Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!

Strona główna MISUMI
Automation Components
Rotary Power Transmission
Shaft Couplings
Shaft Couplings
Oldham couplings / grub screw clamping, feather key / 1 disc: CFK / body: stainless steel

Warunki filtrowania

Allowable Torque Range(N•m)
Shaft Bore Dia. 1 d1 (or d)(mm)
- 4
- 5
- 6
- 6.35
- 7
- 8
- 9.53
- 10
- 11
- 12
- 14
- 15
- 16
- 18
- 20
Shaft Bore Dia. 2 d2 (or d)(mm)
- 4
- 5
- 6
- 6.35
- 7
- 8
- 9.53
- 10
- 11
- 12
- 14
- 15
- 16
- 18
- 20
O.D. D(mm)
- 14.5
- 16.8
- 20
- 26
- 30
- 34
- 38
Overall Length(mm)
- 18.4
- 24.4
- 27.2
- 30.4
- 33
- 34
- 40
Allowable Torque(Nm)
Calculation of the allowable torque (or the Safety Factor, etc.) differs depending on the manufacturer. For details, see the technical data provided by the relevant manufacturer.
- 1.6
- 2.2
- 3.2
- 6
- 15
- 16
- 28
Max. Rotational Speed(r/min)
- 5800
- 6000
- 6200
- 6500
- 8000
- 10000
Allowable Lateral Misalignment Range(mm)
- 0.41 to 1.0
- 1.1 to 3.0
Allowable Lateral Misalignment(mm)
- 0.8
- 1
- 1.5
- 2
- 2.5
Shaft Bore Shape
Shaft I.D. d1 Change Hole Dia. [LDC] Specified in 0.1mm Increment
[4.1–20/0.1]
Shaft I.D. d2 Change Hole Dia. [RDC] Specified in 0.1mm Increment
[4.1–20/0.1]
Type
CAD
- 2D
- 3D
Szacowane dni wysyłki
- Wszystko
- W ciągu 7 dni robocze

MISUMI

Oldham couplings / grub screw clamping, feather key / 1 disc: CFK / body: stainless steel

Umieść kursor myszy nad ilustracją, aby ją powiększyć

KatalogS. 1-1088

Numer części:

Znaleziono następującą liczbę niepotwierdzonych proponowanych produktów: 104.

Rysunek konturowy i tabela specyfikacji
Lista numerów części
Szczegółowe informacje
Katalog

Rysunek konturowy i tabela specyfikacji

Dimensional Drawing

MCOC (Standard Bore)

MCOCLK (Keywayed Bore d₁)
MCOCRK (Keywayed Bore d₂)
MCOCWK (Keywayed Bore d₁, d₂)

d₁ side

d₂ side

[!] Operating Temperature: －40°C to 90°C
[ ! ] Tolerances for d₁ and d₂ are values before slit machining.
[ ! ] Recommended Fit Tolerance of Applicable Shaft Diameter: h8.
[ ! ] The lateral, angular, and axial misalignment values shown are for each occurring individually. When multiple misalignments are occurring simultaneously, the allowable maximum value of each will be reduced to 1/2.

Standard Bore	Keywayed Bore			[M] Material			[S] Surface Treatment
Standard Bore	d₁ (One Side)	d₂ (One Side)	d₁, d₂ (Both Sides)	Hub	Spacer	Hex Socket Head Cap Screw	Hex Socket Head Cap Screw
MCOC	MCOCLK	MCOCRK	MCOCWK	EN 1.4301 Equiv. (Sintered)	Carbon Reinforced Resin	EN 1.7220 Equiv.	Black Oxide Film

Specification Table

Part Number	—	Shaft Bore Dia. d₁	—	Shaft Bore Dia. d₂
MCOC20	—	6	—	6
MCOCLK20	—	6	—	8
MCOCWK20	—	8	—	10

