Square End Mills (HSS)（Torsion Angle (θ)：Standard Helix (30˚ to 40˚)）

127

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 13 Days or Less

?* Information on days to ship and prices

End Mill (Multi-Flute Center-Cutting Long Type), CC-EML

OSG

4-cutter end mill with centre cut in long design using cobalt high-speed steel as base material. Suitable for deep cuts.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.92 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

AS Coated High-Speed Steel Square End Mill, 4-Flute / Long

MISUMI

[Features]
-Suitable for deep cavity milling
-It has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.

Volume Discount

AS
4 Flutes
L (Long)

Select to compare

Configure now
Starting from^∗ ：	26.77 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

End Mill (Multi-Flute Long-Shank Long Type), LS-EML

OSG

General purpose 4 flute cutter with long shank made of cobalt high speed steel as base material. Suitable for deep cuts.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	32.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Multi-Flute Center Cut Short CC-EMS

OSG

Cobalt high speed steel centre cut.
Tool material: Cobalt high speed steel, Working material: General steel/stainless steel/cast iron/aluminium/copper
Coating: Uncoated, Standard/ageing category: Manufacturer's standard product, Number of flutes (pcs.): 4
Skew angle: standard spiral (30 to 44°).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.82 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model

MISUMI

[Features]
-Uncoated long flute 2 flute type of high speed steel powder square which can expect for durability
-Suitable for deep cavity milling
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

Non-Coated
2 Flutes
L (Long)

Select to compare

Configure now
Starting from^∗ ：	23.76 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Super Hard, 4-Flute 4SE

NACHI(FUJIKOSHI)

General-purpose end-mill that performs machining of workpiece materials from carbon steel and stainless steel to aluminum. Suitable for side surface processing.

Select to compare

Configure now
Starting from^∗ ：	34.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

AG Mill, 4-Flute 4AGE

NACHI(FUJIKOSHI)

Performs high-speed, high-efficiency machining of workpiece materials from carbon steel and stainless steel to aluminum. Suitable for side surface processing.

Select to compare

Configure now
Starting from^∗ ：	31.38 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

3S End Mill, 4-Flute Long Blade

FUKUDA

Long blade for cutting such as deep grooving and wide widths Repolishing is easy

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	48.94 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular

MISUMI

[Features]
-High-speed steel powder square regular blade length 2-flute type, which can expect for durability
-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.

Volume Discount

AS
2 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	28.54 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular

MISUMI

[Features]
-High-speed steel square cutter with 2 cutting edges and regular cutting edge length, where the cutting diameter can be specified in 0.01 mm steps
-Can be reground. Please refer to the "Regrinding service" page for information on application procedures, range of services, prices, etc.

Non-Coated
2 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

Promotional pricing ends 30/11/2024

2-Flute General Use, Short EDS

OSG

High speed steel square series.
Tool material: Cobalt high speed steel, Working material: General steel/stainless steel/cast iron/aluminium/copper
Coating: Uncoated, Standard/Alteration category: Manufacturer's standard product, Number of flutes (pcs.): 2
Zerration angle: Standard helix (30 to 44°).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.46 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

End Mill (2-Flute Short Type for Aluminum), AL-EDS

OSG

Short 2-flute cutter for aluminium alloys using cobalt high-speed steel as base material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.82 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

3S End Mill, 2-Flute Extra Long Blade

FUKUDA

Long blade for deep grooving such as die engraving and wide carving Abundant variety of sizes

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	43.96 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

3S End Mill, 4-Flute Extra Long Blade

FUKUDA

Long blade for cutting such as deep grooving and wide widths Repolishing is easy

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	48.94 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

AL1T for 1-Flute Aluminum Sash

SANKO MFG

An end mill for machining aluminium wings.
Tool material: Cobalt high-speed steel, Working material: Aluminium
Coating: Uncoated, Standard/ageing category: Manufacturer's standard product, Number of cutting edges (pcs.): 1
Rotation angle: Standard helix (30 to 44°).

Select to compare

Configure now
Starting from^∗ ：	46.41 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short

MISUMI

[Features]
-High speed steel powder square short blade length 2-flute type, which can expect for durability
-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.

