corners

      T-shape

      Pedestal bearing T-shape - bearing housing with retaining ring - pedestal bearing housing corners chamfered - bearing with housing

      - stable despite its narrow design
      - available for high positioning accuracy with groove
      - optionally with lubricant for low particle formation

      L-shape

      Bearing housing L-shape - pedestal bearing narrow - bearing housing with retaining ring - bearing with housing

      - Low width

      Block shape (internal thread)

      Bearing housing block shape with female thread - pedestal bearing bottom mounting - bearing block with female thread - bearing with housing

      - Fastened from underneath through the internal thread
      - Compact design for limited installation space

      Block shape

      Bearing housing block shape with through hole - pedestal bearing with through hole - bearing block with hole - pedestal bearing housing block shape - bearing with housing

      - Low assembly height

      Straight

      Bearing housing straight - bearing housing side mounting - bearing housing with cross hole - bearing housing end assembly - bearing with housing

      - Fastening from the front
      - Compact design for limited installation space
      - Offset design with height accuracy +/- 0.02 mm

      Table – Application of pedestal bearings


      Flange bearing designs

      Ball bearing

      Design

      utilisation

      Easy

      Small diameter flange bearing - flange bearing housing with counterbore - flange bearing flat - bearing housing round - flange bearing

      - Can be used at several shaft positions
      - Space-saving version available with small diameter

      With centering collar
      Flange bearing with centering collar - flange bearing housings with centering - flange bearing with collar - flange bearing

      - Often used to secure multiple locations
      - The centering collar can be used for positioning

      Double

      Heavy duty Flange bearing housing - double flange bearing - two-ball bearings - flange bearing

      - Suitable for heavy loads
      - Additional support of the shaft
      - Length freely selectable

      With centering collar
      Flange bearing housing double with centering collar - flange bearing with centering - flange bearing with two ball bearings - flange bearing

      - Suitable for heavy loads
      - The centering collar can be used for positioning
      - Length freely selectable

      Table – Flange Bearing Application

       

      Instructions for Use / Installation Information - Bearings with Housing

       

      Installation Information

      When assembling bearing housings, care must be taken to ensure that they are installed without tension to prevent vibration, noise and damage. The holes or threads on the mounting surface should therefore be positioned as accurately as possible to prevent stresses on the shaft or spindle. In addition, dowel pins in the base plate can be a helpful option. Also, when installing the bearing housings, make sure that the contact surfaces are clean.
      In addition, MISUMI offers special types of bearing housings, which have a positioning groove on the underside to predetermine a precise alignment.


      Bearing housing assembly with dowel pin - bearing housing assembly with keyway - pedestal bearing positioning - pedestal bearing housing assembly

      Application example – pedestal bearing mounting with dowel pin, pedestal bearing mounting with keyway, (1) dowel pin

      The alteration [NA] allows for the bearing housings and ball bearings not to be delivered pre-assembled. This can significantly simplify assembly depending on the assembly procedure.
      In some variants with angular contact bearings, the bearings must be greased during assembly.
       

      Flange bearing housing with female thread

      MISUMI offers another special form with the flange bearing with female thread. This flange bearing has the advantage that it can be mounted from the front and the rear. This flange bearing housing provides high mounting flexibility and the ability to standardize and reduce the variety of bearing housings.


      Female threaded bearing housing - flange-type female threaded bearing housing - flange-type and female threaded bearing

      Application example – (1) Flange bearing housing assembly with female thread, (2) flange bearing housing mounting with counterbore


      Bearing housing for axial load

      If high axial forces occur, MISUMI offers a special form of flange bearings in the combination of needle bearings for radial forces and axial ball bearings for axial forces.


      Flange bearing housing with axial ball bearings - flange bearings with needle bearings and axial bearing - flange bearing

      Application example – (1) bearing housing with needle bearing and BGCT axial ball bearing, (F) load direction


      Maintenance

      For bearing housings, the installed bearing can be replaced after the service life has been reached. If the bearings are pressed into the bearing housing, it is recommended to replace the bearing together with the housing. The bearing number installed in the MISUMI bearing housing is discernible from the article number of the bearing unit.
      Further information about the various application of bearings can be found under the tab More Information.
      Note : After determining the bearing number, you can enter it in the search window to determine the load values and specifications of the bearing for the calculation.
       

