STEP EJECTOR SLEEVES -DIN ISO 8405 / 1.2344 equivalent+Nitrided / ◎0.08 / Dimensions configurable- (Part Numbers - CAD Download)
- DIN Standard
- New Product
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Specifications
Drawing / Product specification
D-ESNF
| [ ! ]Nitriding may extend to the head as it is applied after dimension V, D and P machining. | |
| [ ! ]When the diameter (D) portion of the stepped center pin is inserted into the relief hole (C) of D-ESNF, D-ESDF type, make sure | relief hole (C) ≧ pin diameter (D)＋1.0 |
| Part No. | [ M ] | [ H ] | [ T ]P | [ T ]V | Applicable center pin shaft diameter tolerance | |
| D-ESNF | 1.2344 equivalent+Nitrided | Surface: 900HV Base Material: 40±3HRC | g6 | H7 | -0.01 -0.02 | *Please note that the ejector sleeve with a V dimension tolerance of H7 has a long precision fitting portion S and is not suitable for use with a center pin with a shaft diameter tolerance of 0-0.005. |
| P≦6 | 6.5≦P≦10 | 12≦P≦16 | P＝20 |
| －0.004 －0.012 | －0.005 －0.014 | －0.006 －0.017 | －0.007 －0.020 |
| V≦3.0 | 3.1≦V≦6.0 | 6.1≦V≦10.0 | V≧10.1 |
| +0.010 0 | +0.012 0 | +0.015 0 | +0.018 0 |
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number | Minimum order quantity | Volume Discount | D (Shaft diameter) (mm) | P (Tip diameter) (mm) | V (Hole diameter) (mm) | N (mm) | L (L Dimension) (mm) | C(Recess Diameter) (mm) | S(V Hole Diameter Length) (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 15 Days | 5 | 3.5 ～ 4.95 | 2 ～ 3 | 16 ～ 300 | 50 ～ 300 | 2.5 ～ 3.5 | 20 ～ 100 | ||
| 1 | 15 Days | 5.5 | 3.5 ～ 5.45 | 2 ～ 3.5 | 16 ～ 300 | 50 ～ 300 | 2.5 ～ 4 | 20 ～ 100 | ||
| 1 | 15 Days | 6 | 4 ～ 5.95 | 2 ～ 4 | 16 ～ 500 | 50 ～ 500 | 2.5 ～ 4.5 | 20 ～ 100 | ||
| 1 | 15 Days | 6.5 | 4 ～ 6.45 | 2 ～ 4.5 | 16 ～ 500 | 50 ～ 500 | 2.5 ～ 5 | 20 ～ 100 | ||
| 1 | 15 Days | 7 | 4 ～ 6.95 | 2 ～ 4.5 | 16 ～ 500 | 50 ～ 500 | 2.5 ～ 5 | 20 ～ 100 | ||
| 1 | 15 Days | 7.5 | 4 ～ 7.45 | 2 ～ 5 | 16 ～ 500 | 50 ～ 500 | 2.5 ～ 5.5 | 20 ～ 100 | ||
| 1 | 15 Days | 8 | 5 ～ 7.95 | 2.5 ～ 5.5 | 26 ～ 500 | 70 ～ 500 | 3 ～ 6 | 20 ～ 100 | ||
| 1 | 15 Days | 9 | 6 ～ 8.95 | 3 ～ 6.5 | 24 ～ 490 | 70 ～ 500 | 3.5 ～ 7 | 20 ～ 100 | ||
| 1 | 15 Days | 10 | 6 ～ 9.95 | 3.5 ～ 7.5 | 26 ～ 500 | 70 ～ 500 | 4 ～ 8 | 20 ～ 100 | ||
| 1 | 18 Days | 12 | 7.5 ～ 11.95 | 4 ～ 8.5 | 30 ～ 600 | 70 ～ 500 | 4.5 ～ 9 | 20 ～ 100 | ||
| 1 | 18 Days | 12 | 7.5 ～ 11.95 | 4 ～ 8.5 | 30 ～ 600 | 500.1 ～ 800 | 4.5 ～ 9 | 20 ～ 100 | ||
| 1 | 18 Days | 15 | 10 ～ 14.95 | 5 ～ 10.5 | 33 ～ 600 | 70 ～ 500 | 5.5 ～ 11 | 20 ～ 100 | ||
| 1 | 18 Days | 15 | 10 ～ 14.95 | 5 ～ 10.5 | 33 ～ 600 | 500.1 ～ 800 | 5.5 ～ 11 | 20 ～ 100 | ||
| 1 | 18 Days | 16 | 12 ～ 15.95 | 5 ～ 11.5 | 34 ～ 590 | 100 ～ 500 | 5.5 ～ 12 | 20 ～ 100 | ||
| 1 | 18 Days | 16 | 12 ～ 15.95 | 5 ～ 11.5 | 34 ～ 590 | 500.1 ～ 800 | 5.5 ～ 12 | 20 ～ 100 | ||
| 1 | 18 Days | 20 | 14.5 ～ 19.95 | 7 ～ 16 | 34 ～ 590 | 100 ～ 500 | 7.5 ～ 17 | 20 ～ 100 | ||
| 1 | 18 Days | 20 | 14.5 ～ 19.95 | 7 ～ 16 | 34 ～ 590 | 500.1 ～ 800 | 7.5 ～ 17 | 20 ～ 100 |
Loading...