Volume Discount

AS
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	27.51 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long

MISUMI

[Features]
-High-speed steel powder with square long blade length, which is expected to last long
-Suitable for deep cavity milling
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

AS
2 Flutes
L (Long)

Select to compare

Configure now
Starting from^∗ ：	31.08 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short

MISUMI

AS coating with excellent wear resistance achieves the high-precision finish even in prolonged processing

Volume Discount

AS
4 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	29.26 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular

MISUMI

[Features]
-Achieves high resistance in a variety of materials, from raw materials to heat-treated steel
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

AS
4 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	31.38 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long

MISUMI

[Features]
-Achieves high resistance in a wide range of materials, from raw materials to heat-treated steel
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

AS
4 Flutes
L (Long)

Select to compare

Configure now
Starting from^∗ ：	33.05 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short

MISUMI

[Features]
-High-speed steel powder for roughing with short flute length expected to last long
-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TiCN
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	23.33 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular

MISUMI

[Features]
-High speed steel powder for roughing with regular flute length expected to last long
-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TiCN
2 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	25.29 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long

MISUMI

[Features]
-High-speed steel powder roughing cutter with long flute length expected to last a long time
-Suitable for milling deep cavities
-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TiCN
2 Flutes
L (Long)

Select to compare

Configure now
Starting from^∗ ：	17.95 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short

MISUMI

Powdered HSS with high durability is available more cheaply than the cobalt HSS market price

Volume Discount

TiCN
4 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	18.82 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular

MISUMI

[Features]
-High speed steel powder grinding wheel with regular flute length and 4 flutes expected to last a long time
-Coating with excellent lubricity for wet machining and machining at cutting speeds of 40 m/min or less
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TiCN
4 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	18.82 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute / Regular

MISUMI

[Features]
-High speed steel powder roughing cutter with long flute length and 4 flutes expected to last a long time
-Suitable for deep cavity milling
-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TiCN
4 Flutes
L (Long)

Select to compare

Configure now
Starting from^∗ ：	18.82 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

AS Coated High-Speed Steel Square End Mill, 2-Flute, Short

MISUMI

[Features]
-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

AS
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	20.04 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

AS Coated High-Speed Steel Square End Mill, 2-Flute / Regular

MISUMI

Volume Discount

AS
2 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	20.63 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

AS Coated High-Speed Steel Square End Mill, 2-Flute / Long

MISUMI

[Features]
-Suitable for milling deep cavities
-It has a coating with high oxidation resistance and high hardness, and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

AS
2 Flutes
L (Long)

Select to compare

Configure now
Starting from^∗ ：	23.44 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

AS Coated High-Speed Steel Square End Mill, 4-Flute / Short

MISUMI

Volume Discount

AS
4 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	22.17 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

AS Coated High-Speed Steel Square End Mill, 4-Flute / Regular

MISUMI

[Features]
-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.

Volume Discount

AS
4 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	23.56 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Powdered High-Speed Steel Square End Mill, 2-Flute, Short / Non-Coated Model

MISUMI

[Features]
-High speed steel powder, square, uncoated, short flute length, 2 flute type, which promises long life
-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail of, prices, etc.

Volume Discount

Non-Coated
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	18.92 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Powdered High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model

MISUMI

[Features]
-High speed steel powder square uncoated regular flute length 2-flute type, which can expect for durability
-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail of, prices, etc.

Volume Discount

Non-Coated
2 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	19.98 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Powdered High-Speed Steel Square End Mill, 4-Flute / Short / Non-Coated Model

MISUMI

[Features]
-High speed steel powder, square, uncoated, short flute length, 4 flute type, which promises long life
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	21.82 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Powdered High-Speed Steel Square End Mill, 4-Flute / Regular / Non-Coated Model

MISUMI

[Features]
-High speed steel powder square uncoated regular flute length 4 flute type which can be expected for durability
-Can be reground. Please refer to the "Regrinding Service" page for how to proceed, what services you can avail, prices, etc.

Volume Discount

Non-Coated
4 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	22.54 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Powdered High-Speed Steel Square End Mill, 4-Flute / Regular / Non-Coated Model

MISUMI

[Features]
-Powdered high-speed steel, square, uncoated, long flute length, 4-flute type, which is expected to last a long time
-Suitable for milling deep cavities
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, performance range, prices, etc.

