Timing belt pulleys / S14M / with flanged pulley / configurable / steel / untreated, burnished (Part Numbers - CAD Download)

View the FAQ (10)

MISUMI

(i)Remark

Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to the Category Toothed Pulleys/Timing Pulleys/Idler Pulleys

Technical Drawing - Toothed Pulleys/Timing Pulleys/Idler Pulleys

High Torque Timing Pulleys/S14M:Related Image

Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More Information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Type	Belt Width		Material*		Surface Treatment
	40mm	60mm	Pulley	Flange Accessory
	S14M400	S14M600
HTPTNF	●	●	EN 1.1191 Equiv.	EN 1.1191 Equiv.	-
HTPMNF	●	●			Black Oxide

* The above material might be changed to the one equivalent to the original.

Further specifications can be found under the tab More Information.

Composition of a Product Code - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Part Number

Pulley Shape

Shaft Bore Specs., I.D.

(Shaft Bore Specs.: H, N, C)

HTPTNF32-S14M400

H40

(Shaft Bore Specs.: G, V, F)

HTPMNF48-S14M600

G70

Z90

J90.0

(Shaft Bore Specs: Y)

HTPTNF56-S14M400

Y80

Q120

R120

S20

T20

Alterations - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Here to the Overview of Options as PDF .

General Information - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Toothed pulley - synchronous pulley - belt pulley - product assortment

Selection details of toothed pulleys/timing pulleys/idler pulleys

- Material: aluminum, steel, stainless steel (stainless steel), plastic

- Coatings: uncoated, burnished, anodized, nickel-plated

- Profile form: 1.5GT, 2GT, 3GT, 5GT, P2M, P3M, P5M, P8M, S2M, S3M, S5M, S8M, S14M, T2.5, T5, T10, AT5, AT10, 5M, 8M, 14M, 8YU, H, L, MXL, XL, PowerGrip GT3: MR2, MR3, MR5

- ISO tolerances: H7

- Belt width (mm): 4, 4.8, 6, 6.4, 7, 7.9, 9, 9.5, 10, 12, 12.7, 15, 18, 19.1, 20, 25, 25.4, 26, 28, 30, 31, 38,1, 40, 50, 50.8, 53, 60, 74, 76.2, 100

- Belt width (inches): 0.19, 0.25, 0.31, 0.37, 0.5, 0.75, 1, 1.5, 2

- Number of teeth: 10 to 72

Description/Basics

The toothed pulley for mechanical engineering is intended for the transmission of force and torque. Timing pulleys enable a gear ratio of speeds through belt pulleys of different sizes. Timing pulleys are more efficient, durable and significantly more maintenance-friendly compared to chain transmissions.

How much torque and load a timing pulley can transmit depends on the width of the belt. The width of the belt must be calculated. It is recommended to ensure the belt is correctly tensioned. MISUMI already offers the suitable idler pulley and return rollers with integrated ball bearings. For design and design help follow this link.

Different profile shapes of the toothed belts and belt pulleys are responsible for the transmission of power. Depending on the positioning accuracy, the applied torque and the conveying weight, MISUMI offers the fitting pulley. Toothed belt drives are generally used in the industry in three areas:
Positioning: Timing pulleys is often used in 3D printers. A toothed pulley with a semi-circular profile (e.g., GT) is often used for the required position accuracy of a 3D printers. The round shape offers the benefit of little play when the direction changes.
Drive: toothed pulleys are also used for high torque. In most cases, a timing pulley with a rounded trapezoidal profile (e.g., S8M) is used. These are particularly well suited for the transmission of high forces, which occur in drives of various applications in order to drive mechanical components.
Conveying: toothed pulleys can also be used for transporting loads. A straight trapezoidal profile is often used for this purpose (e.g., AT). This toothed pulley shape offers a large surface for loading and transmitting of loads.

Which toothed pulley or timing pulley is the right one for your application depends on the respective task of the toothed belt drive. Different toothed disc profiles have proven themselves for each type of application.

