Warunki filtrowania
- Material
- Shaft diameter tolerance
- L dimension tolerance
- D/P (Shaft diameter)(mm)[0.8–0.99/0.01mm jedn.]
- Tip shape
- No. (Nominal diameter)(mm)
- 1
- L (L dimension)(mm)[10–100/0.01mm jedn.]
- Type
- CAD
- 2D
- 3D
- Szacowane dni wysyłki
- Wszystko
- W ciągu 6 dni robocze
Dodatkowa opcje
- C (C chamfering width on the tip)(mm)[0.1–0.3/0.1mm jedn.]
- Single flat cutting [KC](mm)[0.3–1.4/0.005mm jedn.]
- Two flats cutting [WKC](mm)[0.3–1.4/0.005mm jedn.]
- Varied width parallel flats cutting [KAC](mm)[0.3–1.4/0.005mm jedn.]
- Varied width parallel flats cutting [KBC](mm)[0.3–1.4/0.1mm jedn.]
- Two flats (right angled) cutting [RKC](mm)[0.3–1.4/0.005mm jedn.]
- Three flats cutting [DKC](mm)[0.3–1.4/0.005mm jedn.]
- Four flats cutting [SKC](mm)[0.3–1.4/0.005mm jedn.]
- Two flats (angled) cutting [KGC](mm)[0.3–1.4/0.005mm jedn.]
- AG (Key flat cutting angle)(°)[1–359/1° jedn.]
- Three flats cutting (at 120°) [KTC](mm)[0.3–1.4/0.005mm jedn.]
- Head diameter change [HC](mm)[0.6–2.9/0.1mm jedn.]
- Head diameter change (Precision) [HCC](mm)[1.1–2.6/0.1mm jedn.]
- Head thickness change [TC](mm)[1.5–3.9/0.1mm jedn.]
- Relief under the head
- Improves C chamfering(CKC)[0.1–0.3/0.05]
Core pins / cylindrical / with head / tool steel / D, L 0.01mm / face form selectable (CPDBLC1-[10-100/0.01]-P[0.8-0.99/0.01])
Rysunek konturowy
