Rotary axes / offset on one side, two-sided internal thread / machining selectable (Part Numbers - CAD Download)

Click on this image to zoom in.

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Rotary Shafts/One End Stepped/Both Ends Tapped:Related Image

Type			Tolerance		Material	Surface Treatment
	Standard	Wrench Flats	D	P	Material	Surface Treatment
	SFRMHA	SFRMHAS	h9 (Cold-drawn)	h7	EN 1.1191 Equiv.	Black Oxide
	PSFRMHA	PSFRMHAS			EN 1.1191 Equiv.	Electroless Nickel Plating
	SSFRMHA	SSFRMHAS			EN 1.4301 Equiv.	-
	SFRMGA	SFRMGAS		g6	EN 1.1191 Equiv.	Black Oxide
	PSFRMGA	PSFRMGAS			EN 1.1191 Equiv.	Electroless Nickel Plating
	SSFRMGA	SSFRMGAS			EN 1.4301 Equiv.	-
	SFRHA	SFRHAS	h7 (Ground)	h7	EN 1.1191 Equiv.	Black Oxide
	PSFRHA	PSFRHAS			EN 1.1191 Equiv.	Electroless Nickel Plating
	SSFRHA	SSFRHAS			EN 1.4301 Equiv.	-
	SFRA	SFRAS	g6 (Ground)	g6	EN 1.1191 Equiv.	Black Oxide
	PSFRA	PSFRAS			EN 1.1191 Equiv.	Electroless Nickel Plating
	SSFRA	SSFRAS			EN 1.4301 Equiv.	-

Specifications

	Part Number	-	L	-	F	-	P	-	M	-	N	-	SC
D part h9 / P part h7 h7 (Ground) with Wrench Flat	SFRMHA30 SFRMHAS25	- -	250 200	- -	F30 F40	- -	P16 P20	- -	M10 M10	- -	N10 N10	-	SC30

D tolerance h9 (Cold-drawn) / P tolerance h7 D tolerance h9 (Cold-drawn) / P tolerance g6

Part Number			0.1mm Increment		1mm Increment	M (Coarse) Selection										N (Coarse) Selection										1mm Increment	W	ℓ₂	(Y)max.
Type		D	L	F	P																					SC Wrench Flats Type only
Standard	Wrench Flats	D	L	F	P																					SC Wrench Flats Type only
D part h9, P part h7 SFRMHA PSFRMHA SSFRMHA (D6 is not available for SSFRMHA.) D part h9, P part g6 SFRMGA PSFRMGA SSFRMGA (D6 is not available for SSFRMGA.)	D part h9, P part h7 SFRMHAS PSFRMHAS SSFRMHAS (D6 is not available for SSFRMHAS.) D part h9, P part g6 SFRMGAS PSFRMGAS SSFRMGAS (D6 is not available for SSFRMGA.)	6	20.0~298.0	2≤F≤Px5	5	3										3										SC+ℓ₂≤L SC=0 or SC≥1 When SC≤Mx3-F or L-SC≤Nx3, W-M (N)≥2	5	8	300
		8	20.0~398.0		For M3 ~ M8 M+2≤PFor M10 ~ 16 M+3≤PFor M20 or M24 M+4≤P	3	4	5								3	4	5	6								7		400
		10	20.0~498.0				4	5	6								4	5	6								8		500
		12	30.0~598.0					5	6	8								5	6	8							10	10	600
		15	30.0~698.0					5	6	8	10							5	6	8	10						13		700
		20	40.0~798.0					5	6	8	10	12						5	6	8	10	12	16				17		800
		25	50.0~798.0					5	6	8	10	12	16					5	6	8	10	12	16				22
		30	60.0~798.0							8	10	12	16	20						8	10	12	16	20			27	15
		35	70.0~798.0							8	10	12	16	20	24					8	10	12	16	20	24		30	15

h7 (Ground)