      Application examples

      Application example - flange bearing housing with angular ball bearing - flange bearing with three ball bearings - fixed bearing - bearing with housing

      Application example of a flange bearing housing
      (1) Collar, (2) Bearing lock nut, (3) Deep groove ball bearing, (4) Housing, (5) Rotary shaft, (6) O-ring, (7) Angular ball bearing, (8) Collar
       


      Application example - pedestal bearing housing with conveyor belt - pedestal bearing for conveyor belt - bearing with housing

      Application example of a pedestal bearing with conveyor belt
      (1) Pedestal bearing, (2) Rotary shaft, (3) Conveyor belt, (4) Idler for flat belts, (5) Collar
       



      Application example - bearing housing front mount - bearing housing straight - bearing housing with cross hole - bearing with housing

      Application example of a bearing housing
      (1) Bearing housing, (2) Metal washer, (3) Screw, (4) Mounting plate, (5) Nut



      Application example - Flange bearing housing with clamping ring - Flange bearing with adjusting ring - Flange bearing - Flange bearing with two ball bearings

      Application example of a flange bearing housing with clamping ring
      (1) Flange bearing, (2) Clamping ring

       

      Supplementary Article

       

      Rotary shafts

      Rotary axes - rotary shafts - assortment

       

      Drive shafts

      Drive shafts - motor shafts - assortment

       

      Bearing Lock Nuts

      Shaft nuts - groove nuts - assortment

       

      Washers / Collars (Metal)

      Metal discs - sleeves - assortment

       

      Screws

      Screws - threaded screws - shoulder screws - collar screws - countersunk screws - hexagon screws - cylinder head screws - assortment

       

      Industrial Applications

       

      3D printer industry
      Automotive industry
      Pharmaceutical industry
      Packaging industry

       

      Lista numerów części

      Liczba pozycji

      Bearing I.D. d

      (mm)

      Bearing Material

      Holder Material

      Flange Shape

      Thickness T

      (mm)

      Holder Surface Treatment

      Bearing Part Number

      Seals

      Flange Outer Dia. H

      (Ø)

