Warunki filtrowania
- Material
- L dimension tolerance
- D/P (Shaft diameter)(mm)[2–2.495/0.005mm jedn.]
- Tip shape
- No. (Nominal diameter)(mm)
- 2.5
- L (L dimension)(mm)[10–100/0.01mm jedn.]
- R (Tip R chamfering)(mm)[1–3.7/0.1mm jedn.]
- Type
- CAD
- 2D
- 3D
- Szacowane dni wysyłki
- Wszystko
- W ciągu 7 dni robocze
Dodatkowa opcje
- Single flat cutting [KC](mm)[1–2.4/0.0025mm jedn.]
- Two flats cutting [WKC](mm)[1–2.4/0.0025mm jedn.]
- Varied width parallel flats cutting [KAC](mm)[1–2.4/0.0025mm jedn.]
- Varied width parallel flats cutting [KBC](mm)[1–2.4/0.1mm jedn.]
- Two flats (right angled) cutting [RKC](mm)[1–2.4/0.0025mm jedn.]
- Three flats cutting [DKC](mm)[1–2.4/0.0025mm jedn.]
- Four flats cutting [SKC](mm)[1–2.4/0.0025mm jedn.]
- Two flats (angled) cutting [KGC](mm)[1–2.4/0.0025mm jedn.]
- AG (Key flat cutting angle)(°)[1–359/1° jedn.]
- Three flats cutting (at 120°) [KTC](mm)[1–2.4/0.0025mm jedn.]
- Head diameter change [HC](mm)[2–4.9/0.1mm jedn.]
- Head diameter change (Precision) [HCC](mm)[2.5–4.6/0.1mm jedn.]
- Head thickness change [TC](mm)[1.5–3.9/0.1mm jedn.]
- Relief under the head
- Gas vent machining
- GS (Gas vent dimension)(mm)[2–12/1mm jedn.]
- GB (Gas vent dimension)(mm)[4–30/1mm jedn.]
Core pins / cylindrical / with head / HSS / L 0,01mm / face form selectable (CPVBLB2.5-[10-100/0.01]-P[2-2.495/0.005]-R[1-3.7/0.1])
Rysunek konturowy