Part Number		d₁, d₂ Selection (However, d₁ ≤ d₂) [ ! ] Hole Dia. 6 or more is available for Keywayed Bore															D	D₁	D₂	d₃	L	ℓ	A	F	Clamp Screw
Type	No.																D	D₁	D₂	d₃	L	ℓ	A	F	M	Tightening Torque (N⋅m)
MCOC MCOCLK MCOCRK MCOCWK	15	4	5	6													14.5	15	16	5.0	18.4	6.6	4.5	3.2	M2.5	1.0
	17		5	6	6.35												16.8	17.5	19	7.2	24.4	9	5	4	M3	1.8
	20			6	6.35	7	8	9.53	10								20	21	23	8.2	27.2	10	7	4.5	M3	1.8
	26			6	6.35	7	8	9.53	10	11	12						26	27	29	12.0	30.4	11.5	8.4	5	M4	3.0
	30						8		10								30	31	32	13.0	33	12	8.5	6	M5	8.0
	30										12	14					30	31	32	13.0	33	12	9	6	M4	4.5
	34								10	11	12	14	15	16			34	35	37	13.0	34	13	11	6	M5	8.0*
	38								10		12	14	15	16			38	41	41	16.0	40	15	11.5	7	M5	8.0
	38														18	20	38	41	41	16.0	40	15	13.7	7	M5	8.0

[ ! ] *Clamping screw tightening torque for shaft diameter 16 (d₁, d₂) of MCOC34 is 5.4 (N⋅m).

Part Number		Allowable Torque (N⋅m)	Allowable Angular Misalignment (°)	Allowable Lateral Misalignment (mm)	Static Torsional Spring Constant (N·m/rad)	Max. Rotational Speed (r/min)	Moment of Inertia (kg⋅m²)	Allowable Axial Misalignment (mm)	Mass (g)
Type	No.	Allowable Torque (N⋅m)	Allowable Angular Misalignment (°)	Allowable Lateral Misalignment (mm)	Static Torsional Spring Constant (N·m/rad)	Max. Rotational Speed (r/min)	Moment of Inertia (kg⋅m²)	Allowable Axial Misalignment (mm)	Mass (g)
MCOC MCOCLK MCOCRK MCOCWK	15	1.6	3	0.8	90	10000	5.0 × 10⁻⁷	±0.45	15
	17	2.2		1	250	10000	1.0 × 10⁻⁶	±0.55	28
	20	3.2		1.5	340	8000	2.4 × 10⁻⁶	±0.6	40
	26	6		2	420	6500	8.0 × 10⁻⁶		85
	30	15		2	1200	6200	2.0 × 10⁻⁵		100
	34	16		2.5	2400	6000	2.5 × 10⁻⁵		155
	38	28		2.5	3500	5800	8.0 × 10⁻⁵		240

[!] The allowable torque varies depending on temperature.

Keyway Dimension

Shaft bore diameter d₁, d₂	b		t		Key Nominal Dim. (b x h)
Shaft bore diameter d₁, d₂	Standard Dimensions	Tolerance	Standard Dimensions	Tolerance	Key Nominal Dim. (b x h)
6 to 7.9	2	±0.0125	1.0	+0.10 0	2 × 2
8 to 10	3	±0.0125	1.4		3 × 3
10.1 to 12	4	±0.015	1.8		4 × 4
12.1 to 17	5		2.3		5 × 5
17.1 to 22	6		2.8		6 × 6
22.1 to 30	8	±0.018	3.3	+0.20 0	8 × 7
30.1 to 32	10	±0.018	3.3	+0.20 0	10 × 8

Alteration:

Alterations

Shaft Bore Dia.

Keyway Width

Spec.