      RoHS?Minimalna wielkość zamówienia
      10
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      13
      Clear Anodize
      6000
      DD (Contact Rubber Seal)
      50
      10
      1 szt.
      10
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      13
      Clear Anodize
      6000
      VV (Non-Contact Rubber Seal)
      50
      10
      1 szt.
      10
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      13
      Clear Anodize
      6000
      ZZ (Double Shield)
      50
      10
      1 szt.
      12
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      13
      Clear Anodize
      6001
      DD (Contact Rubber Seal)
      52
      10
      1 szt.
      12
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      13
      Clear Anodize
      6001
      VV (Non-Contact Rubber Seal)
      52
      10
      1 szt.
      12
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      13
      Clear Anodize
      6001
      ZZ (Double Shield)
      52
      10
      1 szt.
      15
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      14
      Clear Anodize
      6002
      DD (Contact Rubber Seal)
      60
      10
      1 szt.
      15
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      14
      Clear Anodize
      6002
      VV (Non-Contact Rubber Seal)
      60
      10
      1 szt.
      15
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      14
      Clear Anodize
      6002
      ZZ (Double Shield)
      60
      10
      1 szt.
      17
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      16
      Clear Anodize
      6003
      DD (Contact Rubber Seal)
      66
      10
      1 szt.
      17
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      16
      Clear Anodize
      6003
      VV (Non-Contact Rubber Seal)
      66
      10
      1 szt.
      17
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      16
      Clear Anodize
      6003
      ZZ (Double Shield)
      66
      10
      1 szt.
      20
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      18
      Clear Anodize
      6004
      DD (Contact Rubber Seal)
      77
      10
      1 szt.
      20
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      18
      Clear Anodize
      6004
      VV (Non-Contact Rubber Seal)
      77
      10
      1 szt.
      20
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      18
      Clear Anodize
      6004
      ZZ (Double Shield)
      77
      10
      1 szt.
      5
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      10
      Clear Anodize
      605
      DD (Contact Rubber Seal)
      36
      10
      1 szt.
      5
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      10
      Clear Anodize
      605
      ZZ (Double Shield)
      36
      10
      1 szt.
      6
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      11
      Clear Anodize
      606
      DD (Contact Rubber Seal)
      39
      10
      1 szt.
      6
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      11
      Clear Anodize
      606
      ZZ (Double Shield)
      39
      10
      1 szt.
      8
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      12
      Clear Anodize
      608
      DD (Contact Rubber Seal)
      45
      10
      1 szt.
      8
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      12
      Clear Anodize
      608
      VV (Non-Contact Rubber Seal)
      45
      10
      1 szt.
      8
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      12
      Clear Anodize
      608
      ZZ (Double Shield)
      45
      10
      1 szt.
      10
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      14
      Clear Anodize
      6200
      DD (Contact Rubber Seal)
      54
      10
      1 szt.
      10
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      14
      Clear Anodize
      6200
      VV (Non-Contact Rubber Seal)
      54
      10
      1 szt.
      10
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      14
      Clear Anodize
      6200
      ZZ (Double Shield)
      54
      10
      1 szt.
      12
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      15
      Clear Anodize
      6201
      DD (Contact Rubber Seal)
      56
      10
      1 szt.
      12
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      15
      Clear Anodize
      6201
      VV (Non-Contact Rubber Seal)
      56
      10
      1 szt.
      12
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      15
      Clear Anodize
      6201
      ZZ (Double Shield)
      56
      10
      1 szt.
      15
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      17
      Clear Anodize
      6202
      DD (Contact Rubber Seal)
      64
      10
      1 szt.
      15
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      17
      Clear Anodize
      6202
      VV (Non-Contact Rubber Seal)
      64
      10
      1 szt.
      15
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      17
      Clear Anodize
      6202
      ZZ (Double Shield)
      64
      10
      1 szt.
      17
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      18
      Clear Anodize
      6203
      DD (Contact Rubber Seal)
      72
      10
      1 szt.
      17
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      18
      Clear Anodize
      6203
      VV (Non-Contact Rubber Seal)
      72
      10
      1 szt.
      17
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      18
      Clear Anodize
      6203
      ZZ (Double Shield)
      72
      10
      1 szt.
      20
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      20
      Clear Anodize
      6204
      DD (Contact Rubber Seal)
      81
      10
      1 szt.
      20
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      20
      Clear Anodize
      6204
      VV (Non-Contact Rubber Seal)
      81
      10
      1 szt.
      20
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      20
      Clear Anodize
      6204
      ZZ (Double Shield)
      81
      10
      1 szt.
      3
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      9
      Clear Anodize
      623
      DD (Contact Rubber Seal)
      33
      10
      1 szt.
      3
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      9
      Clear Anodize
      623
      ZZ (Double Shield)
      33
      10
      1 szt.
      4
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      10
      Clear Anodize
      624
      DD (Contact Rubber Seal)
      35
      10
      1 szt.
      4
