Mold cavity for threaded pins / hollow / HSS
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
[ ! ]When B = L - 9, the joint (h dimension) of the relief hole will not be machined because the counterbored hole depth is 4 and the S dimension is 5.
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number | Minimum order quantity | Volume Discount | RoHS | Hole tolerance | D/P (Shaft diameter) (mm) | Hole shape type | No. (Nominal diameter) (mm) | A (Hole diameter) (mm) | B (Hole depth) (mm) | C (Chamfering width) (mm) | G (Chamfering width) (mm) | L (L dimension) (mm) | R (Hole end face R) (mm) | V (Hole diameter) (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Quote | 10 | 0/-0.02 | 2.5 ～ 2.99 | SS | 3 | 1.5 ～ 2.49 | 0.5 ～ 4 | - | - | 10 ～ 60 | - | 0.8 ～ 1 | ||
| 1 | Quote | 10 | 0/-0.02 | 3 ～ 3.49 | SS | 3.5 | 1.5 ～ 2.49 | 0.5 ～ 4 | - | - | 12.5 ～ 60 | - | 0.8 ～ 1.5 | ||
| 1 | Quote | 10 | 0/-0.02 | 3.5 ～ 3.99 | SS | 4 | 1.5 ～ 2.5 | 0.5 ～ 4 | - | - | 12.5 ～ 60 | - | 0.8 ～ 2 | ||
| 1 | Quote | 10 | 0/-0.02 | 4 ～ 4.49 | SS | 4.5 | 1.5 ～ 3 | 0.5 ～ 4 | - | - | 13.5 ～ 60 | - | 0.8 ～ 2.5 | ||
| 1 | Quote | 10 | 0/-0.02 | 4.5 ～ 4.99 | SS | 5 | 1.5 ～ 3 | 0.5 ～ 4 | - | - | 13.5 ～ 60 | - | 0.8 ～ 2.5 | ||
| 1 | Quote | 10 | 0/-0.02 | 5 ～ 5.49 | SS | 5.5 | 1.5 ～ 3.99 | 0.5 ～ 4 | - | - | 14.5 ～ 60 | - | 0.8 ～ 3 | ||
| 1 | Quote | 10 | 0/-0.02 | 5.5 ～ 5.99 | SS | 6 | 1.5 ～ 4.49 | 0.5 ～ 4 | - | - | 14.5 ～ 60 | - | 0.8 ～ 4 | ||
| 1 | Quote | 10 | 0/-0.02 | 3 | SS | - | 1.5 ～ 2 | 0.5 ～ 4 | - | - | 11.5 ～ 60 | - | 0.8 ～ 1.5 | ||
| 1 | Quote | 10 | 0/-0.02 | 3.5 | SS | - | 1.5 ～ 2.5 | 0.5 ～ 4 | - | - | 12.5 ～ 60 | - | 0.8 ～ 2 | ||
| 1 | Quote | 10 | 0/-0.02 | 4 | SS | - | 1.5 ～ 3 | 0.5 ～ 4 | - | - | 12.5 ～ 60 | - | 0.8 ～ 2.5 | ||
| 1 | Quote | 10 | 0/-0.02 | 4.5 | SS | - | 1.5 ～ 3.5 | 0.5 ～ 4 | - | - | 13.5 ～ 60 | - | 0.8 ～ 3 | ||
| 1 | Quote | 10 | 0/-0.02 | 5 | SS | - | 1.5 ～ 3.5 | 0.5 ～ 4 | - | - | 13.5 ～ 60 | - | 0.8 ～ 3.5 | ||
| 1 | Quote | 10 | 0/-0.02 | 5.5 | SS | - | 1.5 ～ 4 | 0.5 ～ 4 | - | - | 14.5 ～ 60 | - | 0.8 ～ 4 | ||
| 1 | Quote | 10 | 0/-0.02 | 6 | SS | - | 1.5 ～ 4.5 | 0.5 ～ 4 | - | - | 14.5 ～ 60 | - | 0.8 ～ 4.5 | ||
| 1 | Quote | 10 | 0/-0.01 | 2.5 ～ 2.99 | SS | 3 | 1.5 ～ 1.99 | 0.5 ～ 4 | - | - | 10 ～ 60 | - | 0.8 ～ 1 | ||