Keyway Width (b) is changed as the table below.
Ordering Code KLH4 KRH4

Shaft bore diameter d1, d2	KLH·KRH (b)		t
Shaft bore diameter d1, d2	Reference Dim.	Tolerance	Reference Dim.	Tolerance
8	2	±0.0125	1	+0.1 0
10	4	±0.0150	1.8
12	5	±0.0150	2.3

0.1 mm Increments
Ordering Code
LDC7.8
RDC9.3

No.	D	LDC·RDC
15	14.5	4 to 6
17	16.8	5 to 6.3
20	20	6 to 10
26	26	6 to 12
30	30	8 to 14
34	34	10 to 16
38	38	10 to 20

[ NG ] Cannot be combined with shaft bore change (LDC, RDC) alterations.
[ ! ] Applicable to Keywayed Bore only

Code

LDC (Left Shaft)

RDC (Right Shaft)

KLH (Left Shaft)

KRH (Right Shaft)

Lista numerów części

Liczba pozycji

Dalej

Numer części

MCOC15-[4,5,6]-[4,5,6]

MCOC15-[4,5,6]-RDC[4.1-6/0.1]

MCOC15-LDC[4.1-6/0.1]-[4,5,6]

MCOC15-LDC[4.1-6/0.1]-RDC[4.1-6/0.1]

MCOC17-[5,6,6.35]-[5,6,6.35]

MCOC17-[5,6,6.35]-RDC[5.1-6.3/0.1]

MCOC17-LDC[5.1-6.3/0.1]-[5,6,6.35]

MCOC17-LDC[5.1-6.3/0.1]-RDC[5.1-6.3/0.1]

MCOC20-[6,6.35,7,8,9.53,10]-[6,6.35,7,8,9.53,10]

MCOC20-[6,6.35,7,8,9.53,10]-RDC[6.1-10/0.1]

MCOC20-LDC[6.1-10/0.1]-[6,6.35,7,8,9.53,10]

MCOC20-LDC[6.1-10/0.1]-RDC[6.1-10/0.1]

MCOC26-[6,6.35,7,8,9.53,10,11,12]-[6,6.35,7,8,9.53,10,11,12]

MCOC26-[6,6.35,7,8,9.53,10,11,12]-RDC[6.1-12/0.1]

MCOC26-LDC[6.1-12/0.1]-[6,6.35,7,8,9.53,10,11,12]

MCOC26-LDC[6.1-12/0.1]-RDC[6.1-12/0.1]

MCOC30-[8,10,12,14]-[8,10,12,14]

MCOC30-[8,10,12,14]-RDC[8.1-14/0.1]

MCOC30-LDC[8.1-14/0.1]-[8,10,12,14]

MCOC30-LDC[8.1-14/0.1]-RDC[8.1-14/0.1]

MCOC34-[10,11,12,14,15,16]-[10,11,12,14,15,16]

MCOC34-[10,11,12,14,15,16]-RDC[10.1-16/0.1]

MCOC34-LDC[10.1-16/0.1]-[10,11,12,14,15,16]

MCOC34-LDC[10.1-16/0.1]-RDC[10.1-16/0.1]

MCOC38-[10,12,14,15,16,18,20]-[10,12,14,15,16,18,20]

MCOC38-[10,12,14,15,16,18,20]-RDC[10.1-19.9/0.1]

MCOC38-LDC[10.1-19.9/0.1]-[10,12,14,15,16,18,20]

MCOC38-LDC[10.1-19.9/0.1]-RDC[10.1-19.9/0.1]

MCOCLK15-6-6

MCOCLK17-[6,6.35]-[6,6.35]

MCOCLK17-[6,6.35]-RDC[6.1-6.3/0.1]

MCOCLK17-LDC[6.1-6.3/0.1]-[6,6.35]

MCOCLK17-LDC[6.1-6.3/0.1]-RDC[6.1-6.3/0.1]

MCOCLK20-[6,6.35,7,8,9.53,10]-[6,6.35,7,8,9.53,10]

MCOCLK20-[6,6.35,7,8,9.53,10]-RDC[6.1-10/0.1]

MCOCLK20-LDC[6.1-10/0.1]-[6,6.35,7,8,9.53,10]

MCOCLK20-LDC[6.1-10/0.1]-RDC[6.1-10/0.1]

