Motor shafts / two-sided offset / machining selectable

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Drive Shafts/Both Ends Stepped Type:Related Image

Type	D, P Tolerance	Concentricity	Perpendicularity	Material	Hardness	Surface Treatment
KZCE	h7	Ø0.05	0.05	EN 1.1191 Equiv.	-	Black Oxide
KZCN	h6	Ø0.01	0.01	EN 1.1191 Equiv.	-	-
KZCC						Black Oxide
KZCP						Electroless Nickel Plating
KZCF				EN 1.1191 Equiv.	Induction Hardened	-
KZCF				EN 1.1191 Equiv.	Surface Hardness 50HRC~	-

Specifications

Part Number	-	L	-	P	-	LA	-	LB
KZCF50	-	450	-	P45	-	LA80	-	LB50

Part Number		0.5mm Increment	Selection	0.5mm Increment		*Ds
Type	D	L	P	LA	LB
KZCE (D10~30) KZCN KZCC KZCP KZCF	10	50.0~300.0	6	4.0~40.0	4.0~40.0	8
			8			9.5
	12		8			10
			10	5.0~50.0	5.0~50.0	11.5
	15	100.0~400.0	10			13
			12	5.0~75.0		14
	20		15			18
			17	5.0~100.0		19
	25	100.0~500.0	17			21
			20	10.0~100.0	10.0~60.0	24
	30		20			27
			25	10.0~125.0		29
	*35		25			31
			30	15.0~150.0	15.0~70.0	34
	*40	200.0~500.0	30			37
			35			39
	*50		40	20.0~150.0	20.0~70.0	48
			45			49

* marked sizes are not available for KZCE.

Alterations

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
KZCC10-[50-300/0.5]-P[6,8]-LA[4-40/0.5]-LB[4-40/0.5]
KZCC12-[50-300/0.5]-P[8,10]-LA[4-50/0.5]-LB[4-50/0.5]
KZCC15-[100-400/0.5]-P[10,12]-LA[5-75/0.5]-LB[5-50/0.5]
KZCC20-[100-400/0.5]-P[15,17]-LA[5-100/0.5]-LB[5-50/0.5]
KZCC25-[100-500/0.5]-P[17,20]-LA[5-100/0.5]-LB[5-60/0.5]
KZCC30-[100-500/0.5]-P[20,25]-LA[10-125/0.5]-LB[10-60/0.5]
KZCC35-[100-500/0.5]-P[25,30]-LA[10-150/0.5]-LB[10-70/0.5]
KZCC40-[200-500/0.5]-P[30,35]-LA[15-150/0.5]-LB[15-70/0.5]
KZCC50-[200-500/0.5]-P[40,45]-LA[20-150/0.5]-LB[20-70/0.5]
KZCE10-[50-300/0.5]-P[6,8]-LA[4-40/0.5]-LB[4-40/0.5]
KZCE12-[50-300/0.5]-P[8,10]-LA[4-50/0.5]-LB[4-50/0.5]
KZCE15-[100-400/0.5]-P[10,12]-LA[5-75/0.5]-LB[5-50/0.5]
KZCE20-[100-400/0.5]-P[15,17]-LA[5-100/0.5]-LB[5-50/0.5]
KZCE25-[100-500/0.5]-P[17,20]-LA[5-100/0.5]-LB[5-60/0.5]
KZCE30-[100-500/0.5]-P[20,25]-LA[10-125/0.5]-LB[10-60/0.5]
KZCF10-[50-300/0.5]-P[6,8]-LA[4-40/0.5]-LB[4-40/0.5]
KZCF12-[50-300/0.5]-P[8,10]-LA[4-50/0.5]-LB[4-50/0.5]
KZCF15-[100-400/0.5]-P[10,12]-LA[5-75/0.5]-LB[5-50/0.5]
KZCF20-[100-400/0.5]-P[15,17]-LA[5-100/0.5]-LB[5-50/0.5]
KZCF25-[100-500/0.5]-P[17,20]-LA[5-100/0.5]-LB[5-60/0.5]
KZCF30-[100-500/0.5]-P[20,25]-LA[10-125/0.5]-LB[10-60/0.5]
KZCF35-[100-500/0.5]-P[25,30]-LA[10-150/0.5]-LB[10-70/0.5]
KZCF40-[200-500/0.5]-P[30,35]-LA[15-150/0.5]-LB[15-70/0.5]
KZCF50-[200-500/0.5]-P[40,45]-LA[20-150/0.5]-LB[20-70/0.5]
KZCN10-[50-300/0.5]-P[6,8]-LA[4-40/0.5]-LB[4-40/0.5]
KZCN12-[50-300/0.5]-P[8,10]-LA[4-50/0.5]-LB[4-50/0.5]
KZCN15-[100-400/0.5]-P[10,12]-LA[5-75/0.5]-LB[5-50/0.5]
KZCN20-[100-400/0.5]-P[15,17]-LA[5-100/0.5]-LB[5-50/0.5]
KZCN25-[100-500/0.5]-P[17,20]-LA[5-100/0.5]-LB[5-60/0.5]
KZCN30-[100-500/0.5]-P[20,25]-LA[10-125/0.5]-LB[10-60/0.5]
KZCN35-[100-500/0.5]-P[25,30]-LA[10-150/0.5]-LB[10-70/0.5]
KZCN40-[200-500/0.5]-P[30,35]-LA[15-150/0.5]-LB[15-70/0.5]
KZCN50-[200-500/0.5]-P[40,45]-LA[20-150/0.5]-LB[20-70/0.5]
KZCP10-[50-300/0.5]-P[6,8]-LA[4-40/0.5]-LB[4-40/0.5]
KZCP12-[50-300/0.5]-P[8,10]-LA[4-50/0.5]-LB[4-50/0.5]
KZCP15-[100-400/0.5]-P[10,12]-LA[5-75/0.5]-LB[5-50/0.5]
KZCP20-[100-400/0.5]-P[15,17]-LA[5-100/0.5]-LB[5-50/0.5]
KZCP25-[100-500/0.5]-P[17,20]-LA[5-100/0.5]-LB[5-60/0.5]
KZCP30-[100-500/0.5]-P[20,25]-LA[10-125/0.5]-LB[10-60/0.5]
KZCP35-[100-500/0.5]-P[25,30]-LA[10-150/0.5]-LB[10-70/0.5]
KZCP40-[200-500/0.5]-P[30,35]-LA[15-150/0.5]-LB[15-70/0.5]
KZCP50-[200-500/0.5]-P[40,45]-LA[20-150/0.5]-LB[20-70/0.5]