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      10
      Clear Anodize
      624
      ZZ (Double Shield)
      35
      10
      1 szt.
      5
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      10
      Clear Anodize
      625
      DD (Contact Rubber Seal)
      38
      10
      1 szt.
      5
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      10
      Clear Anodize
      625
      VV (Non-Contact Rubber Seal)
      38
      10
      1 szt.
      5
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      10
      Clear Anodize
      625
      ZZ (Double Shield)
      38
      10
      1 szt.
      6
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      11
      Clear Anodize
      626
      DD (Contact Rubber Seal)
      41
      10
      1 szt.
      6
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      11
      Clear Anodize
      626
      VV (Non-Contact Rubber Seal)
      41
      10
      1 szt.
      6
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      11
      Clear Anodize
      626
      ZZ (Double Shield)
      41
      10
      1 szt.
      8
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      13
      Clear Anodize
      628
      DD (Contact Rubber Seal)
      47
      10
      1 szt.
      8
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      13
      Clear Anodize
      628
      VV (Non-Contact Rubber Seal)
      47
      10
      1 szt.
      8
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      13
      Clear Anodize
      628
      ZZ (Double Shield)
      47
      10
      1 szt.
      10
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      10
      Clear Anodize
      6800
      DD (Contact Rubber Seal)
      41
      10
      1 szt.
      10
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      10
      Clear Anodize
      6800
      VV (Non-Contact Rubber Seal)
      41
      10
      1 szt.
      10
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      10
      Clear Anodize
      6800
      ZZ (Double Shield)
      41
      10
      1 szt.
      12
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      10
      Clear Anodize
      6801
      DD (Contact Rubber Seal)
      44
      10
      1 szt.
      12
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      10
      Clear Anodize
      6801
      VV (Non-Contact Rubber Seal)
      44
      10
      1 szt.
      12
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      10
      Clear Anodize
      6801
      ZZ (Double Shield)
      44
      10
      1 szt.
      15
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      10
      Clear Anodize
      6802
      DD (Contact Rubber Seal)
      47
      10
      1 szt.
      15
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      10
      Clear Anodize
      6802
      VV (Non-Contact Rubber Seal)
      47
      10
      1 szt.
      15
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      10
      Clear Anodize
      6802
      ZZ (Double Shield)
      47
      10
      1 szt.
      20
      [Steel] Steel
      [EN AW-2017 Equiv.] Aluminum Alloy 2000 series
      Compact Type
      12
      Clear Anodize
      6804
      DD (Contact Rubber Seal)
      60
      10
      1 szt.
      Cena jednostkowa (bez VAT)(Cena jednostkowa z podatkiem)
      Standardowa data wysyłki
      33.14 €
      ( 39.44 € )
      10 dni robocze
      33.14 €
      ( 39.44 € )
      10 dni robocze
      30.23 €
      ( 35.97 € )
      10 dni robocze
      35.35 €
      ( 42.07 € )
      10 dni robocze
      35.35 €
      ( 42.07 € )
      10 dni robocze
      32.28 €
      ( 38.41 € )
      10 dni robocze
      37.23 €
      ( 44.30 € )
      10 dni robocze
      37.23 €
      ( 44.30 € )
      10 dni robocze
      33.98 €
      ( 40.44 € )
      10 dni robocze
      40.99 €
      ( 48.78 € )
      10 dni robocze
      40.99 €
      ( 48.78 € )
      10 dni robocze
      37.40 €
      ( 44.51 € )
      10 dni robocze
      43.55 €
      ( 51.82 € )
      10 dni robocze
      43.55 €
      ( 51.82 € )
      10 dni robocze
      39.62 €
      ( 47.15 € )
      10 dni robocze
      27.34 €
      ( 32.53 € )
      10 dni robocze
      24.94 €
      ( 29.68 € )
      10 dni robocze
      28.87 €
      ( 34.36 € )
      10 dni robocze
      26.31 €
      ( 31.31 € )
      10 dni robocze
      30.41 €
      ( 36.19 € )
      10 dni robocze
      30.41 €
      ( 36.19 € )
      10 dni robocze
      27.68 €
      ( 32.94 € )
      10 dni robocze
      35.70 €
      ( 42.48 € )
      10 dni robocze
      35.70 €
      ( 42.48 € )
      10 dni robocze
      32.46 €
      ( 38.63 € )
      10 dni robocze
      36.20 €
      ( 43.08 € )
      10 dni robocze
      36.20 €
      ( 43.08 € )
      10 dni robocze
      32.96 €
      ( 39.22 € )
      10 dni robocze
      38.94 €
      ( 46.34 € )
      10 dni robocze
      38.94 €
      ( 46.34 € )
      10 dni robocze
      35.54 €
      ( 42.29 € )
      10 dni robocze
      42.01 €
      ( 49.99 € )
      10 dni robocze
      42.01 €
      ( 49.99 € )
      10 dni robocze
      38.26 €
      ( 45.53 € )
      10 dni robocze
      45.09 €
      ( 53.66 € )
      10 dni robocze
      45.09 €
      ( 53.66 € )
      10 dni robocze
      40.99 €
      ( 48.78 € )
      10 dni robocze
      26.81 €
      ( 31.90 € )
      10 dni robocze
      24.43 €
      ( 29.07 € )
      10 dni robocze
      26.99 €
      ( 32.12 € )
      10 dni robocze
      24.60 €
      ( 29.27 € )
      10 dni robocze
      28.70 €
      ( 34.15 € )
      10 dni robocze
      28.70 €
      ( 34.15 € )
      10 dni robocze
      26.13 €
      ( 31.09 € )
      10 dni robocze
      30.07 €
      ( 35.78 € )
      10 dni robocze
      30.07 €
      ( 35.78 € )
      10 dni robocze
      27.34 €
      ( 32.53 € )
      10 dni robocze
      32.80 €
      ( 39.03 € )
      10 dni robocze
      32.80 €
      ( 39.03 € )
      10 dni robocze
      29.89 €
      ( 35.57 € )
      10 dni robocze
      36.55 €
      ( 43.49 € )
      10 dni robocze
      36.55 €
      ( 43.49 € )
      10 dni robocze
      33.31 €
      ( 39.64 € )
      10 dni robocze
      43.72 €
      ( 52.03 € )
      10 dni robocze
      43.72 €
      ( 52.03 € )
      10 dni robocze
      39.79 €
      ( 47.35 € )
      10 dni robocze
      45.25 €
      ( 53.85 € )
      10 dni robocze
      45.25 €
      ( 53.85 € )
      10 dni robocze
      41.16 €
      ( 48.98 € )
      10 dni robocze
      53.63 €
      ( 63.82 € )
      10 dni robocze