Various bore hole shapes and fastening variants are available for shaft mounting. These allow fastening via set screws, keyways and by means of Mecha locks. Fastening via a clamping sleeve has the further advantage that it allows adjusting the alignment continuously. The MISUMI product assortment has these ready-to-install.

Application Examples - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Application example: idler pulley - idler pully toothed with chain tensioner - toothed pulley with chain tensioner

Application example: idler pulley
(1) Idler pulleys, (2) chain tensioner

Application example: return roller - return roller with cantilever pin - synchronous pulley with on-board disc - toothed pulley with on-board disc

Application example: deflection roller
S (1) Toothed pulleys with crimp disc, (2) nut, (3) washer, (4) cantilever shaft, (5) retaining ring

Application example: synchronous pulleys - toothed pulleys with toothed belts - toothed pulley with screw-on clamp

Application example: timing pulleys
(1) Flat head screw, (2) Timing pulley, (3) Timing belt, (4) Screw-on terminal

Application example: toothed belt drives - toothed pulleys with crimp disc - idler pulley with crimp disc - tensioning of the toothed belt

Application example: of toothed belt drives
(1) Toothed belt, (2) driven toothed pulley with crimp disc, (3) idler pulley with crimp disc, (4) driving toothed pulley with crimp disc

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
HTPTNF28-S14M400-A-C[30,50,55]
HTPTNF28-S14M400-A-C[33-45/1]
HTPTNF28-S14M400-A-C[60-70/1]
HTPTNF28-S14M400-A-G[30,50,55]
HTPTNF28-S14M400-A-G[60-70/1]
HTPTNF28-S14M400-A-H[30-70/1]
HTPTNF28-S14M400-A-N[30,50,55]
HTPTNF28-S14M400-A-N[33-45/1]
HTPTNF28-S14M400-A-N[60-70/1]
HTPTNF28-S14M400-A-V[30-66/1]
HTPTNF28-S14M400-A-Y[30-66/1]
HTPTNF28-S14M400-B-C[30,50,55,60]
HTPTNF28-S14M400-B-C[33-45/1]
HTPTNF28-S14M400-B-F[30-56/1]
HTPTNF28-S14M400-B-G[30,50,55,60]
HTPTNF28-S14M400-B-G[33-45/1]
HTPTNF28-S14M400-B-H[30-60/1]
HTPTNF28-S14M400-B-N[30,50,55,60]
HTPTNF28-S14M400-B-N[33-45/1]
HTPTNF28-S14M400-B-V[30-56/1]
HTPTNF28-S14M600-A-C[30,50,55]
HTPTNF28-S14M600-A-C[33-45/1]
HTPTNF28-S14M600-A-C[60-70/1]
HTPTNF28-S14M600-A-G[30,50,55]
HTPTNF28-S14M600-A-G[33-45/1]
HTPTNF28-S14M600-A-G[60-70/1]
HTPTNF28-S14M600-A-H[30-70/1]
HTPTNF28-S14M600-A-N[30,50,55]
HTPTNF28-S14M600-A-N[33-45/1]