MCOCLK26-[6,6.35,7,8,9.53,10,11,12]-[6,6.35,7,8,9.53,10,11,12]

MCOCLK26-[6,6.35,7,8,9.53,10,11,12]-RDC[6.1-12/0.1]

MCOCLK26-LDC[6.1-12/0.1]-[6,6.35,7,8,9.53,10,11,12]

MCOCLK26-LDC[6.1-12/0.1]-RDC[6.1-12/0.1]

MCOCLK30-[8,10,12,14]-[8,10,12,14]

MCOCLK30-[8,10,12,14]-RDC[8.1-14/0.1]

MCOCLK30-LDC[8.1-14/0.1]-[8,10,12,14]

MCOCLK30-LDC[8.1-14/0.1]-RDC[8.1-14/0.1]

MCOCLK34-[10,11,12,14,15,16]-[10,11,12,14,15,16]

MCOCLK34-[10,11,12,14,15,16]-RDC[10.1-18/0.1]

MCOCLK34-LDC[10.1-18/0.1]-[10,11,12,14,15,16]

MCOCLK34-LDC[10.1-18/0.1]-RDC[10.1-18/0.1]

MCOCLK38-[10,12,14,15,16,18,20]-[10,12,14,15,16,18,20]

MCOCLK38-[10,12,14,15,16,18,20]-RDC[10.1-20/0.1]

MCOCLK38-LDC[10.1-20/0.1]-[10,12,14,15,16,18,20]

MCOCLK38-LDC[10.1-20/0.1]-RDC[10.1-20/0.1]

MCOCRK15-[4,5,6]-6

MCOCRK15-LDC[4.1-6/0.1]-6

MCOCRK17-[6,6.35]-[6,6.35]

MCOCRK17-[6,6.35]-RDC[6.1-6.3/0.1]

MCOCRK17-LDC[6.1-6.3/0.1]-[6,6.35]

MCOCRK17-LDC[6.1-6.3/0.1]-RDC[6.1-6.3/0.1]

MCOCRK20-[6,6.35,7,8,9.53,10]-[6,6.35,7,8,9.53,10]

Allowable Torque Range

(N•m)

Shaft Bore Dia. 1 d1 (or d)

(mm)

Shaft Bore Dia. 2 d2 (or d)

(mm)

O.D. D

(mm)

Overall Length

(mm)

Allowable Torque

(Nm)

Max. Rotational Speed

(r/min)

Allowable Lateral Misalignment Range

(mm)

Allowable Lateral Misalignment

(mm)

Allowable Axial Misalignment

(mm)

Moment of Inertia

(kg･m²)

Shaft Bore Shape

Shaft I.D. d1 Change Hole Dia. [LDC] Specified in 0.1mm Increment

Shaft I.D. d2 Change Hole Dia. [RDC] Specified in 0.1mm Increment

RoHS?

