Rejestracja
Warunki filtrowania

MHF2, Air Gripper, 2 Finger, Low Profile (MHF2-8D2R-X83B1)

Numer części:

MHF2-8D2R-X83B1
Wyczyść
Ilość:

Informacje o produkcie

MHF2 Series Low Profile Air Gripper Specifications

Double acting, inner-diameter grip JIS symbol

Double acting, internal grip JIS symbol

Double acting, outer-diameter grip JIS symbol

Double acting, external grip JIS symbol

Body option: axial ported (Nil) external appearance

Body option: axial ported (Nil) external appearance

Body option: side ported (R) external appearance

Body option: side ported (R) external appearance

FluidAir
Operating pressureø8 (diameter 8 mm): 0.15 to 0.7 MPa
ø12 to 20 (diameter 12 to 20 mm): 0.1 to 0.7 MPa
Ambient and fluid temperature-10°C to +60℃ (no freezing)
Repeatability±0.05 mm*1
Maximum operating frequencyShort stroke120 c.p.m.
Middle stroke120 c.p.m.
Long stroke60 c.p.m.
LubricationNon-lube
ActionDouble acting
Auto switch (option)*2Solid state auto switch (3-wire, 2-wire)

*1 Value when no unbalanced load is applied to the finger. If the finger is subjected to an unbalanced load, the backlash of the rack pinion can be up to ±0.15 mm.
*2 See the manufacturer's catalog for detailed specifications of auto switches.

Model

ActionModelCylinder bore
(mm)
Gripping force*1Opening/closing stroke
(Both sides) mm
Weight*2
g
Unobstructed capacity (cm3)
Effective gripping force per finger NFinger opening sideFinger closed side
Double actingMHF2-8D8198650.70.6
MHF2-8D116851.11.0
MHF2-8D2321202.01.9
MHF2-12D1248121551.91.6
MHF2-12D1241903.33.0
MHF2-12D2482756.15.8
MHF2-16D1690163504.94.1
MHF2-16D1324458.27.4
MHF2-16D26465014.914.0
MHF2-20D20141206458.77.3
MHF2-20D14085015.113.7
MHF2-20D2801,22528.026.6

*1 Values based on pressure of 0.5 MPa, gripping point L = 20 mm.
*2 Values above do not include auto switch weight.

Structure drawing

MHF2-8D, MHF2-8D1 structure drawing

MHF2-8D, MHF2-8D1 structure drawing

MHF2-8D2 structure drawing

MHF2-8D2 structure drawing

No.DescriptionMaterialNote
1BodyAluminum alloyHard anodized
2PistonStainless steel-
3JointStainless steelHeat treatment
4Guide railStainless steelHeat treatment
5FingerStainless steelHeat treatment
6Roller stopperStainless steel-
7PinionCarbon steelNitriding
8Cap AAluminum alloyClear anodized
9Cap BAluminum alloyClear anodized
10Cap CAluminum alloyClear anodized
No.DescriptionMaterialNote
11Head bumperUrethane rubber-
12ClipStainless steel wire-
13RackStainless steelNitriding
14Magnet-Nickel plated
15Steel ballHigh carbon chrome bearing steel-
16Wear ringSynthetic resin-
17RollerHigh carbon chrome bearing steel-
18Needle rollerHigh carbon chrome bearing steel-
19Parallel pinStainless steel-
20Piston sealNBR-
21GasketNBR-
MHF2-12D□ to 20D□ structure drawing

MHF2-12D□ to 20D□ structure drawing

No.DescriptionMaterialNote
1BodyAluminum alloyHard anodized
2PistonAluminum alloyClear anodized
3JointStainless steelHeat treatment
4Guide railStainless steelHeat treatment
5FingerStainless steelHeat treatment
6Roller stopperStainless steel-
7PinionCarbon steelNitriding
8Cap AAluminum alloyClear anodized
9Cap BAluminum alloyClear anodized
10Cap CAluminum alloyClear anodized
11Head bumperUrethane rubber-
12RackStainless steelNitriding
13Magnet-Nickel plated
14Steel ballHigh carbon chrome bearing steel-
15Wear ringSynthetic resin-
16ø12 (diameter 12 mm): RollerHigh carbon chrome bearing steel-
ø16 to 20 (diameter 16 to 20 mm): Parallel pinStainless steel-
17Needle rollerHigh carbon chrome bearing steel-
18ø12 (diameter 12 mm): R-shaped retaining ringCarbon steelPhosphate coated
ø16 to 20 (diameter 16 to 20 mm): Type C retaining ring
19Parallel pinStainless steel-
20Piston sealNBR-
21GasketNBR-
22GasketNBR-

External dimensional drawing

 

(Unit: mm)

 

MHF2-8D dimensional drawing

MHF2-8D dimensional drawing

*If mounting holes are used, use the hex socket head cap screw (accessory).

 

(Unit: mm)

 

MHF2-8D A detail dimensional drawing

MHF2-8D A detail dimensional drawing

 

(Unit: mm)

 

MHF2-8D auto switch mounting groove dimensional drawing

MHF2-8D auto switch mounting groove dimensional drawing

Precautions

  • *Be sure to read the product precautions in the manufacturer's catalog before use.
  • *See the manufacturer's catalog for information other than the above.

Lista numerów części

Liczba pozycji
Numer części
MHF2-8D2R-X83B1

Dimensions when open

(mm)

Dimensions when closed

(mm)

Gripping Force (when 0.5Mpa at opening)

(N)

Gripping Force (when 0.5Mpa at closing)

(N)

Additional Function

Stroke Adjustment Mechanism

Operating Pressure Range

(MPa)

Cylinder internal diameter

(mm)

Body options

Auto switch

Number of switches

Lead wire length

Stroke

(mm)

Made to order specifications

Connector type for gripper opening/closing

Stroke adjustment width

(mm)

Type

Minimalna wielkość zamówienia
32
0
19
19
With Linear Guide / Stroke Adjustment Function
Open Direction Adjustment
0.15~0.7
8
Side piping
Without auto switch
None
None
32
With adjuster for finger opening/closing width adjustment
None
12
-
1 szt.
Cena jednostkowa (bez VAT)(Cena jednostkowa z podatkiem)
Standardowa data wysyłki
578.26 €
( 688.13 € )
26 dni robocze

Szczegółowe informacje

Podstawowe informacje

[Features]
· Low profile: Height is approximately 1/3 smaller (compared to product with equivalent gripping force from the MHZ2 Series).
· Contributes to device space saving measures.
· Reduces bending moments.
· Operates smoothly, providing improved accuracy.
· The stroke length can be selected.
& nbsp3 standard stroke lengths (short, middle and length) are available for each bore size.
& nbspYou can select the optimal stroke for each workpiece.
· Improved mounting repeatability.
· Piping from either direction.
· Easy positioning for mounting attachments.
· Wiring and piping can be centralized.
· High degree of mounting flexibility.
& nbspBracket not required.
& nbspCan help keep mounting height to a minimum.
· A compact design in which a large amount of gripping force is provided through the use of a double piston mechanism.

Przestroga

  • Refer to the catalog for details on product specifications.
  • Product images may be representative. Refer to the manufacturer's catalog for details.