Volume Discount

Non-Coated
4 Flutes
L (Long)

Select to compare

Configure now
Starting from^∗ ：	26.12 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model

MISUMI

[Features]
-Quick-action steel uncoated, square, short, 2-bladed with up to ø50
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

Non-Coated
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	10.56 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model

MISUMI

[Features]
-High-speed steel uncoated, square, normal blade length, 2-groove type with up to ø50
-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail of, prices etc.

Volume Discount

Non-Coated
2 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	11.31 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Square End Mill, 2-Flute / Long / Non-Coated Model

MISUMI

[Features]
-High speed steel uncoated, square, long flutes, 2 flute type with up to ø50
-Suitable for deep cavity milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

Non-Coated
2 Flutes
L (Long)

Select to compare

Configure now
Starting from^∗ ：	13.32 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Square End Mill, 4-Flute, Short / Non-Coated Model

MISUMI

[Features]
-Uncoated 4 flute short cutting edge
-Effective for side milling with 40° helix angle stronger than standard helix angle
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	12.05 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Square End Mill, 4-Flute, Regular / Non-Coated Model

MISUMI

[Features]
-Uncoated 4-slot blade with normal length
-Effective for side milling with 40° helix angle, which is stronger than the standard helix angle
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	14.55 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model

MISUMI

[Features]
-Uncoated 4 flute design with long flute
-Effective for side milling with 40° helix angle stronger than standard helix angle
-Suitable for deep cavity milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
L (Long)

Select to compare

Configure now
Starting from^∗ ：	16.74 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Corner C End Mill, 2-Flute / Short Model

MISUMI

[Features]
-High-speed steel 2-flute corner chamfer cutter with selectable corner chamfer in 0.1 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices etc.

Non-Coated
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Corner C End Mill, 2-Flute / Regular Model

MISUMI

[Features]
-High speed steel cutter with 2 cutting edges and corner chamfer with selectable corner chamfer in 0.1 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Non-Coated
2 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Corner C End Mill, 4-Flute / Short Model

MISUMI

[Features]
-High-speed steel 4-flute corner chamfer cutter with selectable corner chamfer in 0.1 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Non-Coated
4 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	7 Days


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
work material
Blade shape type
Number of flutes(sheet)
Tool Material Type
Machining Application
Shank diameter (d)(mm)
Coating
Overall Length (L)(mm)
Torsion Angle (θ)
Base Blade Y/N
Underneck length (ℓ1)(mm)
shank

