TSC series carbide roughing end mill, fine pitch / long regular model (TSC-LS-RFPR14)

Click on this image to zoom in.

Volume Discount

MISUMI

Product Details:

Manufacturer part number: TSC-LS-RFPR14

Brand: MISUMI

Price: 99.83 €

Delivery time: 5 Days

Technical Data:

Outer Diameter (D): 14 φ

Flute Length (ℓ): 35 mm

Number of Flutes: 4 sheet

Shank Diameter (d): 12 mm

Overall Length (L): 125 mm

TS
General Steel
R (Regular)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

TSC-LS-RFPR14

Drawing
Part Numbers
Specification and price
Features and examples

TSC series carbide roughing end mill, fine pitch / long regular model:Related Image

Data to be displayed: 30; 45; 60

Part Number
TSC-LS-RFPR14

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Outer Diameter (D) (φ)	Flute Length (ℓ) (mm)	Number of Flutes (sheet)	Shank Diameter (d) (mm)	Overall Length (L) (mm)	Length Under Neck (ℓ1) (mm)	Processing Applications	Additional Classification	Figure	● Inventory Product □ Manufacturer Product
	99.83 €	1	Available	5 Days	14	35	4	12	125	-	Flat Surface / Side Surface / Inclined Cutting	Stocked Product	3	●

Specifications

TSC series carbide roughing end mill, fine pitch / long regular model:Related Image

Model Number			Shank Diameter d	Flute Length ℓ	Overall Length L	Number of Flutes	Figure
	Outer Diameter D	Shank Diameter d
	Outer Diameter D	Shank Diameter d
TSC-LS-RFPR	5	—	6	15	100	3	1
	6	—	6	15	100	3	2
	8	—	8	20	100	4	2
	8	6	6	20	100	4	3
	10	—	10	25	100	4	2
	10	8	8	25	100	4	3
	12	—	12	30	125	4	2
	12	10	10	30	100	4	3
	13	—	12	30	125	4	3
	14	—	12	35	125	4	3
	16	—	16	40	125	4	2
	18	—	16	45	125	4	2
	20	—	20	45	150	4	2

[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).

For Cutting Conditions, Refer to >>Click here.

More Information

● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
● It adopts a fine pitch nick that delivers a finish with good surface roughness after machining.
● The long shank models are ideal for machining deep grooves.

Basic information

Work Material	General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy	Model	Roughing	Coating	For High Hardness (Silicone-Based)
Geometry	Ultra-Small R	Torsion Angle (θ)	Weak Helix (15 to 25°)	Tolerance of OD(mm)	±0.06

This page is TSC series carbide roughing end mill, fine pitch / long regular model, part number TSC-LS-RFPR14.
You can find the detail information about specifications and dimensions on part number TSC-LS-RFPR14.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Length Under Neck (ℓ1)(mm)
Clear
Processing Applications
- Flat Surface
- Side Surface
- Groove
- Inclined Cutting
Clear
Type
- SN-TSC-LS-RFPR
- TSC-LS-RFPR
Clear
Outer Diameter (D)(φ)
5

6

8

10

12

13

14

16

18

20
Clear
Flute Length (ℓ)(mm)
15

20

25

30

35

40

45
Clear
Number of Flutes(sheet)
3

4
Clear
Shank Diameter (d)(mm)
6

8

10

12

16

20
Clear
Overall Length (L)(mm)
100

125

150
Clear
Additional Classification
- Standard Neck Relief
- Stocked Product
Clear

Filter by standard shipping days

All

5 Days or Less

8 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
TSC-LS-RFPR12
TSC-LS-RFPR12-10
TSC-LS-RFPR13
TSC-LS-RFPR16
TSC-LS-RFPR18
TSC-LS-RFPR20

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Outer Diameter (D) (φ)	Flute Length (ℓ) (mm)	Number of Flutes (sheet)	Shank Diameter (d) (mm)	Overall Length (L) (mm)	Length Under Neck (ℓ1) (mm)	Processing Applications	Additional Classification	Figure	● Inventory Product □ Manufacturer Product
94.76 €	1	Available	5 Days	12	30	4	12	125	-	Inclined Cutting / Flat Surface / Side Surface	Stocked Product	2	●
132.53 €	1	Available	5 Days	12	30	4	10	100	-	Inclined Cutting / Flat Surface / Side Surface	Stocked Product	2	●
197.13 €	1	Available	5 Days	13	30	4	12	125	-	Inclined Cutting / Flat Surface / Side Surface	Stocked Product	3	●
137.95 €	1	Available	5 Days	16	40	4	16	125	-	Inclined Cutting / Flat Surface / Side Surface	Stocked Product	2	●
203.48 €	1	Available	5 Days	18	45	4	16	125	-	Inclined Cutting / Flat Surface / Side Surface	Stocked Product	2	●
229.15 €	1	Available	5 Days	20	45	4	20	150	-	Inclined Cutting / Flat Surface / Side Surface	Stocked Product	2	●