| 1 | Quote | 10 | 0/-0.01 | 3 ～ 3.49 | SS | 3.5 | 1.5 ～ 2.49 | 0.5 ～ 4 | - | - | 12.5 ～ 60 | - | 0.8 ～ 1.5 | ||
| 1 | Quote | 10 | 0/-0.01 | 3.5 ～ 3.99 | SS | 4 | 1.5 ～ 2.99 | 0.5 ～ 4 | - | - | 12.5 ～ 60 | - | 0.8 ～ 2 | ||
| 1 | Quote | 10 | 0/-0.01 | 4 ～ 4.49 | SS | 4.5 | 1.5 ～ 3 | 0.5 ～ 4 | - | - | 13.5 ～ 60 | - | 0.8 ～ 2.5 | ||
| 1 | Quote | 10 | 0/-0.01 | 4.5 ～ 4.99 | SS | 5 | 1.5 ～ 3 | 0.5 ～ 4 | - | - | 13.5 ～ 60 | - | 0.8 ～ 2.5 | ||
| 1 | Quote | 10 | 0/-0.01 | 5 ～ 5.49 | SS | 5.5 | 1.5 ～ 3.5 | 0.5 ～ 4 | - | - | 14.5 ～ 60 | - | 0.8 ～ 3 | ||
| 1 | Quote | 10 | 0/-0.01 | 5.5 ～ 5.99 | SS | 6 | 1.5 ～ 4 | 0.5 ～ 4 | - | - | 14.5 ～ 60 | - | 0.8 ～ 4 | ||
| 1 | Quote | 10 | 0/-0.01 | 3 | SS | - | 1.5 ～ 2 | 0.5 ～ 4 | - | - | 11.5 ～ 60 | - | 0.8 ～ 1.5 | ||
| 1 | Quote | 10 | 0/-0.01 | 3.5 | SS | - | 1.5 ～ 2.5 | 0.5 ～ 4 | - | - | 12.5 ～ 60 | - | 0.8 ～ 2 | ||
| 1 | Quote | 10 | 0/-0.01 | 4 | SS | - | 1.5 ～ 3 | 0.5 ～ 4 | - | - | 12.5 ～ 60 | - | 0.8 ～ 2.5 | ||
| 1 | Quote | 10 | 0/-0.01 | 4.5 | SS | - | 1.5 ～ 3.5 | 0.5 ～ 4 | - | - | 13.5 ～ 60 | - | 0.8 ～ 3 | ||
| 1 | Quote | 10 | 0/-0.01 | 5 | SS | - | 1.5 ～ 3.5 | 0.5 ～ 4 | - | - | 13.5 ～ 60 | - | 0.8 ～ 3.5 | ||
| 1 | Quote | 10 | 0/-0.01 | 5.5 | SS | - | 1.5 ～ 4 | 0.5 ～ 4 | - | - | 14.5 ～ 60 | - | 0.8 ～ 4 | ||
| 1 | Quote | 10 | 0/-0.01 | 6 | SS | - | 1.5 ～ 4.5 | 0.5 ～ 4 | - | - | 14.5 ～ 60 | - | 0.8 ～ 4.5 |
Loading...
Basic information
| Material | SKH51 | Shaft diameter tolerance | 0/-0.005 | With/without gas release shape | Yes |
|---|
Configure
Basic Attributes
-
Hole tolerance
- 0/-0.02
- 0/-0.01
-
D/P (Shaft diameter)(mm)
-
No. (Nominal diameter)(mm)
-
A (Hole diameter)(mm)
-
B (Hole depth)(mm)
-
C (Chamfering width)(mm)
-
G (Chamfering width)(mm)
-
L (L dimension)(mm)
-
R (Hole end face R)(mm)
-
V (Hole diameter)(mm)
-
Type
- GV-BCHBS-CG
- GV-BCHBS-CS
- GV-BCHBS-RG
- GV-BCHBS-SG
- GV-BCHBS-SS
- GV-BCHS-CG
- GV-BCHS-CS
- GV-BCHS-RG
- GV-BCHS-SG
- GV-BCHS-SS
- GV-BCVBS-CG
- GV-BCVBS-CS
- GV-BCVBS-RG
- GV-BCVBS-SG
- GV-BCVBS-SS
- GV-BCVS-CG
- GV-BCVS-CS
- GV-BCVS-RG
- GV-BCVS-SG
- GV-BCVS-SS
-
Hole shape type
- SS
- CS
- SG
- CG
- RG
-
Filter by CAD data type
- 2D
- 3D
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metody płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.