Button Dies Extracting Tools (BDNK15)

MISUMI

Product Details:

Manufacturer part number: BDNK15

Brand: MISUMI

Price: 171.45 €

Delivery time: 5 Days

Technical Data:

Sales Form: Puller (single item)

Applicable Die Hole Shape: Round (A)

Applicable Die Inner Diameter Range: 15.0 - 15.9 mm

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

BDNK15

Save
Product data
CAD data not available

Product specification
Part Numbers

Specifications table

No.	Product	Applicable die hole shape	Applicable die inner diameter range (mm)	Catalog No. (single item)		Catalog No. (set product)
①	Puller	Round (A)	5.5-5.9	BDNK	5	BDNKSET
②			6.0-6.9		6
③			7.0-7.9		7
④			8.0-8.9		8
⑤			9.0-9.9		9
⑥			10.0-10.9		10
⑦			11.0-11.9		11
⑧			12.0-12.9		12
⑨			13.0-13.9		13
⑩			14.0-14.9		14
⑪			15.0-15.9		15
⑫		Shaped (D/R/E/G)	4.0×10.0		S
⑬		Shaped (D/R/E/G)	6.0×14.0		L
⑭	Joint nut	-		-
⑮	Holder cap	-		-

No.①-② is exclusively for the round hole (A) die.
No..⑬/⑭ is exclusively for the shaped hole (D/R/E/G) die.
No.⑭ is a part that connects to the dowel pin extractors, and helps in extraction work.
Cannot be used with button die lower hole larger than 16.7 mm.
Dowel pin extractor is not included.

Order

Delivery

Related information

■ Features
The button die can be extracted from the top surface of the die.
Compared to the conventional striking work, there is no need to remove the inserted part or to reverse the mold.

Applicable button die type list
Mounting portion			Inner shape
Straight	Dowel Pins	Headed type	Stepped	Angular
Can be used	Can be used	Cannot be used	Can be used	Cannot be used

Because the structure is so that it is pulled out by hooking it on the lower hole of the button die, it may not be pulled out if it is not hooked enough.

■ Usage (In case round hole dies)

1. Measure the inner diameter of the button die.

Button Dies Extracting Tools

Button die inner diameter 8.36 mm

2. Select a puller applicable to the measured
inner diameter

Button Dies Extracting Tools

In this case (8.36 mm inner diameter), select the
tool whose applicable dimensions are from 8.0
to 8.9 mm.

3-1. Loosen the upper nut of the puller and insert it
into the button die.

Button Dies Extracting Tools

3-2. Tighten the nut and check for the hooking
against the lower hole of the button die.

Button Dies Extracting Tools

4. After tightening the nut with your hand,
rotate it two to three times with a spanner to tighten it
further.

Button Dies Extracting Tools

5. Install the joint nut so that it is in close contact
with the button die.

Button Dies Extracting Tools

In No.⑪ / ⑫, a gap is caused between
the joint nut and the button die depending on the
hole depth of the button die.

6. Attach the dowel pin extractor.

Button Dies Extracting Tools

Move the hammer up and down several times
to make sure the puller is properly fixed.

7. Slide the hammer and pull out the button die.

Button Dies Extracting Tools

You can check the usage procedure in the video.
https://jp.misumi-ec.com/r/bdnkset/

Precautions for use
• Do not use this product for any purpose other than button die replacement work.
• Use a puller that applies to the button die inner diameter size.
• Headed button dies and angular relief button dies cannot be used.

Button Dies Extracting Tools

Data to be displayed: 30; 45; 60

Part Number
BDNK15

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Sales Form	Applicable Die Hole Shape	Applicable Die Inner Diameter Range (mm)
	171.45 €	1		5 Days	Puller (single item)	Round (A)	15.0 - 15.9

This page is Button Dies Extracting Tools, part number BDNK15.
You can find the detail information about specifications and dimensions on part number BDNK15.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Type
- BDNK10
- BDNK11
- BDNK12
- BDNK13
- BDNK14
- BDNK15
- BDNK5
- BDNK6
- BDNK7
- BDNK8
- BDNK9
- BDNKL
- BDNKS
- BDNKSET
Clear
Sales Form
- Puller (single item)
- Set product
Clear
Applicable Die Hole Shape
- Round (A)
- Shaped (D/R/E/G)
Clear
Applicable Die Inner Diameter Range(mm)
- 4.0×10.0
- 5.5 - 5.9
- 6.0 - 6.9
- 6.0×14.0
- 7.0 - 7.9
- 8.0 - 8.9
- 9.0 - 9.9
- 10.0 - 10.9
- 11.0 - 11.9
- 12.0 - 12.9
- 13.0 - 13.9
- 14.0 - 14.9
- 15.0 - 15.9
Clear

Filter by standard shipping days

All

5 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
BDNK12
BDNK13
BDNK14
BDNK5
BDNK6
BDNK7

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	Sales Form	Applicable Die Hole Shape	Applicable Die Inner Diameter Range (mm)
162.07 €	1	5 Days	Puller (single item)	Round (A)	12.0 - 12.9
169.13 €	1	5 Days	Puller (single item)	Round (A)	13.0 - 13.9
169.85 €	1	5 Days	Puller (single item)	Round (A)	14.0 - 14.9
124.38 €	1	5 Days	Puller (single item)	Round (A)	5.5 - 5.9
162.31 €	1	5 Days	Puller (single item)	Round (A)	6.0 - 6.9
162.27 €	1	5 Days	Puller (single item)	Round (A)	7.0 - 7.9