Minimalna wielkość zamówienia

1.01 to 3.00	4 - 6	4 - 6	14.5	18.4	1.6	10000	0.41 to 1.0	0.8	+0.45/-0.45	5.0x10^-7	Standard Holes	-	-	10	1 szt.
1.01 to 3.00	4 - 6	-	14.5	18.4	1.6	10000	0.41 to 1.0	0.8	+0.45/-0.45	5.0x10^-7	Standard Holes	-	4.1 - 6	10	1 szt.
1.01 to 3.00	-	4 - 6	14.5	18.4	1.6	10000	0.41 to 1.0	0.8	+0.45/-0.45	5.0x10^-7	Standard Holes	4.1 - 6	-	10	1 szt.
1.01 to 3.00	-	-	14.5	18.4	1.6	10000	0.41 to 1.0	0.8	+0.45/-0.45	5.0x10^-7	Standard Holes	4.1 - 6	4.1 - 6	10	1 szt.
1.01 to 3.00	5 - 6.35	5 - 6.35	16.8	24.4	2.2	10000	0.41 to 1.0	1	+0.55/-0.55	1.0x10^-6	Standard Holes	-	-	10	1 szt.
1.01 to 3.00	5 - 6.35	-	16.8	24.4	2.2	10000	0.41 to 1.0	1	+0.55/-0.55	1.0x10^-6	Standard Holes	-	5.1 - 6.3	10	1 szt.
1.01 to 3.00	-	5 - 6.35	16.8	24.4	2.2	10000	0.41 to 1.0	1	+0.55/-0.55	1.0x10^-6	Standard Holes	5.1 - 6.3	-	10	1 szt.
1.01 to 3.00	-	-	16.8	24.4	2.2	10000	0.41 to 1.0	1	+0.55/-0.55	1.0x10^-6	Standard Holes	5.1 - 6.3	5.1 - 6.3	10	1 szt.
3.01 to 5.00	6 - 10	6 - 10	20	27.2	3.2	8000	1.1 to 3.0	1.5	+0.6/-0.6	2.4x10^-6	Standard Holes	-	-	10	1 szt.
3.01 to 5.00	6 - 10	-	20	27.2	3.2	8000	1.1 to 3.0	1.5	+0.6/-0.6	2.4x10^-6	Standard Holes	-	6.1 - 10	10	1 szt.
3.01 to 5.00	-	6 - 10	20	27.2	3.2	8000	1.1 to 3.0	1.5	+0.6/-0.6	2.4x10^-6	Standard Holes	6.1 - 10	-	10	1 szt.
3.01 to 5.00	-	-	20	27.2	3.2	8000	1.1 to 3.0	1.5	+0.6/-0.6	2.4x10^-6	Standard Holes	6.1 - 10	6.1 - 10	10	1 szt.
5.01 to 10.00	6 - 12	6 - 12	26	30.4	6	6500	1.1 to 3.0	2	+0.6/-0.6	8.0x10^-6	Standard Holes	-	-	10	1 szt.
5.01 to 10.00	6 - 12	-	26	30.4	6	6500	1.1 to 3.0	2	+0.6/-0.6	8.0x10^-6	Standard Holes	-	6.1 - 12	10	1 szt.
5.01 to 10.00	-	6 - 12	26	30.4	6	6500	1.1 to 3.0	2	+0.6/-0.6	8.0x10^-6	Standard Holes	6.1 - 12	-	10	1 szt.
5.01 to 10.00	-	-	26	30.4	6	6500	1.1 to 3.0	2	+0.6/-0.6	8.0x10^-6	Standard Holes	6.1 - 12	6.1 - 12	10	1 szt.
10.01 to 20.00	8 - 14	8 - 14	30	33	15	6200	1.1 to 3.0	2	+0.6/-0.6	2.0x10^-5	Standard Holes	-	-	10	1 szt.
10.01 to 20.00	8 - 14	-	30	33	15	6200	1.1 to 3.0	2	+0.6/-0.6	2.0x10^-5	Standard Holes	-	8.1 - 14	10	1 szt.
10.01 to 20.00	-	8 - 14	30	33	15	6200	1.1 to 3.0	2	+0.6/-0.6	2.0x10^-5	Standard Holes	8.1 - 14	-	10	1 szt.
10.01 to 20.00	-	-	30	33	15	6200	1.1 to 3.0	2	+0.6/-0.6	2.0x10^-5	Standard Holes	8.1 - 14	8.1 - 14	10	1 szt.
10.01 to 20.00	10 - 16	10 - 16	34	34	16	6000	1.1 to 3.0	2.5	+0.6/-0.6	2.5x10^-5	Standard Holes	-	-	10	1 szt.