Specification table
| H | T | Part No. | L | V 0.1mm increments | [ ! ]P 0.01mm increments | C 0.1mm increments | Cmax. | N 1mm increments | S 5mm increments | ||||||||||||
| Type | 0.01mm increments | 0.1mm increments | |||||||||||||||||||
| 10 | 3 | D-ESNF (1.2344 equivalent) ＋ Nitrided | 5 | 50.00~300.00 | - | 2.0~3.0 | 3.50~4.95 | C≧V+0.5 and C≦P-1.0 ([ ! ]When L＞300 0.5mm increments) | 3.5 | N≧L3 | |||||||||||
| 5.5 | 2.0~3.5 | 3.50~5.45 | 4.0 | 20～100 | |||||||||||||||||
| 12 | 5 | 6 | 50.00~500.00 | 2.0~4.0 | 4.00~5.95 | 4.5 | L | (L-S) min. | |||||||||||||
| 6.5 | 2.0~4.5 | 4.00~6.45 | 5.0 | 50.00~60.00 | 20 | ||||||||||||||||
| 7 | 4.00~6.95 | 5.0 | 60.01~ | 30 | |||||||||||||||||
| 7.5 | 2.0~5.0 | 4.00~7.45 | 5.5 | ||||||||||||||||||
| 14 | 8 | 70.00~500.00 | 2.5~5.5 | 5.00~7.95 | 6.0 | 20～100 (L-S)≧50 | |||||||||||||||
| 9 | 3.0~6.5 | 6.00~8.95 | 7.0 | ( When L＞600 | |||||||||||||||||
| 16 | 10 | 3.5~7.5 | 6.00~9.95 | C≧V+0.5 and C≦P-1.5 ([ ! ]When L＞300 0.5mm increments) | 8.0 | L3≦N≦23L ) | |||||||||||||||
| 18 | 7 | 12 | 70.00~500.00 | 500.1～800.0 | 4.0~8.5 | 7.50~11.95 | 9.0 | ||||||||||||||
| 22 | 15 | 5.0~10.5 | 10.00~14.95 | 11.0 | |||||||||||||||||
| 16 | 100.00~500.00 | 5.0~11.5 | 12.00~15.95 | 12.0 | |||||||||||||||||
| 26 | 8 | 20 | 7.0~16.0 | 14.50~19.95 | 17.0 | ||||||||||||||||
| [ ! ]Lower limit of P and V | |||||||||||||||||||||
| L | D | 5・5.5 | 6~7 | 7.5・8 | 9~20 | ||||||||||||||||
| L≦300 | P≧V+1.5 | P≧V+1.5 | P≧V+1.5 | P≧V+2 | |||||||||||||||||
| L>300 and (L-N-10)≦S | - | P≧V+3 | P≧V+4 | P≧V+4.5 | |||||||||||||||||
| L>300 and (L-N-10)>S | - | P≧(V+3) and (P-C)/2≧0.75 | P≧(V+4) and (P-C)/2≧0.75 | P≧(V+4.5) and (P-C)/2≧0.75 | |||||||||||||||||
Order Example
| Part No. | - | L | - | V | - | P | - | C | - | N | - | S | ||
| D-ESNF 12 | - | 200.05 | - | V4.5 | P7.55 | - | C6.0 | - | N120 | - | S85 | |||
Alteration
| Part No. | - | L | - | V | - | P | - | C | - | N | - | S | - | (KC・WKC…etc.) | ||
| D-ESNF 6 | - | 150.00 | - | V3.0 | P5.50 | - | C4.0 | - | N80 | - | S85 | - | KC3.5 | |||
Basic information
| Brand | MISUMI | Product composition | Single sleeve | Surface treatment | Nitrided |
|---|---|---|---|---|---|
| Concentricity | ◎0.08 | Tapered or not | No | Technical Standard | DIN |
Configure
Basic Attributes
-
Type
- D-ESNF
-
D (Shaft diameter)(mm)
-
P (Tip diameter)(mm)
-
V (Hole diameter)(mm)
-
N(mm)
-
L (L Dimension)(mm)
-
C(Recess Diameter)(mm)
-
S(V Hole Diameter Length)(mm)
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 15 Days or Less
- 18 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metody płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.