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare Promotional pricing ends 30/11/2024	Select to compare Promotional pricing ends 30/11/2024	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	OSG	MISUMI	OSG	OSG	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	FUKUDA	MISUMI	MISUMI	OSG	OSG	FUKUDA	FUKUDA	SANKO MFG	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	End Mill (Multi-Flute Center-Cutting Long Type), CC-EML	AS Coated High-Speed Steel Square End Mill, 4-Flute / Long	End Mill (Multi-Flute Long-Shank Long Type), LS-EML	Multi-Flute Center Cut Short CC-EMS	Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model	Super Hard, 4-Flute 4SE	AG Mill, 4-Flute 4AGE	3S End Mill, 4-Flute Long Blade	AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular	High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular	2-Flute General Use, Short EDS	End Mill (2-Flute Short Type for Aluminum), AL-EDS	3S End Mill, 2-Flute Extra Long Blade	3S End Mill, 4-Flute Extra Long Blade	AL1T for 1-Flute Aluminum Sash	AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short	AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long	AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short	AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular	AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long	TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short	TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular	TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long	TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short	TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular	TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute / Regular	AS Coated High-Speed Steel Square End Mill, 2-Flute, Short	AS Coated High-Speed Steel Square End Mill, 2-Flute / Regular	AS Coated High-Speed Steel Square End Mill, 2-Flute / Long	AS Coated High-Speed Steel Square End Mill, 4-Flute / Short	AS Coated High-Speed Steel Square End Mill, 4-Flute / Regular	Powdered High-Speed Steel Square End Mill, 2-Flute, Short / Non-Coated Model	Powdered High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model	Powdered High-Speed Steel Square End Mill, 4-Flute / Short / Non-Coated Model	Powdered High-Speed Steel Square End Mill, 4-Flute / Regular / Non-Coated Model	Powdered High-Speed Steel Square End Mill, 4-Flute / Regular / Non-Coated Model	High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model	High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model	High-Speed Steel Square End Mill, 2-Flute / Long / Non-Coated Model	High-Speed Steel Square End Mill, 4-Flute, Short / Non-Coated Model	High-Speed Steel Square End Mill, 4-Flute, Regular / Non-Coated Model	High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model	High-Speed Steel Corner C End Mill, 2-Flute / Short Model	High-Speed Steel Corner C End Mill, 2-Flute / Regular Model	High-Speed Steel Corner C End Mill, 4-Flute / Short Model
Starting from^∗	19.92 € *Unit price with basic configuration Volume Discount	26.77 € *Unit price with basic configuration Volume Discount	32.54 € *Unit price with basic configuration Volume Discount	16.82 € *Unit price with basic configuration Volume Discount	23.76 € *Unit price with basic configuration Volume Discount	34.50 € *Unit price with basic configuration	31.38 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024	48.94 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	28.54 € *Unit price with basic configuration Volume Discount	-	15.46 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	16.82 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	43.96 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	48.94 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	46.41 € *Unit price with basic configuration	27.51 € *Unit price with basic configuration Volume Discount	31.08 € *Unit price with basic configuration Volume Discount	29.26 € *Unit price with basic configuration Volume Discount	31.38 € *Unit price with basic configuration Volume Discount	33.05 € *Unit price with basic configuration Volume Discount	23.33 € *Unit price with basic configuration Volume Discount	25.29 € *Unit price with basic configuration Volume Discount	17.95 € *Unit price with basic configuration Volume Discount	18.82 € *Unit price with basic configuration Volume Discount	18.82 € *Unit price with basic configuration Volume Discount	18.82 € *Unit price with basic configuration Volume Discount	20.04 € *Unit price with basic configuration Volume Discount	20.63 € *Unit price with basic configuration Volume Discount	23.44 € *Unit price with basic configuration Volume Discount	22.17 € *Unit price with basic configuration Volume Discount	23.56 € *Unit price with basic configuration Volume Discount	18.92 € *Unit price with basic configuration Volume Discount	19.98 € *Unit price with basic configuration Volume Discount	21.82 € *Unit price with basic configuration Volume Discount	22.54 € *Unit price with basic configuration Volume Discount	26.12 € *Unit price with basic configuration Volume Discount	10.56 € *Unit price with basic configuration Volume Discount	11.31 € *Unit price with basic configuration Volume Discount	13.32 € *Unit price with basic configuration Volume Discount	12.05 € *Unit price with basic configuration Volume Discount	14.55 € *Unit price with basic configuration Volume Discount	16.74 € *Unit price with basic configuration Volume Discount	-	-	-