10.01 to 20.00	10 - 16	-	34	34	16	6000	1.1 to 3.0	2.5	+0.6/-0.6	2.5x10^-5	Standard Holes	-	10.1 - 16	10	1 szt.
10.01 to 20.00	-	10 - 16	34	34	16	6000	1.1 to 3.0	2.5	+0.6/-0.6	2.5x10^-5	Standard Holes	10.1 - 16	-	10	1 szt.
10.01 to 20.00	-	-	34	34	16	6000	1.1 to 3.0	2.5	+0.6/-0.6	2.5x10^-5	Standard Holes	10.1 - 16	10.1 - 16	10	1 szt.
20.01 to 50.00	10 - 20	10 - 20	38	40	28	5800	1.1 to 3.0	2.5	+0.6/-0.6	8.0x10^-5	Standard Holes	-	-	10	1 szt.
20.01 to 50.00	10 - 20	-	38	40	28	5800	1.1 to 3.0	2.5	+0.6/-0.6	8.0x10^-5	Standard Holes	-	10.1 - 19.9	10	1 szt.
20.01 to 50.00	-	10 - 20	38	40	28	5800	1.1 to 3.0	2.5	+0.6/-0.6	8.0x10^-5	Standard Holes	10.1 - 19.9	-	10	1 szt.
20.01 to 50.00	-	-	38	40	28	5800	1.1 to 3.0	2.5	+0.6/-0.6	8.0x10^-5	Standard Holes	10.1 - 19.9	10.1 - 19.9	10	1 szt.
1.01 to 3.00	6	6	14.5	18.4	1.6	10000	0.41 to 1.0	0.8	+0.45/-0.45	5.0x10^-7	Hole with Keyway d1 Side	-	-	10	1 szt.
1.01 to 3.00	6 - 6.35	6 - 6.35	16.8	24.4	2.2	10000	0.41 to 1.0	1	+0.55/-0.55	1.0x10^-6	Hole with Keyway d1 Side	-	-	10	1 szt.
1.01 to 3.00	6 - 6.35	-	16.8	24.4	2.2	10000	0.41 to 1.0	1	+0.55/-0.55	1.0x10^-6	Hole with Keyway d1 Side	-	6.1 - 6.3	10	1 szt.
1.01 to 3.00	-	6 - 6.35	16.8	24.4	2.2	10000	0.41 to 1.0	1	+0.55/-0.55	1.0x10^-6	Hole with Keyway d1 Side	6.1 - 6.3	-	10	1 szt.
1.01 to 3.00	-	-	16.8	24.4	2.2	10000	0.41 to 1.0	1	+0.55/-0.55	1.0x10^-6	Hole with Keyway d1 Side	6.1 - 6.3	6.1 - 6.3	10	1 szt.
3.01 to 5.00	6 - 10	6 - 10	20	27.2	3.2	8000	1.1 to 3.0	1.5	+0.6/-0.6	2.4x10^-6	Hole with Keyway d1 Side	-	-	10	1 szt.
3.01 to 5.00	6 - 10	-	20	27.2	3.2	8000	1.1 to 3.0	1.5	+0.6/-0.6	2.4x10^-6	Hole with Keyway d1 Side	-	6.1 - 10	10	1 szt.
3.01 to 5.00	-	6 - 10	20	27.2	3.2	8000	1.1 to 3.0	1.5	+0.6/-0.6	2.4x10^-6	Hole with Keyway d1 Side	6.1 - 10	-	10	1 szt.
3.01 to 5.00	-	-	20	27.2	3.2	8000	1.1 to 3.0	1.5	+0.6/-0.6	2.4x10^-6	Hole with Keyway d1 Side	6.1 - 10	6.1 - 10	10	1 szt.
5.01 to 10.00	6 - 12	6 - 12	26	30.4	6	6500	1.1 to 3.0	2	+0.6/-0.6	8.0x10^-6	Hole with Keyway d1 Side	-	-	10	1 szt.
5.01 to 10.00	6 - 12	-	26	30.4	6	6500	1.1 to 3.0	2	+0.6/-0.6	8.0x10^-6	Hole with Keyway d1 Side	-	6.1 - 12	10	1 szt.
5.01 to 10.00	-	6 - 12	26	30.4	6	6500	1.1 to 3.0	2	+0.6/-0.6	8.0x10^-6	Hole with Keyway d1 Side	6.1 - 12	-	10	1 szt.
5.01 to 10.00	-	-	26	30.4	6	6500	1.1 to 3.0	2	+0.6/-0.6	8.0x10^-6	Hole with Keyway d1 Side	6.1 - 12	6.1 - 12	10	1 szt.