Minimum order quantity	Standard Shipping Days ?	RoHS	Hardness	Surface Treatment	Shaft Dia. D (mm)	Shaft Tolerance	L (mm)	LA (mm)	LB (mm)	P (mm)
1	16 Days	10	No Hardened	[Surface Treatment Provided] Black Oxide	10	h6	50 ～ 300	4 ～ 40	4 ～ 40	6 ～ 8
1	16 Days	10	No Hardened	[Surface Treatment Provided] Black Oxide	12	h6	50 ～ 300	4 ～ 50	4 ～ 50	8 ～ 10
1	16 Days	10	No Hardened	[Surface Treatment Provided] Black Oxide	15	h6	100 ～ 400	5 ～ 75	5 ～ 50	10 ～ 12
1	16 Days	10	No Hardened	[Surface Treatment Provided] Black Oxide	20	h6	100 ～ 400	5 ～ 100	5 ～ 50	15 ～ 17
1	16 Days	10	No Hardened	[Surface Treatment Provided] Black Oxide	25	h6	100 ～ 500	5 ～ 100	5 ～ 60	17 ～ 20
1	16 Days	10	No Hardened	[Surface Treatment Provided] Black Oxide	30	h6	100 ～ 500	10 ～ 125	10 ～ 60	20 ～ 25
1	16 Days	10	No Hardened	[Surface Treatment Provided] Black Oxide	35	h6	100 ～ 500	10 ～ 150	10 ～ 70	25 ～ 30
1	16 Days	10	No Hardened	[Surface Treatment Provided] Black Oxide	40	h6	200 ～ 500	15 ～ 150	15 ～ 70	30 ～ 35
1	16 Days	10	No Hardened	[Surface Treatment Provided] Black Oxide	50	h6	200 ～ 500	20 ～ 150	20 ～ 70	40 ～ 45
1	9 Days	10	No Hardened	[Surface Treatment Provided] Black Oxide	10	h7	50 ～ 300	4 ～ 40	4 ～ 40	6 ～ 8
1	9 Days	10	No Hardened	[Surface Treatment Provided] Black Oxide	12	h7	50 ～ 300	4 ～ 50	4 ～ 50	8 ～ 10
1	9 Days	10	No Hardened	[Surface Treatment Provided] Black Oxide	15	h7	100 ～ 400	5 ～ 75	5 ～ 50	10 ～ 12
1	9 Days	10	No Hardened	[Surface Treatment Provided] Black Oxide	20	h7	100 ～ 400	5 ～ 100	5 ～ 50	15 ～ 17
1	9 Days	10	No Hardened	[Surface Treatment Provided] Black Oxide	25	h7	100 ～ 500	5 ～ 100	5 ～ 60	17 ～ 20
1	9 Days	10	No Hardened	[Surface Treatment Provided] Black Oxide	30	h7	100 ～ 500	10 ～ 125	10 ～ 60	20 ～ 25
1	18 Days	10	-	No Surface Treatment	10	h6	50 ～ 300	4 ～ 40	4 ～ 40	6 ～ 8
1	18 Days	10	-	No Surface Treatment	12	h6	50 ～ 300	4 ～ 50	4 ～ 50	8 ～ 10
1	18 Days	10	-	No Surface Treatment	15	h6	100 ～ 400	5 ～ 75	5 ～ 50	10 ～ 12
1	18 Days	10	-	No Surface Treatment	20	h6	100 ～ 400	5 ～ 100	5 ～ 50	15 ～ 17
1	18 Days	10	-	No Surface Treatment	25	h6	100 ～ 500	5 ～ 100	5 ～ 60	17 ～ 20
1	18 Days	10	-	No Surface Treatment	30	h6	100 ～ 500	10 ～ 125	10 ～ 60	20 ～ 25
1	18 Days	10	-	No Surface Treatment	35	h6	100 ～ 500	10 ～ 150	10 ～ 70	25 ～ 30
1	18 Days	10	-	No Surface Treatment	40	h6	200 ～ 500	15 ～ 150	15 ～ 70	30 ～ 35
1	18 Days	10	-	No Surface Treatment	50	h6	200 ～ 500	20 ～ 150	20 ～ 70	40 ～ 45
1	16 Days	10	No Hardened	No Surface Treatment	10	h6	50 ～ 300	4 ～ 40	4 ～ 40	6 ～ 8
