Centring units / round / tool steel / conical / precision class selectable / outside, inside mounting / single, set
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number | Minimum order quantity | Volume Discount | RoHS | Components | Ext. dia./External tolerance | Angle of tapered shape (°) | Concentricity of straight/tapered section | Alterations | D (Outer diameter) (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Quote | 10 | Bushing | k6 | 1 | 0.01 or less | No | 13 | ||
| 1 | Quote | 10 | Bushing | k6 | 3 | 0.01 or less | No | 13 | ||
| 1 | Quote | 10 | Bushing | k6 | 5 | 0.01 or less | No | 13 | ||
| 1 | Quote | 10 | Bushing | k6 | 1 ～ 5 | 0.01 or less | Yes | 13 | ||
| 1 | Quote | 10 | Bushing | k6 | 1 | 0.01 or less | No | 16 | ||
| 1 | Quote | 10 | Bushing | k6 | 3 | 0.01 or less | No | 16 | ||
| 1 | Quote | 10 | Bushing | k6 | 5 | 0.01 or less | No | 16 | ||
| 1 | Quote | 10 | Bushing | k6 | 1 ～ 5 | 0.01 or less | Yes | 16 | ||
| 1 | Quote | 10 | Bushing | k6 | 1 | 0.01 or less | No | 20 | ||
| 1 | Quote | 10 | Bushing | k6 | 3 | 0.01 or less | No | 20 | ||
| 1 | Quote | 10 | Bushing | k6 | 5 | 0.01 or less | No | 20 | ||
| 1 | Quote | 10 | Bushing | k6 | 1 ～ 5 | 0.01 or less | Yes | 20 | ||
| 1 | Quote | 10 | Bushing | k6 | 1 | 0.01 or less | No | 25 | ||
| 1 | Quote | 10 | Bushing | k6 | 3 | 0.01 or less | No | 25 | ||
| 1 | Quote | 10 | Bushing | k6 | 5 | 0.01 or less | No | 25 | ||
| 1 | Quote | 10 | Bushing | k6 | 1 ～ 5 | 0.01 or less | Yes | 25 | ||
| 1 | Quote | 10 | Bushing | k6 | 1 | 0.01 or less | No | 30 | ||
| 1 | Quote | 10 | Bushing | k6 | 3 | 0.01 or less | No | 30 | ||
| 1 | Quote | 10 | Bushing | k6 | 5 | 0.01 or less | No | 30 | ||
| 1 | Quote | 10 | Bushing | k6 | 1 ～ 5 | 0.01 or less | Yes | 30 | ||
| 1 | Quote | 10 | Bushing | k6 | 1 | 0.01 or less | No | 32 | ||
| 1 | Quote | 10 | Bushing | k6 | 3 | 0.01 or less | No | 32 | ||
| 1 | Quote | 10 | Bushing | k6 | 5 | 0.01 or less | No | 32 | ||
| 1 | Quote | 10 | Bushing | k6 | 1 ～ 5 | 0.01 or less | Yes | 32 | ||
| 1 | Quote | 10 | Bushing | k6 | 1 | 0.01 or less | No | 35 | ||
| 1 | Quote | 10 | Bushing | k6 | 3 | 0.01 or less | No | 35 | ||
| 1 | Quote | 10 | Bushing | k6 | 5 | 0.01 or less | No | 35 | ||
| 1 | Quote | 10 | Bushing | k6 | 1 ～ 5 | 0.01 or less | Yes | 35 | ||
| 1 | Quote | 10 | Bushing | +0.005/0 | 1 | 0.005 or less | No | 13 | ||
| 1 | Quote | 10 | Bushing | +0.005/0 | 3 | 0.005 or less | No | 13 | ||
| 1 | Quote | 10 | Bushing | +0.005/0 | 5 | 0.005 or less | No | 13 | ||
| 1 | Quote | 10 | Bushing | +0.005/0 | 1 ～ 5 | 0.005 or less | Yes | 13 | ||
| 1 | Quote | 10 | Bushing | +0.005/0 | 1 | 0.005 or less | No | 16 | ||