10.01 to 20.00	8 - 14	8 - 14	30	33	15	6200	1.1 to 3.0	2	+0.6/-0.6	2.0x10^-5	Hole with Keyway d1 Side	-	-	10	1 szt.
10.01 to 20.00	8 - 14	-	30	33	15	6200	1.1 to 3.0	2	+0.6/-0.6	2.0x10^-5	Hole with Keyway d1 Side	-	8.1 - 14	10	1 szt.
10.01 to 20.00	-	8 - 14	30	33	15	6200	1.1 to 3.0	2	+0.6/-0.6	2.0x10^-5	Hole with Keyway d1 Side	8.1 - 14	-	10	1 szt.
10.01 to 20.00	-	-	30	33	15	6200	1.1 to 3.0	2	+0.6/-0.6	2.0x10^-5	Hole with Keyway d1 Side	8.1 - 14	8.1 - 14	10	1 szt.
10.01 to 20.00	10 - 16	10 - 16	34	34	16	6000	1.1 to 3.0	2.5	+0.6/-0.6	2.5x10^-5	Hole with Keyway d1 Side	-	-	10	1 szt.
10.01 to 20.00	10 - 16	-	34	34	16	6000	1.1 to 3.0	2.5	+0.6/-0.6	2.5x10^-5	Hole with Keyway d1 Side	-	10.1 - 18	10	1 szt.
10.01 to 20.00	-	10 - 16	34	34	16	6000	1.1 to 3.0	2.5	+0.6/-0.6	2.5x10^-5	Hole with Keyway d1 Side	10.1 - 18	-	10	1 szt.
10.01 to 20.00	-	-	34	34	16	6000	1.1 to 3.0	2.5	+0.6/-0.6	2.5x10^-5	Hole with Keyway d1 Side	10.1 - 18	10.1 - 18	10	1 szt.
20.01 to 50.00	10 - 20	10 - 20	38	40	28	5800	1.1 to 3.0	2.5	+0.6/-0.6	8.0x10^-5	Hole with Keyway d1 Side	-	-	10	1 szt.
20.01 to 50.00	10 - 20	-	38	40	28	5800	1.1 to 3.0	2.5	+0.6/-0.6	8.0x10^-5	Hole with Keyway d1 Side	-	10.1 - 20	10	1 szt.
20.01 to 50.00	-	10 - 20	38	40	28	5800	1.1 to 3.0	2.5	+0.6/-0.6	8.0x10^-5	Hole with Keyway d1 Side	10.1 - 20	-	10	1 szt.
20.01 to 50.00	-	-	38	40	28	5800	1.1 to 3.0	2.5	+0.6/-0.6	8.0x10^-5	Hole with Keyway d1 Side	10.1 - 20	10.1 - 20	10	1 szt.
1.01 to 3.00	4 - 6	6	14.5	18.4	1.6	10000	0.41 to 1.0	0.8	+0.45/-0.45	5.0x10^-7	Hole with Keyway d2 Side	-	-	10	1 szt.
1.01 to 3.00	-	6	14.5	18.4	1.6	10000	0.41 to 1.0	0.8	+0.45/-0.45	5.0x10^-7	Hole with Keyway d2 Side	4.1 - 6	-	10	1 szt.
1.01 to 3.00	6 - 6.35	6 - 6.35	16.8	24.4	2.2	10000	0.41 to 1.0	1	+0.55/-0.55	1.0x10^-6	Hole with Keyway d2 Side	-	-	10	1 szt.
1.01 to 3.00	6 - 6.35	-	16.8	24.4	2.2	10000	0.41 to 1.0	1	+0.55/-0.55	1.0x10^-6	Hole with Keyway d2 Side	-	6.1 - 6.3	10	1 szt.
1.01 to 3.00	-	6 - 6.35	16.8	24.4	2.2	10000	0.41 to 1.0	1	+0.55/-0.55	1.0x10^-6	Hole with Keyway d2 Side	6.1 - 6.3	-	10	1 szt.
1.01 to 3.00	-	-	16.8	24.4	2.2	10000	0.41 to 1.0	1	+0.55/-0.55	1.0x10^-6	Hole with Keyway d2 Side	6.1 - 6.3	6.1 - 6.3	10	1 szt.
3.01 to 5.00	6 - 10	6 - 10	20	27.2	3.2	8000	1.1 to 3.0	1.5	+0.6/-0.6	2.4x10^-6	Hole with Keyway d2 Side	-	-	10	1 szt.