1	16 Days	10	No Hardened	No Surface Treatment	12	h6	50 ～ 300	4 ～ 50	4 ～ 50	8 ～ 10
1	16 Days	10	No Hardened	No Surface Treatment	15	h6	100 ～ 400	5 ～ 75	5 ～ 50	10 ～ 12
1	16 Days	10	No Hardened	No Surface Treatment	20	h6	100 ～ 400	5 ～ 100	5 ～ 50	15 ～ 17
1	16 Days	10	No Hardened	No Surface Treatment	25	h6	100 ～ 500	5 ～ 100	5 ～ 60	17 ～ 20
1	16 Days	10	No Hardened	No Surface Treatment	30	h6	100 ～ 500	10 ～ 125	10 ～ 60	20 ～ 25
1	16 Days	10	No Hardened	No Surface Treatment	35	h6	100 ～ 500	10 ～ 150	10 ～ 70	25 ～ 30
1	16 Days	10	No Hardened	No Surface Treatment	40	h6	200 ～ 500	15 ～ 150	15 ～ 70	30 ～ 35
1	16 Days	10	No Hardened	No Surface Treatment	50	h6	200 ～ 500	20 ～ 150	20 ～ 70	40 ～ 45
1	18 Days	10	No Hardened	[Surface Treatment Provided] Electroless Nickel Plating	10	h6	50 ～ 300	4 ～ 40	4 ～ 40	6 ～ 8
1	18 Days	10	No Hardened	[Surface Treatment Provided] Electroless Nickel Plating	12	h6	50 ～ 300	4 ～ 50	4 ～ 50	8 ～ 10
1	18 Days	10	No Hardened	[Surface Treatment Provided] Electroless Nickel Plating	15	h6	100 ～ 400	5 ～ 75	5 ～ 50	10 ～ 12
1	18 Days	10	No Hardened	[Surface Treatment Provided] Electroless Nickel Plating	20	h6	100 ～ 400	5 ～ 100	5 ～ 50	15 ～ 17
1	18 Days	10	No Hardened	[Surface Treatment Provided] Electroless Nickel Plating	25	h6	100 ～ 500	5 ～ 100	5 ～ 60	17 ～ 20
1	18 Days	10	No Hardened	[Surface Treatment Provided] Electroless Nickel Plating	30	h6	100 ～ 500	10 ～ 125	10 ～ 60	20 ～ 25
1	18 Days	10	No Hardened	[Surface Treatment Provided] Electroless Nickel Plating	35	h6	100 ～ 500	10 ～ 150	10 ～ 70	25 ～ 30
1	18 Days	10	No Hardened	[Surface Treatment Provided] Electroless Nickel Plating	40	h6	200 ～ 500	15 ～ 150	15 ～ 70	30 ～ 35
1	18 Days	10	No Hardened	[Surface Treatment Provided] Electroless Nickel Plating	50	h6	200 ～ 500	20 ～ 150	20 ～ 70	40 ～ 45

More Information

Products homepage

Basic information

Basic Shape	Both Ends Stepped	Material	EN 1.1191 Equiv.

Configure

42Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Hardness
- No Hardened
Clear
Surface Treatment
- No Surface Treatment
- Surface Treatment Provided
  - Black Oxide
  - Electroless Nickel Plating
Clear
Shaft Dia. D(mm)
10

12

15

20

25

30

35

40

50
Clear
Shaft Tolerance
- h6
- h7
Clear
L(mm)
[50-500/0.5mm Unit(s)]
Clear
LA(mm)
[4-150/0.5mm Unit(s)]
Clear
LB(mm)
[4-70/0.5mm Unit(s)]
Clear
P(mm)
6

8

10

12

15

17

20

25

30

35

40

45
Clear
Type
- KZCC
- KZCE
- KZCF
- KZCN
- KZCP
Clear
Filter by CAD data type
- 2D
- 3D
Clear