      Szczegółowe informacje

      Podstawowe informacje

      Conventional countersunk holes are used, making it suitable for space-saving use.

      Kontury i specyfikacja

      Back to the Category Bearings with Housing

      Technical Drawing - Bearings with Housing

      Direct Mount/Standard/Retained:Related Image
      Specification Tables - Bearings with Housing

       

      Part NumberdDH7 BHWT1dhP.C.D.KAFM (Coarse)(d2)d1H1
      TypeBearing No.SealTolerance
      (Round)
      BGRAB
      BGRA
      BARA
      SBARA
      SBGRA


      (Square)
      BGSAB
      BGSA
      BASA
      SBASA
      SBGSA


      (Compact)
      BGCAB
      BGCA
      BACA
      SBACA
      SBGCA
      623ZZ
      Double Shielded

      *1
      *2VV
      Non-Contact Sealed
      Rubber Seal

      *2DD
      Contact Sealed
      Rubber Seal
      310+ 0.015
      0
      43316927242724-M4
      (3.3)
      6.53.4
      624413+ 0.018
      0
      53518109262826
      605514536201010263026M5
      (4.3)
      84.4
      62516538221012283128
      606617639231113293229
      62619+ 0.021
      0
      641251115313431
      698819641251115313431
      60822745291218353635
      62824847321320373737
      68001019541251015313431
      690022645291119353635
      600026850341322403940
      620030954381424444244
      68011221544291017343534
      690124648311121383838
      600128852361324424042
      620132+ 0.025
      0
      1056401526464346
      68021524+ 0.021
      0
      547321020373737
      690228757371225454545M6
      (5.2)
      9.55.4
      600232+ 0.025
      0
      960401428484648
      6202351164441729524952
      69031730+ 0.021
      0
      760381227484648
      600335+ 0.025
      0
      1066441631545054
      6203401272501834605460
      6804203276040122848463829
      69043796947153456545124M8
      (6.8)
      116.5
      600442127754183664595632
      620447148158204068625934
      6805253776947133456545124
      69054297754153664595632
      600547128858184172676336M10
      (8.5)
      148.6
      620552+ 0.030
      0
      159464224578726839
      68063042+ 0.025
      0
      77754133664595632M8 (6.8)116.5
      69064798858154172676336M10
      (8.5)
      148.6
      600655+ 0.030
      0
      139666204880737040
      6206621610474235588797744
      600735142175
      620772171268826364105959251M12 (10.5)17.511
      6008406815114822326096868054M10 (8.5)148.6
      6208801813496273741131029856M12
      (10.5)
      17.511
      6010ZZ
      Double Shielded
      501625-
      621090+ 0.035
      0
      2014711031483126-10472
      Check for available sizes in the price list.
      *1 No. 623, 624, 605 and 606 are not available for VV (Non-contact Sealed).
      *2 Bearings with Rubber Seals are all made of steel.
       
      Alterations - Bearings with Housing


      Direct Mount/Standard/Retained:Related Image