| 1 | Quote | 10 | Bushing | +0.005/0 | 3 | 0.005 or less | No | 16 | ||
| 1 | Quote | 10 | Bushing | +0.005/0 | 5 | 0.005 or less | No | 16 | ||
| 1 | Quote | 10 | Bushing | +0.005/0 | 1 ～ 5 | 0.005 or less | Yes | 16 | ||
| 1 | Quote | 10 | Bushing | +0.005/0 | 1 | 0.005 or less | No | 20 | ||
| 1 | Quote | 10 | Bushing | +0.005/0 | 3 | 0.005 or less | No | 20 | ||
| 1 | Quote | 10 | Bushing | +0.005/0 | 5 | 0.005 or less | No | 20 | ||
| 1 | Quote | 10 | Bushing | +0.005/0 | 1 ～ 5 | 0.005 or less | Yes | 20 | ||
| 1 | Quote | 10 | Bushing | +0.005/0 | 1 | 0.005 or less | No | 25 | ||
| 1 | Quote | 10 | Bushing | +0.005/0 | 3 | 0.005 or less | No | 25 | ||
| 1 | Quote | 10 | Bushing | +0.005/0 | 5 | 0.005 or less | No | 25 | ||
| 1 | Quote | 10 | Bushing | +0.005/0 | 1 ～ 5 | 0.005 or less | Yes | 25 | ||
| 1 | Quote | 10 | Bushing | +0.005/0 | 1 | 0.005 or less | No | 30 | ||
| 1 | Quote | 10 | Bushing | +0.005/0 | 3 | 0.005 or less | No | 30 | ||
| 1 | Quote | 10 | Bushing | +0.005/0 | 5 | 0.005 or less | No | 30 | ||
| 1 | Quote | 10 | Bushing | +0.005/0 | 1 ～ 5 | 0.005 or less | Yes | 30 | ||
| 1 | Available | Quote | 10 | Bushing | +0.005/0 | 1 | 0.003 or less | Yes | 16 | |
| 1 | Available | Quote | 10 | Bushing | +0.005/0 | 3 | 0.003 or less | Yes | 16 | |
| 1 | Available | Quote | 10 | Bushing | +0.005/0 | 1 | 0.003 or less | Yes | 20 | |
| 1 | Available | Quote | 10 | Bushing | +0.005/0 | 3 | 0.003 or less | Yes | 20 | |
| 1 | Available | Quote | 10 | Bushing | +0.005/0 | 1 | 0.003 or less | Yes | 25 | |
| 1 | Available | Quote | 10 | Bushing | +0.005/0 | 3 | 0.003 or less | Yes | 25 | |
| 1 | Available | Quote | 10 | Bushing | +0.005/0 | 1 | 0.003 or less | Yes | 30 | |
| 1 | Available | Quote | 10 | Bushing | +0.005/0 | 3 | 0.003 or less | Yes | 30 | |
| 1 | Available | Quote | 10 | Bushing | +0.005/0 | 1 | 0.003 or less | Yes | 35 | |
| 1 | Available | Quote | 10 | Bushing | +0.005/0 | 3 | 0.003 or less | Yes | 35 |
Loading...
Basic information
| Shape type | Pin | Tapered or straight | Tapered shape | Mounting type | Bushing PL installation |
|---|
Configure
Basic Attributes
-
Ext. dia./External tolerance
- k6
- +0.005/0
-
Angle of tapered shape(°)
-
Concentricity of straight/tapered section
- Match mark
- 0.01 or less
- 0.003 or less
- 0.005 or less
-
Alterations
- No
- Yes
-
D (Outer diameter)(mm)
-
Type
- TPNC
- TPV
- TPVB
- TPVP
- VTPV
- VTPVB
- VTPVP
- ZTPV
- ZTPVB
- ZTPVP
-
Components
- Set
- Pin
- Bushing
- Set
-
Filter by CAD data type
- 2D
- 3D
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metody płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.