Hold Clamp, Stopper (Part Numbers)
Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Loading...
Basic information
| a(mm) | 69 | b(mm) | 35 | c(mm) | 40 |
|---|---|---|---|---|---|
| d(mm) | 23 | e(mm) | 17 | f(mm) | 54 |
| g(mm) | 22 | h(mm) | 16 | i(mm) | M12 |
| j(mm) | 7.5 | k(mm) | 4 | l(mm) | 10 |
| Mass(kg) | 1.1 | Material | S50C | T Slot Nut P(mm) | 44 |
| D Size Tolerance(mm) | ±0.005 | Heat Treatment | Hardening HRC50 | Surface Treatment | Main Body Painted, Bolt, T-nut: Black Oxide Finish |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Metody płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.