Carbide Straight Edge Corner Angle End Mill, 2-Flute / Back Tapered Type
Click on this image to zoom in.
Click on this image to zoom in.
-Rear taper with corner angle shape for efficient machining
.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number | Minimum order quantity | Volume Discount | Shank Diameter d (mm) | Overall Length L (mm) | Processing Applications | #2 | #3 | #4 | #5 | #6 | #7 | F | T | Use | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 7 Days | 4 | 50 | Boss Hole Drilling | 3.01 ～ 4 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 1.9 | 2 ～ 15 | - | F | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 6 | 60 | Boss Hole Drilling | 3.01 ～ 6 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 2.9 | 3 ～ 24 | - | F | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 8 | 60 | Boss Hole Drilling | 4.01 ～ 8 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 3.9 | 4 ～ 28 | - | F | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 10 | 80 | Boss Hole Drilling | 6.01 ～ 10 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 4.9 | 5 ～ 35 | - | F | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 12 | 80 | Boss Hole Drilling | 8.01 ～ 12 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 5.9 | 6 ～ 36 | - | F | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 16 | 100 | Boss Hole Drilling | 10.01 ～ 16 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 7.9 | 8 ～ 48 | - | F | T | For Boss Hole Drilling | ||
| 1 | 8 Days | 4 | 80 | Boss Hole Drilling | - | 3.01 ～ 4 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 1.9 | 2 ～ 15 | F | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 6 | 90 | Boss Hole Drilling | - | 3.01 ～ 6 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 2.9 | 3 ～ 24 | F | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 8 | 90 | Boss Hole Drilling | - | 4.01 ～ 8 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 3.9 | 4 ～ 28 | F | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 10 | 120 | Boss Hole Drilling | - | 6.01 ～ 10 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 4.9 | 5 ～ 35 | F | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 12 | 120 | Boss Hole Drilling | - | 8.01 ～ 12 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 5.9 | 6 ～ 36 | F | T | For Boss Hole Drilling | ||
| 1 | 8 Days | 4 | 80 | Flank / Groove Processing | - | 3.01 ～ 4 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 1.9 | 2 ～ 15 | F | T | For Radial Groove Milling | ||
| 1 | 7 Days | 6 | 90 | Flank / Groove Processing | - | 3.01 ～ 6 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 2.9 | 3 ～ 24 | F | T | For Radial Groove Milling | ||
| 1 | 7 Days | 8 | 90 | Flank / Groove Processing | - | 4.01 ～ 8 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 3.9 | 4 ～ 28 | F | T | For Radial Groove Milling | ||
| 1 | 7 Days | 10 | 120 | Flank / Groove Processing | - | 6.01 ～ 10 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 4.9 | 5 ～ 35 | F | T | For Radial Groove Milling | ||
| 1 | 7 Days | 12 | 120 | Flank / Groove Processing | - | 8.01 ～ 12 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 5.9 | 6 ～ 36 | F | T | For Radial Groove Milling | ||
| 1 | 7 Days | 4 | 50 | Flank / Groove Processing | 3.01 ～ 4 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 1.9 | 2 ～ 15 | - | F | T | For Radial Groove Milling | ||
| 1 | 7 Days | 6 | 60 | Flank / Groove Processing | 3.01 ～ 6 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 2.9 | 3 ～ 24 | - | F | T | For Radial Groove Milling | ||
| 1 | 7 Days | 8 | 60 | Flank / Groove Processing | 4.01 ～ 8 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 3.9 | 4 ～ 28 | - | F | T | For Radial Groove Milling | ||
| 1 | 7 Days | 10 | 80 | Flank / Groove Processing | 6.01 ～ 10 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 4.9 | 5 ～ 35 | - | F | T | For Radial Groove Milling | ||
| 1 | 7 Days | 12 | 80 | Flank / Groove Processing | 8.01 ～ 12 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 5.9 | 6 ～ 36 | - | F | T | For Radial Groove Milling | ||
| 1 | 7 Days | 16 | 100 | Flank / Groove Processing | 10.01 ～ 16 | 5 ～ 85 | 0 ～ 59 | 0.1 ～ 7.9 | 8 ～ 48 | - | F | T | For Radial Groove Milling |
Loading...
Specification Table
| Model Number | Blade Diameter D 0.01mm Unit Specification | Corner Angle (Single Corner) θ °-min 1' Unit Specification | Angle Width D1 0.01mm Unit Specification | Blade Length ℓ 0.5 mm Unit Specification | End Cutting Edge Shape (Selection) | Overall Length L | ||
| Shank diameter d | ||||||||
| BSCARM | LS−BSCARM | |||||||
| SCARM | LS−SCARM | |||||||
| BSCARM LS−BSCARM (Long Shank) SCARM LS−SCARM (Long Shank) | 4 | 3.01 to 4.00 | 5°0' to 85°0' | 0.10 ≤ D1 ≤ (D−0.2)/2 | 2.0 to 15.0 | T (Indented Center) F (Flat) | 50 | 80 |
| 6 | 3.01 to 6.00 | 3.0 to 24.0 | 60 | 90 | ||||
| 8 | 4.01 to 8.00 | 4.0 to 28.0 | 60 | 90 | ||||
| 10 | 6.01 to 10.00 | 5.0 to 35.0 | 80 | 120 | ||||
| 12 | 8.01 to 12.00 | 6.0 to 36.0 | 80 | 120 | ||||
| 16 | 10.01 to 16.00 | 8.0 to 48.0 | 100 | − | ||||
Basic information
| Material | Ultrafine Particulate Carbide |
|---|
Configure
Basic Attributes
-
Shank Diameter d(mm)
- 4
- 6
- 8
- 10
- 12
- 16
-
Overall Length L(mm)
-
Processing Applications
- Boss Hole Drilling
- Flank / Groove Processing
-
#2
-
#3
-
#4
-
#5
-
#6
-
#7
-
F
- F
-
T
- T
-
Type
- BSCARM
- LS-BSCARM
- LS-SCARM
- SCARM
Filter by standard shipping days
-
- All
- 7 Days or Less
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.