Cena jednostkowa (bez VAT)(Cena jednostkowa z podatkiem)	Standardowa data wysyłki

- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze

Dalej

Podstawowe informacje

Dane techniczne

Kontury i specyfikacja

General Information - Claw Couplings

Shaft coupling - compensation coupling - Oldham coupling - slit coupling - chain coupling - disc coupling - bellow coupling - product assortment

Shaft Coupling Selection Details

- Material: aluminum, aluminum alloy, steel, stainless steel, plastic

- Coupling buffer material: polyacetal, polyurethane, nylon, aluminum bronze, carbon fibre reinforced polymer (CFRP)

- Disc material: stainless steel, polyimide, carbon fibre (carbon)

- Fastening: hub clamping, half shell clamping, threaded pin clamping, clamping sleeve, keyway

- Design: slit coupling, disc coupling (servo coupling), Oldham coupling, dog coupling, jaw coupling, bellow coupling, metal bellow coupling, elastomer coupling

- ISO tolerances: H8

- Shaft diameter: 1 to 45 mm

- Outer diameter: 6 to 95 mm

- Length: 8.4 to 100 mm

- Offset: angle offset, radial offset, axial offset

Design Overview

Description/Basics

A shaft coupling, also called a compensating coupling, is generally used for the transmission of torque for mechanical engineering. Flexible shaft couplings (non-rigid) can compensate for lateral, axial and angular offsets (misalignment). Therefore, these are common connecting elements between motors and axles/shafts or even ball screws.

There are various types of designs, such as the jaw couplings, disc couplings (servo couplings), slit couplings, bellow couplings, Oldham couplings and many others, which are selected depending on the type of misalignment. You can determine which design is the right one for transmission in your application with the Coupling Selection Method available as a PDF.

When the shaft coupling is professionally installed, the transmission of rotational forces should be slip-free. To do this, the appropriate shaft coupling must be selected depending on the application. Here, it is important to observe the degree of misalignment, the maximum speed of rotation and the permissible torque of the compensation coupling and not to exceed these values during operation. If several misalignments occur at the same time, it is recommended to reduce the maximum value of the specified misalignment by approximately half.

The most commonly used elastomer coupling is the jaw coupling, which consists of a plastic buffer with damping properties. As a result, shocks and vibrations in a drive system can be damped, which protects adjacent components in the transmission of force. Our product range offers you alternative materials for the elastomers. These include among others aluminum bronze and carbon fibre-reinforced plastic.

The different shaft connections on the compensation couplings allow various connection variants for assembly. For this purpose, hub clamping, half shell clamping, slot clamping, threaded pin clamping, chip sleeve and keyways are available.
If a keyway is selected for a MISUMI shaft coupling, it is recommended obtaining the MISUMI machine key, as it is best to combine these.

A shaft coupling can be used for precise positioning. These are often combined together with slide screws or ball screws. A disc clutch (servo coupling) is suitable for this application, since it has a high torsional rigidity.

In addition to the standardized diameter of the shaft bore, MISUMI offers the option LDC and RDC, which allows the drill diameter to be adjusted to the shaft end in 0.1 mm increments.