Pillow Blocks / Cast Iron (Part Numbers - CAD Download)

Click on this image to zoom in.

Volume Discount

This is one of the most typical ball bearing units, and a bearing is built into the robust and integrally structured housing.

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

PDR15

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Accuracy:JIS B 1558
JIS B 1514
JIS B 1559
Bearing Inner Diameter Tolerance: H7 (Clearance Fit)
Only PDRCP, J7 (Transition Fit)
Operating Temperature: -15 ~ +100°C
Grease Fitting Nominal Diameter: 1/4 to 28 UNF (Unified Standard)
Ball bearing moves slightly due to self-aligning function.
For PDRCP, the fit between the main body and the bearing is designed to be slightly tight to maintain transition fit.
If the bearing is skewed upon delivery, insert the shaft or similar into the bearing and adjust the inclination.
The lubrication-free version comes pre-filled with the correct amount of grease, and no lubrication is required for usage under normal conditions.

Component	Material
Housing	EN-JL 1030 Equiv.
Bearing	EN 1.3505 Equiv.
Rubber Seal	Nitrile Rubber (NBR)
Set Screw	EN 1.7220 Equiv.

Specifications

Part Number

PDR15
PDRCP12

Part Number		JIS Nominal	H	L	L₁	A	d₁	d	t	H₁	B	S	Basic Load Rating (kN)		Set Screw			Mass (g)
Type	D	JIS Nominal	H	L	L₁	A	d₁	d	t	H₁	B	S	Cr (Dynamic)	Cor (Static)	M₁	Tightening Torque (N • cm)	Axial Load Capacity (N)	PDR
PDR	12	UCP201	30.2	127	95	38	19	13	15	62	31.0	12.7	12.8	6.6	M6x0.75	392	640	650
	15	UCP202	30.2	127	95	38	19	13	15	62	31.0	12.7	12.8	6.6	M6x0.75	392	640	630
	17	UCP203	30.2	127	95	38	19	13	15	62	31.0	12.7	12.8	6.6	M6x0.75	392	640	620
	20	UCP204	33.3	127	95	38	19	13	15	65	31.0	12.7	12.8	6.6	M6x0.75	490	1280	650
	25	UCP205	36.5	140	105	38	16	13	16	70	34.1	14.3	14.0	7.9	M6x0.75	490	1400	790
	30	UCP206	42.9	165	121	48	21	17	18	83	38.1	15.9	19.6	11.3	M6x0.75	490	1960	1260
	35	UCP207	47.6	167	127	48	21	17	19	94	42.9	17.5	25.9	15.4	M8x1	1180	2590	1590
	40	UCP208	49.2	184	137	54	25	17	19	100	49.2	19	29.3	17.9	M8x1	1180	2930	1920
	45	UCP209	54.0	190	146	54	22	17	20	108	49.2	19	33.0	20.5	M8x1	1180	3300	2190
	50	UCP210	57.2	206	159	60	25	20	22	114	51.6	19	35.5	23.2	M10x1.25	2350	3550	2590

kgf=Nx0.101972

Part Number		H	L	L₁	A	d₁	d	t	H₁	B	S	Basic Load Rating (kN)		Set Screw			Mass (g)
Type	D	H	L	L₁	A	d₁	d	t	H₁	B	S	Cr (Dynamic)	Cor (Static)	M₁	Tightening Torque (N • cm)	Axial Load Capacity (N)	Mass (g)
PDRCP	12	30.2	114	87	25	16	12	12	57	22.0	6	9.55	4.8	M5x0.8	240	476	390
	15	30.2	114	87	25	16	12	12	57	22.0	6	9.55	4.8	M5x0.8	240	476	380
	17	30.2	114	87	25	16	12	12	57	22.0	6	9.55	4.8	M5x0.8	240	476	360
	20	33.3	125	97	27	16	12	13	64	24.7	7	12.8	6.6	M5x0.8	250	1280	480
	25	36.5	130	100	29	16	12	13	70	27.0	7.5	14.0	7.9	M6x0.75	490	1400	590
	30	42.9	156	120	33	21	14	15	83	30.3	8	19.6	11.3	M6x0.75	490	1960	700

kgf=Nx0.101972

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
PDR15

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Shaft Bore Dia. D (mm)	Pillow Type, Category	Mounting Height H (mm)	Basic Load Rating Cr (Dynamic) (N)	Basic Load Rating Cor (Static) (N)
	14.86 €	1	Available	Same day Stock	15	Standard	30.2	12800	6600

Products homepage

Basic information

Unit, Type	Ball Bearing Units	Bearing Unit, Type	Pillow Blocks	Unit Body Material	EN-JL 1030 Equiv.
Bearing Inner Dia. Shape	Set Screw	Material Bearing	EN 1.3505 Equiv.	Surface Treatment	Not Provided

This page is Pillow Blocks / Cast Iron, part number PDR15.
You can find the detail information about specifications and dimensions on part number PDR15.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Stock

- Show only stock items
Clear

Basic Attributes

Type
- PDR
- PDRCP
Clear
Shaft Bore Dia. D(mm)
12

15

17

20

25

30

35

40

45

50
Clear
Pillow Type, Category
- Standard
- Compact
Clear
Mounting Height H(mm)
30.2

33.3

36.5

42.9

47.6

49.2

54

57.2
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

Same day

5 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
PDR12
PDR17
PDR20
PDR25
PDR30
PDR35

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Shaft Bore Dia. D (mm)	Pillow Type, Category	Mounting Height H (mm)	Basic Load Rating Cr (Dynamic) (N)	Basic Load Rating Cor (Static) (N)
14.86 €	1	Available	5 Days	12	Standard	30.2	12800	6600
14.61 €	1	Available	5 Days	17	Standard	30.2	12800	6600
14.22 €	1	Available	Same day Stock	20	Standard	33.3	12800	6600
15.37 €	1	Available	Same day Stock	25	Standard	36.5	14000	7900
21.40 €	1	Available	Same day Stock	30	Standard	42.9	19600	11300
20.02 €	1	Available	5 Days	35	Standard	47.6	25900	15400