Shackles

?* Information on days to ship and prices

• • Promotional pricing ends 30/11/2024

  

  Shackles, cranked

  GANTER

  High-strength, cranked shackles GN 585 are made in analogy with the US Federal Specification RR-C-271 and feature sixfold safety standards, which means that the minimum failure load is at least six times greater than the value of the nominal load (WLL). The cranked shape is particularly suitable for applications where the shackles are exposed to multiple loads.
  The rated size and the nominal load (WLL) are drop-forged into the shackle which makes it easier to select the proper sling gear. In general, the nominal load must not be exceeded.
  The designs with nut and split pin (Type B) are normally recommended for permanent connections. The bolts are allowed to rotate, and the nuts are secured against inadvertent loosening with a split pin.
  Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.10 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Bow shackles (K1058)

  KIPP

  [Specifications]
  ・Product Type: Bow shackles
  ・Main material: Steel
  
  [Features]
  ・For hoisting and transport tasks
  ・Application sectors: machine and fixture construction, toolmaking, logistics, material handling
  ・Version: Bow form

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.25 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Load rings

  GANTER

  Load rings GN 5860 rotate running in ball bearings. The freely rotating ring allows the bolts to hold loads in any tensile direction.
  The rated load-bearing capacity is shown clearly on the load ring. It is valid for the most unfavourable case in terms of the types of load listed opposite. Load rings GN 5860 comply with Machine Engineering Directive 2006 / 42 / EG and are BG tested.
  The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	179.38 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Link for round slings steel (07797)

  NORELEM

  · For joining hoisting belts or round slings to chain components
  
  · Load capacity up to 10,000 kg
  
  · With BG approval and H stamp

  Select to compare

  Configure now
  Starting from∗ ：	23.63 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Load hooks (GN 5862)

  GANTER

  Load hooks GN 5862 rotate running in ball bearings. The freely rotating hook allows the bolts to hold loads in any allowed tensile direction.
  
  The rated load carrying capacity listed in the table is shown clearly on bearing case. It applies to the most unfavourable load application of the load types listed opposite.
  
  Load hooks GN 5862 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
  
  The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	258.98 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Load rings for welding

  GANTER

  [Specifications]
  ・Product Type: Load rings
  
  GN 587.1 for welding are designed for rapid mounting.They provide high dynamic and static strength and can be load from any direction with approved safety ( safety factor 4 ) for all loading directions.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	58.72 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  D-Shackles (K1059)

  KIPP

  [Specifications]
  ・Product Type: D-Shackles
  ・Main material: Steel
  
  [Features]
  ・For hoisting and transport tasks
  ・Application sectors: machine and fixture construction, toolmaking, logistics, material handling
  ・Version: D form

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.21 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Lifting points for welding

  GANTER

  Lifting points GN 589 are distinguished for their very low dimensions. They provide high dynamic and static strength and can be load from any direction with approved safety (safety factor 4) for all loading directions.
  The rated load carrying capacity listed in the above table is clearly marked on the lifting point. It applies to the most unfavourable load application of the load types listed opposite.
  Lifting points GN 589 comply with Mechanical Engineering Directive 2006 / 42 / EG.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	56.78 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Load rings (rotating), Steel

  GANTER

  The load rings GN 586 can be folded and rotated into all directions, carrying the full load in any tension direction.
  They offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).
  The rated load carrying capacity listed in the above table is clearly marked on the attachment bolt. It applies to the most unfavourable load application of the load types listed opposite.
  Load rings GN 586 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
  The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	164.60 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Shackles, straight

  GANTER

  High-strength, straight shackles GN 584 are made in analogy with the US Federal Specification RR-C-271 and feature sixfold safety standards, which means that the minimum failure load is at least six times greater than the value of the nominal load (WLL).
  The rated size and the nominal load (WLL) are drop-forged into the shackle which makes it easier to select the proper sling gear. In general, the nominal load must not be exceeded.
  The designs with nut and split pin (Type B) are normally recommended for permanent connections. The bolts are allowed to rotate, and the nuts are secured against inadvertent loosening with a split pin.
  Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  D-Shackles (07716)

  NORELEM

  · For hoisting and transport tasks
  
  · Application sectors: machine and fixture construction, toolmaking, logistics, material handling

  Select to compare

  Configure now
  Starting from∗ ：	2.76 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Link, steel (07795)

  NORELEM

  · Used as a coupling link in chain slings
  
  · Load capacity up to 10,000 kg
  
  · With BG approval and H stamp

  Select to compare

  Configure now
  Starting from∗ ：	14.84 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Bow shackles (07715)

  NORELEM

  · For hoisting and transport tasks
  
  · Application sectors: machine and fixture construction, toolmaking, logistics, material handling

  Select to compare

  Configure now
  Starting from∗ ：	2.83 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...