Vacuum Switch, Diaphragm Style, ZSM1 (ZSM1-015L)

SMC

Product Details:

Manufacturer part number: ZSM1-015L

Brand: SMC

Price: 93.73 €

Delivery time: 26 Days

Technical Data:

Pipe Port Type: [Direct Mount] ZM Ejector Mount

Plumbing Thread Type: -

Nominal Pipe Thread Size: -

Operating Temperature Range: -5～60 ℃

No. of Inputs: 1

(i)Remark

Product images may be representative images. Refer to the manufacturer's catalog for details

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

ZSM1-015L

Product specification
Part Numbers
Catalog

Specifications of Vacuum Pressure Switch / Diaphragm Type

External appearance of vacuum pressure switch / diaphragm type

Connection method of ZSM1-115

Internal circuit of ZSM1-115

Brown lead wire: Connect to the power supply (+) terminal is necessary to operate the switch main circuit.
Black lead wire: Connect to the load. (PLC input, relay)
Blue lead wire: Connect to the power supply GND terminal.

Internal circuit of ZSM1-121

Specifications

Model	ZSM1-115	ZSM1-121
Switch specifications	Solid state	Contact (Reed Switch)
Fluid	Air and inert gas
Maximum operating pressure	0.5 MPa
Set pressure range	-27 to -80 kPa
Hysteresis	Max. 15 kPa	Max. 20 kPa
Repeat accuracy	±10% or less
Ambient and fluid temperature	-5～+60℃ (No freezing)
Supply voltage	DC4.5 to 28 V	100 V AC/DC or less
Indicator Light	ON lights
Lead number	3	2
Port Size	R1/8
Weight	65 g

Electrical Specifications

ZSM1-115

Supply voltage: DC4.5 to 28 V
Output (Open Collector): 28 V. Max 40 mA
Current Consumption: 10 mA or less (DC24V)

ZSM1-121

Supply voltage: AC／DC100V
Maximum operating current range: 24 V or less: 50 mA, 48 V: 40 mA, 100 V: 20 mA
Max. Contact Capacity: AC2VA, DC2W

Dimensions

(Units: mm)

Dimensional drawing of vacuum pressure switch / diaphragm type

Dimensional drawing of ZSM1-115

Dimensional drawing of ZSM1-121

Notes

Wiring

Contact protection box internal circuit

* 1Do not apply pulling force to the power cord. It may cause damage.
* 2Wiring precautions for ZSM1-121: When ZSM1-121 is connected in series, a voltage drop occurs due to the internal resistance of the light emitting diode. The voltage drop is approx. 2 V per switch. After checking the minimum drive voltage on the drive side, use within the range possible.
* 3Since it does not have a built-in contact protection circuit, use the contact protection box (CD-P11) with an inductive load or a lead wire of 5 m or longer.
* 4Contact protection box / connection method: To connect the switch body to the contact protection box, connect the lead wire on the side labeled SWITCH on the contact protection box and the lead wire from the switch body. Also, keep the lead wire length between the switch body and the contact protection box within 1 m, and set it as close as possible.

Mounting/Piping

The main body must not be turned with a wrench

* 1When handling the product, always hold it by the body and do not apply pulling force to the power cord.
* 2When handling, do not drop or hit. It may cause damage.
* 3When mounting on the pipe, apply a wrench to the fitting and screw in. Turning the main body with a wrench may cause damage.
* 4The mounting direction can be horizontal or vertical.

Pressure source

* 1When used as a suction confirmation switch, do not suck in water. It may cause malfunction or damage
* 2Operating fluids are dedicated for air and inert gas. Corrosive fluid cannot be used.

*See the SMC catalog for information other than that detailed above.

Data to be displayed: 30; 45; 60

Part Number
ZSM1-015L

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Pipe Port Type	Plumbing Thread Type	Nominal Pipe Thread Size	Operating Temperature Range (℃)	No. of Inputs	Power Supply Type	Power Supply Voltage (V)	Acquired Standards	Lead Wire	Hysteresis (MPa)
	93.73 €	1		26 Days	[Direct Mount] ZM Ejector Mount	-	-	-5～60	1	DC	4.5 to 28	CE	3 m	0.015

Products homepage

Basic information

Type	Pressure Switch	Fluid Type	Air / Nitrogen Gas / Carbonic Acid Gas / City Gas / Methane Gas / Propane gas	Sensor/Monitor Configuration	Separate Type, Connector Joint
Output Method	Switch	Fluid Characteristics	Inert	No. of Outputs	1
Pipe Connection Direction	Down

This page is Vacuum Switch, Diaphragm Style, ZSM1, part number ZSM1-015L.
You can find the detail information about specifications and dimensions on part number ZSM1-015L.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Plumbing Thread Type
- Rc (R)
  - R
- NPT
  - NPTF
Clear
Nominal Pipe Thread Size
- 1/8
  - 1/8
Clear
Type
- ZSM1
Clear
Pipe Port Type
- Threads
  - Male thread
- Direct Mount
  - ZM Ejector Mount
Clear
No. of Inputs
- 1
Clear
Power Supply Type
- DC
- AC/DC
Clear
Power Supply Voltage(V)
- 100
- 4.5 to 28
Clear
Lead Wire
- 0.5 m
- 3
- 3 m
Clear
Hysteresis(MPa)
- 0.015
- 0.02
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

4 Days or Less

22 Days or Less

26 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
ZSM1-015
ZSM1-021
ZSM1-021L
ZSM1-115
ZSM1-115L
ZSM1-121

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	Pipe Port Type	Plumbing Thread Type	Nominal Pipe Thread Size	Operating Temperature Range (℃)	No. of Inputs	Power Supply Type	Power Supply Voltage (V)	Acquired Standards	Lead Wire	Hysteresis (MPa)
86.84 €	1	26 Days	[Direct Mount] ZM Ejector Mount	-	-	-5～60	1	DC	4.5 to 28	CE	0.5 m	0.015
68.56 €	1	26 Days	[Direct Mount] ZM Ejector Mount	-	-	-5～60	1	AC/DC	100	CE	0.5 m	0.02
75.45 €	1	4 Days	[Direct Mount] ZM Ejector Mount	-	-	-	-	AC/DC	100	-	3	-
86.84 €	1	22 Days	[Threads] Male thread	[Rc (R)] R	[1/8] 1/8	-	-	DC	4.5 to 28	-	0.5 m	-
93.73 €	1	22 Days	[Threads] Male thread	[Rc (R)] R	[1/8] 1/8	-	-	DC	4.5 to 28	-	3	-
68.56 €	1	22 Days	[Threads] Male thread	[Rc (R)] R	[1/8] 1/8	-5～60	-	AC/DC	100	-	0.5 m	-