Warunki filtrowania
- Shaft diameter tolerance (Reference tolerance)
- L dimension tolerance (Reference tolerance)
- Head thickness
- D/P (Shaft diameter)(mm)[1.5–1.99/0.01mm jedn.]
- Tip shape
- No. (Nominal diameter)(mm)
- 2
- L (L dimension)(mm)[50–250/0.01mm jedn.]
- R(mm)[1.5–15/0.1mm jedn.]
- Type
- CAD
- 2D
- 3D
Dodatkowa opcje
- Flat cutting position change [AKC](°)[1–359/1° jedn.]
- Parallel two flats cutting (angled) [AWC](°)[0–359/1° jedn.]
- Right angled two flats cutting (angled) [ARC](°)[0–359/1° jedn.]
- Three flats (angled) cutting [ADC](°)[0–359/1° jedn.]
- Two flats (angled) cutting [KGA](°)[0–359/1° jedn.]
- Two flats (angled) cutting [KGB](°)[0–359/1° jedn.]
- Varied width parallel flats cutting [KAC](mm)[1–1.9/0.1mm jedn.]
- Varied width parallel flats cutting [KBC](mm)[1–1.9/0.1mm jedn.]
- Head diameter change [HC](mm)[3–4.9/0.1mm jedn.]
- Head diameter change (Precision) [HCC](mm)[3–4.6/0.1mm jedn.]
- Head thickness change [TC](mm)[2–3.9/0.1mm jedn.]
Ejector pins / head flattened on one side / EN 1.3343 Equiv. / machined end / shaft diameter, length Configurable (EPHB4A2-[50-250/0.01]-P[1.5-1.99/0.01]-R[1.5-15/0.1])
Rysunek konturowy