Min. Shipping Days	6 Days	5 Days	6 Days	6 Days	5 Days	6 Days	Same day	Same day	5 Days	7 Days	Same day	Same day	Same day	Same day	6 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	7 Days	7 Days	7 Days
Specifications		AS 4 Flutes L (Long)			Non-Coated 2 Flutes L (Long)				AS 2 Flutes R (Regular)	Non-Coated 2 Flutes R (Regular)						AS 2 Flutes S (Short)	AS 2 Flutes L (Long)	AS 4 Flutes S (Short)	AS 4 Flutes R (Regular)	AS 4 Flutes L (Long)	TiCN 2 Flutes S (Short)	TiCN 2 Flutes R (Regular)	TiCN 2 Flutes L (Long)	TiCN 4 Flutes S (Short)	TiCN 4 Flutes R (Regular)	TiCN 4 Flutes L (Long)	AS 2 Flutes S (Short)	AS 2 Flutes R (Regular)	AS 2 Flutes L (Long)	AS 4 Flutes S (Short)	AS 4 Flutes R (Regular)	Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes R (Regular)	Non-Coated 4 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)	Non-Coated 4 Flutes L (Long)	Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes R (Regular)	Non-Coated 2 Flutes L (Long)	Non-Coated 4 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)	Non-Coated 4 Flutes L (Long)	Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes R (Regular)	Non-Coated 4 Flutes S (Short)
Blade diameter (D)(φ)	3 ～ 40	3 ～ 40	10 ～ 40	2.5 ～ 40	3 ～ 25	2.5 ～ 50	2.5 ～ 50	3 ～ 50	1 ～ 25	2.7 ～ 24.99	0.45 ～ 60	1.5 ～ 30	0.8 ～ 60	3 ～ 60	6 ～ 12	1 ～ 40	3 ～ 20	3 ～ 25	3 ～ 25	3 ～ 25	1 ～ 40	1 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	1 ～ 50	1 ～ 25	3 ～ 40	3 ～ 40	3 ～ 30	1 ～ 40	1 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	1 ～ 50	1 ～ 25	3 ～ 40	3 ～ 40	3 ～ 30	3 ～ 40	3 ～ 25	3 ～ 25	3 ～ 25
Blade length (ℓ)(mm)	15 ～ 110	15 ～ 110	45 ～ 110	10 ～ 65	15 ～ 90	7 ～ 70	7 ～ 70	20 ～ 125	3.5 ～ 60	10 ～ 60	1.1 ～ 80	4 ～ 55	2.5 ～ 300	30 ～ 300	18 ～ 45	2.5 ～ 65	15 ～ 75	8 ～ 45	12 ～ 68	15 ～ 90	2.5 ～ 65	3.5 ～ 60	15 ～ 90	8 ～ 45	12 ～ 68	15 ～ 90	2.5 ～ 75	3.5 ～ 60	15 ～ 110	8 ～ 65	12 ～ 68	2.5 ～ 65	3.5 ～ 60	8 ～ 45	12 ～ 68	15 ～ 90	2.5 ～ 75	3.5 ～ 60	15 ～ 110	8 ～ 65	12 ～ 68	15 ～ 110	8 ～ 50	10 ～ 60	8 ～ 45
work material	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Aluminum[◎]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
Blade shape type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Number of flutes(sheet)	4	4	4	4	2	4	4	4	2	2	2	2	2	4	1	2	2	4	4	4	2	2	2	4	4	4	2	2	2	4	4	2	2	4	4	4	2	2	2	4	4	4	2	2	4
Tool Material Type	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Alloy HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Alloy HSS	Alloy HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS
Machining Application	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed)	Plane / Side / Groove	Groove	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove
Shank diameter (d)(mm)	6 ～ 32	6 ～ 32	10 ～ 32	6 ～ 32	6 ～ 25	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 25	6 ～ 25	6 ～ 42	6 ～ 25	6 ～ 42	6 ～ 42	8 ～ 12	6 ～ 32	6 ～ 20	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 42	6 ～ 25	6 ～ 32	6 ～ 32	6 ～ 25	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 42	6 ～ 25	6 ～ 32	6 ～ 32	6 ～ 25	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 25
Coating	Non-Coated	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	Non-Coated	Non-Coated	AG	Non-Coated	For High Hardness (Silicon Group)	TiCN / Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiCN / Non-Coated	TiCN / Non-Coated	TiCN / Non-Coated
Overall Length (L)(mm)	60 ～ 195	60 ～ 195	125 ～ 285	50 ～ 150	60 ～ 160	50 ～ 160	50 ～ 160	58 ～ 220	45 ～ 130	50 ～ 130	45 ～ 170	45 ～ 125	42 ～ 400	70 ～ 400	80 ～ 100	45 ～ 150	60 ～ 140	52 ～ 121	55 ～ 144	60 ～ 160	45 ～ 150	45 ～ 130	60 ～ 160	52 ～ 121	55 ～ 144	60 ～ 160	45 ～ 165	45 ～ 130	60 ～ 195	52 ～ 150	55 ～ 144	45 ～ 150	45 ～ 130	52 ～ 121	55 ～ 144	60 ～ 160	45 ～ 165	45 ～ 130	60 ～ 195	52 ～ 150	55 ～ 144	60 ～ 195	50 ～ 120	50 ～ 130	52 ～ 121
Torsion Angle (θ)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)
Base Blade Y/N	-	Available	-	-	Available	-	-	Available	Available	Available	-	-	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	28 ～ 66	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	Straight	-	Straight	Straight	-	-	-	-	-	-	Straight	Straight	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Stock