HTPTNF28-S14M600-A-N[60-70/1]
HTPTNF28-S14M600-A-V[30-66/1]
HTPTNF28-S14M600-A-Y[30-66/1]
HTPTNF28-S14M600-B-C[30,50,55,60]
HTPTNF28-S14M600-B-C[33-45/1]
HTPTNF28-S14M600-B-F[30-56/1]
HTPTNF28-S14M600-B-G[30,50,55,60]
HTPTNF28-S14M600-B-G[33-45/1]
HTPTNF28-S14M600-B-H[30-60/1]
HTPTNF28-S14M600-B-N[30,50,55,60]
HTPTNF28-S14M600-B-N[33-45/1]
HTPTNF28-S14M600-B-V[30-56/1]
HTPTNF30-S14M400-A-C[30,50,55]
HTPTNF30-S14M400-A-C[33-45/1]
HTPTNF30-S14M400-A-C[60-70/1]
HTPTNF30-S14M400-A-G[30,50,55]
HTPTNF30-S14M400-A-G[33-45/1]
HTPTNF30-S14M400-A-G[60-70/1]
HTPTNF30-S14M400-A-H[30-80/1]
HTPTNF30-S14M400-A-N[30,50,55]
HTPTNF30-S14M400-A-N[33-45/1]
HTPTNF30-S14M400-A-N[60-70/1]
HTPTNF30-S14M400-A-V[30-76/1]
HTPTNF30-S14M400-A-Y[30-76/1]
HTPTNF30-S14M400-B-C[30,50,55]
HTPTNF30-S14M400-B-C[33-45/1]
HTPTNF30-S14M400-B-C[60-70/1]
HTPTNF30-S14M400-B-F[30-66/1]
HTPTNF30-S14M400-B-G[30,50,55]
HTPTNF30-S14M400-B-G[33-45/1]
HTPTNF30-S14M400-B-G[60-70/1]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Belt Width (mm)	[T] Number of Teeth	Pulley Shape	Surface Treatment	C (mm)	F (mm)	G (mm)	H (mm)	N (mm)	V (mm)	Y (mm)
-	1	9 Days	10	40	28	Shape A	Not Provided	30 ～ 55	-	-	-	-	-	-
-	1	9 Days	10	40	28	Shape A	Not Provided	33 ～ 45	-	-	-	-	-	-
-	1	9 Days	10	40	28	Shape A	Not Provided	60 ～ 70	-	-	-	-	-	-
-	1	9 Days	10	40	28	Shape A	Not Provided	-	-	30 ～ 55	-	-	-	-
-	1	9 Days	10	40	28	Shape A	Not Provided	-	-	60 ～ 70	-	-	-	-
-	1	9 Days	10	40	28	Shape A	Not Provided	-	-	-	30 ～ 70	-	-	-
-	1	9 Days	10	40	28	Shape A	Not Provided	-	-	-	-	30 ～ 55	-	-
-	1	9 Days	10	40	28	Shape A	Not Provided	-	-	-	-	33 ～ 45	-	-
-	1	9 Days	10	40	28	Shape A	Not Provided	-	-	-	-	60 ～ 70	-	-
-	1	9 Days	10	40	28	Shape A	Not Provided	-	-	-	-	-	30 ～ 66	-
-	1	9 Days	10	40	28	Shape A	Not Provided	-	-	-	-	-	-	30 ～ 66
-	1	9 Days	10	40	28	Shape B	Not Provided	30 ～ 60	-	-	-	-	-	-
-	1	9 Days	10	40	28	Shape B	Not Provided	33 ～ 45	-	-	-	-	-	-
-	1	9 Days	10	40	28	Shape B	Not Provided	-	30 ～ 56	-	-	-	-	-
-	1	9 Days	10	40	28	Shape B	Not Provided	-	-	30 ～ 60	-	-	-	-
-	1	9 Days	10	40	28	Shape B	Not Provided	-	-	33 ～ 45	-	-	-	-
-	1	9 Days	10	40	28	Shape B	Not Provided	-	-	-	30 ～ 60	-	-	-
-	1	9 Days	10	40	28	Shape B	Not Provided	-	-	-	-	30 ～ 60	-	-
-	1	9 Days	10	40	28	Shape B	Not Provided	-	-	-	-	33 ～ 45	-	-
-	1	9 Days	10	40	28	Shape B	Not Provided	-	-	-	-	-	30 ～ 56	-
-	1	9 Days	10	60	28	Shape A	Not Provided	30 ～ 55	-	-	-	-	-	-