- Show only stock items
Clear

Blade diameter (D)(φ)
- 0.45～0.95
  - 0.45
  - 0.8
  - 0.9
  - 0.95
- 1～1.9
  - 1
  - 1/2
  - 1.05
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.59
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.38
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.97
  - 3
  - 3/4
  - 3.1
  - 3.18
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
  - 3.97
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.76
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5/8
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.56
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.05
  - 6.1
  - 6.2
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.94
  - 7
  - 7/8
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
  - 7.94
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.53
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.11
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.29
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.7
  - 15.8
  - 15.88
  - 15.9
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.46
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.9
  - 19
  - 19.05
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.6
  - 19.7
  - 19.8
  - 19.9
- 20～20.9
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.64
  - 20.7
  - 20.8
  - 20.9
- 21～21.9
  - 21
  - 21.1
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.7
  - 21.8
  - 21.9
- 22～22.9
  - 22
  - 22.1
  - 22.2
  - 22.23
  - 22.3
  - 22.4
  - 22.5
  - 22.6
  - 22.7
  - 22.8
  - 22.9
- 23～23.9
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.7
  - 23.8
  - 23.81
  - 23.9
- 24～24.9
  - 24
  - 24.1
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.7
  - 24.8
  - 24.9
- 25～25.9
  - 25
  - 25.1
  - 25.2
  - 25.3
  - 25.4
  - 25.5
  - 25.6
  - 25.7
  - 25.8
  - 25.9
- 26～26.9
  - 26
  - 26.1
  - 26.2
  - 26.3
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
  - 26.9
- 27～27.9
  - 27
  - 27.1
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.7
  - 27.8
  - 27.9
- 28～28.9
  - 28
  - 28.1
  - 28.2
  - 28.3
  - 28.4
  - 28.5
  - 28.6
  - 28.7
  - 28.8
  - 28.9
- 29～29.9
  - 29
  - 29.1
  - 29.2
  - 29.3
  - 29.4
  - 29.5
  - 29.6
  - 29.7
  - 29.8
  - 29.9
- 30～30.9
  - 30
  - 30.1
  - 30.2
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.7
  - 30.8
  - 30.9
- 31～31.9
  - 31
  - 31.1
  - 31.2
  - 31.3
  - 31.4
  - 31.5
  - 31.6
  - 31.7
  - 31.75
  - 31.8
  - 31.9
- 32～32.9
  - 32
  - 32.1
  - 32.2
  - 32.3
  - 32.4
  - 32.5
  - 32.6
  - 32.7
  - 32.8
  - 32.9
- 33～33.9
  - 33
  - 33.1
  - 33.2
  - 33.3
  - 33.4
  - 33.5
  - 33.6
  - 33.7
  - 33.8
  - 33.9
- 34～34.9
  - 34
  - 34.1
  - 34.2
  - 34.3
  - 34.4
  - 34.5
  - 34.6
  - 34.7
  - 34.8
  - 34.9
- 35～35.9
  - 35
  - 35.1
  - 35.2
  - 35.3
  - 35.4
  - 35.5
  - 35.6
  - 35.7
  - 35.8
  - 35.9
- 36～36.9
  - 36
  - 36.1
  - 36.2
  - 36.3
  - 36.4
  - 36.5
  - 36.6
  - 36.7
  - 36.8
  - 36.9
- 37～37.9
  - 37
  - 37.1
  - 37.2
  - 37.3
  - 37.4
  - 37.5
  - 37.6
  - 37.7
  - 37.8
  - 37.9
- 38～38.9
  - 38
  - 38.1
  - 38.2
  - 38.3
  - 38.4
  - 38.5
  - 38.6
  - 38.7
  - 38.8
  - 38.9
- 39～39.9
  - 39
  - 39.1
  - 39.2
  - 39.3
  - 39.4
  - 39.5
  - 39.6
  - 39.7
  - 39.8
  - 39.9
- 40～40.9
  - 40
  - 40.1
  - 40.2
  - 40.3
  - 40.4
  - 40.5
  - 40.6
  - 40.7
  - 40.8
  - 40.9
- 41～41.9
  - 41
  - 41.1
  - 41.2
  - 41.3
  - 41.4
  - 41.5
  - 41.6
  - 41.7
  - 41.8
  - 41.9
- 42～42.9
  - 42
  - 42.1
  - 42.2
  - 42.3
  - 42.4
  - 42.5
  - 42.6
  - 42.7
  - 42.8
  - 42.9
- 43～43.9
  - 43
  - 43.1
  - 43.2
  - 43.3
  - 43.4
  - 43.5
  - 43.6
  - 43.7
  - 43.8
  - 43.9
- 44～44.9
  - 44
  - 44.1
  - 44.2
  - 44.3
  - 44.4
  - 44.5
  - 44.6
  - 44.7
  - 44.8
  - 44.9
- 45～45.5
  - 45
  - 45.5
- 46～46.5
  - 46
  - 46.5
- 47～47.5
  - 47
  - 47.5
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.8
  - 50
  - 50.5
  - 50.8
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 85
- 90
- 95
- 100
[2.7-3/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-16/0.01φ Unit(s)][17-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]

Drawing

Clear

Blade length (ℓ)(mm)
1.1

1.6

1.8

2

2.2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

7.5

8

9

10

10.5

11

12

13

14

15

16

17

18

19

20

22

23

25

26

27

28

30

32

33

34

35

38

39

40

45

48

50

53

55

56

58

60

63

65

68

70

75

80

85

90

95

100

105

110

115

120

125

130

150

160

180

200

250

300
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
- Other
- Other 2
- Other 3
- Other 4
Details

Clear

Blade shape type
- Square
- For Keyway
Clear

Number of flutes(sheet)
1

2

3

4

6

8

10

12

14

16

18
Clear

Tool Material Type
- Cobalt HSS
- Powder high-speed steel
- High-speed steel
- Alloy HSS
Details

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
- Other
Images

Clear

Shank diameter (d)(mm)
4

5

BS5

6

7

8

9

10

11

12

15

16

19

20

24

25

32

42
Drawing

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- Non-Coated
- AG
Details

Clear

Overall Length (L)(mm)
- 27
- 31～38
  - 31
  - 35
  - 38
- 40～48
  - 40
  - 42
  - 45
  - 46
  - 48
- 50～59
  - 50
  - 51
  - 52
  - 53
  - 54
  - 55
  - 56
  - 57
  - 58
  - 59
- 60～69
  - 60
  - 62
  - 63
  - 64
  - 65
  - 66
  - 67
  - 68
  - 69
- 70～79
  - 70
  - 72
  - 73
  - 74
  - 75
  - 76
  - 77
  - 78
  - 79
- 80～89
  - 80
  - 82
  - 83
  - 84
  - 85
  - 89
- 90～97
  - 90
  - 91
  - 92
  - 95
  - 97
- 100～108
  - 100
  - 101
  - 104
  - 105
  - 108
- 110～119
  - 110
  - 115
  - 116
  - 119
- 120～127
  - 120
  - 121
  - 122
  - 124
  - 125
  - 127
- 130～137
  - 130
  - 132
  - 134
  - 135
  - 137
- 140～149
  - 140
  - 142
  - 144
  - 145
  - 147
  - 149
- 150～155
  - 150
  - 154
  - 155
- 160～169
  - 160
  - 162
  - 165
  - 169
- 170～178
  - 170
  - 173
  - 175
  - 178
- 180～189
  - 180
  - 182
  - 183
  - 184
  - 185
  - 186
  - 188
  - 189
- 190～198
  - 190
  - 191
  - 193
  - 195
  - 198
- 200～208
  - 200
  - 202
  - 203
  - 205
  - 208
- 210～215
  - 210
  - 213
  - 215
- 220～225
  - 220
  - 222
  - 224
  - 225
- 230～235.5
  - 230
  - 233
  - 235
  - 235.5
- 240～245.5
  - 240
  - 245
  - 245.5
- 250～255
  - 250
  - 250.5
  - 253
  - 255
- 260～265
  - 260
  - 265
- 270～275
  - 270
  - 275
- 280～288
  - 280
  - 283
  - 285
  - 288
- 290～295
  - 290
  - 295
- 300
- 340～345
  - 340
  - 345
- 350
- 395
- 400
Drawing

Clear