-	1	9 Days	10	60	28	Shape A	Not Provided	33 ～ 45	-	-	-	-	-	-
-	1	9 Days	10	60	28	Shape A	Not Provided	60 ～ 70	-	-	-	-	-	-
-	1	9 Days	10	60	28	Shape A	Not Provided	-	-	30 ～ 55	-	-	-	-
-	1	9 Days	10	60	28	Shape A	Not Provided	-	-	33 ～ 45	-	-	-	-
-	1	9 Days	10	60	28	Shape A	Not Provided	-	-	60 ～ 70	-	-	-	-
-	1	9 Days	10	60	28	Shape A	Not Provided	-	-	-	30 ～ 70	-	-	-
-	1	9 Days	10	60	28	Shape A	Not Provided	-	-	-	-	30 ～ 55	-	-
-	1	9 Days	10	60	28	Shape A	Not Provided	-	-	-	-	33 ～ 45	-	-
-	1	9 Days	10	60	28	Shape A	Not Provided	-	-	-	-	60 ～ 70	-	-
-	1	9 Days	10	60	28	Shape A	Not Provided	-	-	-	-	-	30 ～ 66	-
-	1	9 Days	10	60	28	Shape A	Not Provided	-	-	-	-	-	-	30 ～ 66
-	1	9 Days	10	60	28	Shape B	Not Provided	30 ～ 60	-	-	-	-	-	-
-	1	9 Days	10	60	28	Shape B	Not Provided	33 ～ 45	-	-	-	-	-	-
-	1	9 Days	10	60	28	Shape B	Not Provided	-	30 ～ 56	-	-	-	-	-
-	1	9 Days	10	60	28	Shape B	Not Provided	-	-	30 ～ 60	-	-	-	-
-	1	9 Days	10	60	28	Shape B	Not Provided	-	-	33 ～ 45	-	-	-	-
-	1	9 Days	10	60	28	Shape B	Not Provided	-	-	-	30 ～ 60	-	-	-
-	1	9 Days	10	60	28	Shape B	Not Provided	-	-	-	-	30 ～ 60	-	-
-	1	9 Days	10	60	28	Shape B	Not Provided	-	-	-	-	33 ～ 45	-	-
-	1	9 Days	10	60	28	Shape B	Not Provided	-	-	-	-	-	30 ～ 56	-
-	1	9 Days	10	40	30	Shape A	Not Provided	30 ～ 55	-	-	-	-	-	-
-	1	9 Days	10	40	30	Shape A	Not Provided	33 ～ 45	-	-	-	-	-	-
-	1	9 Days	10	40	30	Shape A	Not Provided	60 ～ 70	-	-	-	-	-	-
-	1	9 Days	10	40	30	Shape A	Not Provided	-	-	30 ～ 55	-	-	-	-
-	1	9 Days	10	40	30	Shape A	Not Provided	-	-	33 ～ 45	-	-	-	-
-	1	9 Days	10	40	30	Shape A	Not Provided	-	-	60 ～ 70	-	-	-	-
-	1	9 Days	10	40	30	Shape A	Not Provided	-	-	-	30 ～ 80	-	-	-
-	1	9 Days	10	40	30	Shape A	Not Provided	-	-	-	-	30 ～ 55	-	-
-	1	9 Days	10	40	30	Shape A	Not Provided	-	-	-	-	33 ～ 45	-	-
-	1	9 Days	10	40	30	Shape A	Not Provided	-	-	-	-	60 ～ 70	-	-
-	1	9 Days	10	40	30	Shape A	Not Provided	-	-	-	-	-	30 ～ 76	-
-	1	9 Days	10	40	30	Shape A	Not Provided	-	-	-	-	-	-	30 ～ 76
-	1	9 Days	10	40	30	Shape B	Not Provided	30 ～ 55	-	-	-	-	-	-
-	1	9 Days	10	40	30	Shape B	Not Provided	33 ～ 45	-	-	-	-	-	-
-	1	9 Days	10	40	30	Shape B	Not Provided	60 ～ 70	-	-	-	-	-	-
-	1	9 Days	10	40	30	Shape B	Not Provided	-	30 ～ 66	-	-	-	-	-
-	1	9 Days	10	40	30	Shape B	Not Provided	-	-	30 ～ 55	-	-	-	-
-	1	9 Days	10	40	30	Shape B	Not Provided	-	-	33 ～ 45	-	-	-	-
-	1	9 Days	10	40	30	Shape B	Not Provided	-	-	60 ～ 70	-	-	-	-

1
2
3
4
5
Next >>

Back to the Category Toothed Pulleys/Timing Pulleys/Idler Pulleys

Technical Drawing - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Open the technical drawing in the new window

Specification Tables - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Codice componente

Profilo
puleggia

Profilo puleggia

Tipo

N. denti

Largh. nom.
tipo

Specifiche foro albero (~): Specificare in incrementi di 1mm (, ): Selezionare

H
Foro rotondo

N, C, G
Sede chiavetta
* Per ordini di G, specificare le dim. Z, J (Profilo A, foro albero V, R)

V
Foro con gradino

Y
Gradino sui due lati

H
Foro rotondo

N, C, G
Sede chiavetta
* Per ordini di G, specificare le dim. Z, J (Profilo A, foro albero V, R)

V, F
Foro con gradino

Z
Z-d≥2

J
(Incrementi di 0.1mm)

Q, R
Q(R)-d≥2

S, T

V, F

Z
Z-d≥2

J
(Incrementi di 0.1mm)

Acciaio
HTPTNF

HTPMNF

S14M400

S14M600

A

B

30~70

30~66

30~70

5.0≤J≤W-5.0

30~66

35~75

5~23
S+T≤W-5

30~60

30~56

30~60

5.0≤J≤L-5.0

30~80

30~70

30~76

30~80

30~76

35~85

30~70

30~66

30~70

30~85

30~70

30~81

30~85

30~81

35~90

30~75

30~70

30~71

30~75

30~90

30~70

30~86

30~90

30~86

35~95

30~85

30~70

30~81

30~85

30~95

30~70

30~91

30~95

30~91

35~100

30~85

30~70

30~81

30~85

35~105

35~70

35~101

35~105

35~101

40~110

35~95

35~70

35~91

35~95

35~110

35~70

35~106

35~110

35~106

40~115

35~100

35~70

35~96

35~100

35~115

35~70

35~111

35~115

35~111

40~120

35~100

35~70

35~96

35~100

40~120

40~70

40~116

40~120

40~116

45~125

40~110

40~70

40~106

40~110

40~130

40~70

40~126

40~130

40~126

45~135

40~110

40~70

40~106

40~110

40~150

40~70

40~146

40~150

40~146

45~155

40~110

40~70

40~106

40~110

Diam. foro albero 31, 32, 46 ~ 49, 51 ~ 54 o 56 ~ 59 non disponibili per spec. foro albero N, C e G.
Quando Z≤d+ altezza chiavetta per specifica foro albero G, viene aggiunta una sede chiavetta alla parte con dimensione Z.

Alterations - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Here to the Option Overview PDF

Products homepage

Basic information

Type	Timing Pulleys	Belt Type	S14M	Material	EN 1.1191 Equiv.
Timing Pulleys/Idlers	Pulleys

Configure

521Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Belt Width(mm)
40

60
Clear
[T] Number of Teeth
28

30

32

34

36

40

42

44

48

50

56
Clear
Pulley Shape
- Shape A
- Shape B
Clear
C(mm)
30

50

55

60
[33-45/1mm Unit(s)][60-70/1mm Unit(s)]
Clear
F(mm)
[30-106/1mm Unit(s)]
Clear
G(mm)
30

50

55

60
[33-45/1mm Unit(s)][60-70/1mm Unit(s)]
Clear
H(mm)
[30-150/1mm Unit(s)]
Clear
N(mm)
30

50

55

60
[33-45/1mm Unit(s)][60-70/1mm Unit(s)]
Clear
V(mm)
[30-146/1mm Unit(s)]
Clear
Y(mm)
[30-146/1mm Unit(s)]
Clear
Type
- HTPMNF□□-S14M
- HTPTNF□□-S14M
Clear
Surface Treatment
- Not Provided
- Black Oxide
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

9 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently Asked Questions (FAQ)

Question:
Do you have any belt pulleys without a hole?: Answer:
The MISUMI toothed pulleys always have a pilot bore. It is expanded depending on your configuration. It provides the advantage that the belt pulleys are already provided with a suitable shaft bore ready for installation. Therefore, it does not require time-consuming post-processing.
Question:
Do you have timing pulleys made of aluminum?: Answer:
The MISUMI online shop also offers timing pulleys or toothed pulleys in aluminum. Furthermore, we are also offering belt pulleys in steel and stainless steel. The return rollers and idler pulleys for the timing belts are also available in plastic.
Question:
Is a transmission with toothed belt pulleys possible?: Answer:
With toothed pulleys, a gear ratio is possible in a drive. The gear ratio is established based on the number of teeth on the belt pulleys. It should be ensured that the minimum number of teeth of the timing pulley disc is not undercut.
Question:
Which type of the toothed belt pulley can be clamped during assembly?: Answer:
There are a number of ways to install timing pulleys on a shaft. For applications that are not exposed to high torque, such as conveyors, it can be sufficient to fasten a timing pulley using clamping threaded pins. For this purpose, the shaft should have a flat surface.
For higher loads, a toothed pulley with a keyway can also be used.
A further variant is the fastening of a timing pulley via a conical chip sleeve. Depending on the type of Mecha lock, the timing pulley requires lateral internal threads, which can be added through additional options in the MISUMI online shop.
A timing pulley with a bore hole can also be combined with a Mech lock. MISUMI is offering this combination as a set.
Question:
Where do you position the tension roller?: Answer:
If an idler pulley should be utilised, it should be positioned on the sag side. This means that the idler pulley is attached to the side not subjected to pull.
Ideally, a toothed idler pulley is mounted on the inside of the toothed belt. The tensioning roller should always be larger than the smallest toothed idler pulley of the belt drive system.
If an idler pulley must tension the toothed belt from the outside, then a non-toothed (flat) idler pulley should be used. Cantilever pins, which MISUMI offers in various geometric versions, are suitable for fastening.
Question:
Which parallel key can be used for the toothed pulleys?: Answer:
The parallel key size is based on the shaft diameter. In this case, it is recommended using the MISUMI parallel keys, as they fit better when MISUMI toothed pulleys are used. See Overview available as PDF for keyway tolerances.
Question:
Is a timing pulley with a round profile better?: Answer:
Timing pulleys and round-profile timing belts are not recommended for every application. For example, the round profile shape is well suited for applications that require high positioning accuracy. Therefore, they are often used in 3D printers and scanners. Compared to other profile shapes, the round profile shape has a higher wear resistance. Another advantage of the round profile shape is the minimized play in the return (reverse play).
Question:
Which belt pulley is suitable for Gates toothed belts?: Answer:
The GT and EV timing pulleys are suitable for Gates’ toothed belts. However, these require you put attention to the slope (distance of the teeth) of the toothed belt. It must be checked whether these correspond to the selected toothed pulley.
Question:
Are the curtain discs necessary for the toothed pulleys?: Answer:
It is recommended using the smaller belt pulleys particularly with curb disc. The curb disk ensures that the toothed belt does not migrate down from the toothed belt pulley. Even with the smallest misalignment of a pulley, there may be a risk that the toothed belt will move and jump during operation.
Question:
How is the gearing of the toothed pulleys manufactured?: Answer:
The gear teeth of the MISUMI toothed belt pulley are mainly pushed. This ensures high manufacturing accuracy. As a result, the teeth fit precisely into the toothed belt profile of the timing belts and ensure optimal power and torque transmission.