Part Number			0.1mm Increment		1mm Increment	M (Coarse) Selection											N (Coarse) Selection											W	ℓ₂	(Y)max.
Type		D	L	F	P
Standard	Wrench Flats	D	L	F	P
SFRHA PSFRHA SSFRHA	SFRHAS PSFRHAS SSFRHAS	6	20.0~298.0	2≤F≤Px5	5	3											3											5	8	300
		8	20.0~398.0		For M3 ~ M8 M+2≤PFor M10 ~ 16 M+3≤PFor M20 or M24 M+4≤PFor M30 M+5≤P	3	4	5									3	4	5	6								7		400
		10	20.0~498.0				4	5	6									4	5	6								8		500
		12	30.0~598.0					5	6	8									5	6	8							10	10	600
		15	30.0~698.0					5	6	8	10								5	6	8	10						13		700
		17	40.0~798.0					5	6	8	10	12							5	6	8	10	12					14		800
		20	40.0~798.0					5	6	8	10	12							5	6	8	10	12	16				17
		25	50.0~798.0					5	6	8	10	12	16						5	6	8	10	12	16				22
		30	60.0~798.0							8	10	12	16	20							8	10	12	16	20			27	15
		35	70.0~798.0							8	10	12	16	20	24						8	10	12	16	20	24		30	15
		40	80.0~798.0									12	16	20	24	30							12	16	20	24	30	36	20
		50	100.0~798.0										16	20	24	30								16	20	24	30	41	20

g6 (Ground)

Part Number			0.1mm Increment		1mm Increment	M (Coarse) Selection											N (Coarse) Selection											1mm Increment	W	ℓ₂	(Y)max.
Type		D	L	F	P																							SC Wrench Flats Type only
Standard	Wrench Flats	D	L	F	P																							SC Wrench Flats Type only
SFRA PSFRA SSFRA (D13, 16, 18 and 22 are not available for SSFRA.)	SFRAS PSFRAS SSFRAS (D13, 16, 18 and 22 are not available for SSFRAS.)	6	20.0~298.0	2≤F≤Px5	5	3											3											SC+ℓ₂≤L SC=0 or SC≥1 When SC≤Mx3-F or L-SC≤Nx3, W-M (N)≥2	5	8	300
		8	20.0~398.0		For M3 ~ M8 M+2≤PFor M10 ~ 16 M+3≤PFor M20 or M24 M+4≤PFor M30 M+5≤P	3	4	5									3	4	5	6									7		400
		10	20.0~498.0				4	5	6									4	5	6									8		500
		12	30.0~598.0					5	6	8									5	6	8								10	10	600
		13	30.0~598.0					5	6	8	10								5	6	8	10							11		600
		15	30.0~698.0					5	6	8	10								5	6	8	10							13		700
		16	40.0~798.0					5	6	8	10	12							5	6	8	10	12						14		800
		17	40.0~798.0					5	6	8	10	12							5	6	8	10	12						14
		18	40.0~798.0					5	6	8	10	12							5	6	8	10	12	16					15
		20	40.0~798.0					5	6	8	10	12							5	6	8	10	12	16					17
		22	50.0~798.0					5	6	8	10	12	16						5	6	8	10	12	16					19
		25	50.0~798.0					5	6	8	10	12	16						5	6	8	10	12	16					22
		30	60.0~798.0							8	10	12	16	20							8	10	12	16	20				27	15
		35	70.0~798.0							8	10	12	16	20	24						8	10	12	16	20	24			30	15
		40	80.0~798.0									12	16	20	24	30							12	16	20	24	30		36	20
		50	100.0~798.0										16	20	24	30								16	20	24	30		41	20

When D-P≤2, chamfer C at the step is 0.2 or less. Overall length requires Nx3≤L. Mx2+Nx2≤(Y) is required for (Y).

Alterations

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
PSFRA6-[15-398/0.1]-F[2-25/0.1]-P5-M[2.6,3,4]-N[2.6,3,4]
PSFRA6-[15-398/0.1]-F[2-25/0.1]-P5-M[2.6,3,4]-ND[3,4]
PSFRA6-[15-398/0.1]-F[2-25/0.1]-P5-MD[3,4]-N[2.6,3,4]
PSFRA6-[15-398/0.1]-F[2-25/0.1]-P5-MD[3,4]-ND[3,4]
PSFRA8-[15-498/0.1]-F[2-35/0.1]-P[5-7/1]-M[2.6,3,4,5,6]-N[2.6,3,4,5,6]
PSFRA8-[15-498/0.1]-F[2-35/0.1]-P[5-7/1]-M[2.6,3,4,5,6]-ND[3,4,5,6]
PSFRA8-[15-498/0.1]-F[2-35/0.1]-P[5-7/1]-MD[3,4,5,6]-N[2.6,3,4,5,6]
PSFRA8-[15-498/0.1]-F[2-35/0.1]-P[5-7/1]-MD[3,4,5,6]-ND[3,4,5,6]
PSFRA10-[15-598/0.1]-F[2-50/0.1]-P[6-9/1]-M[3,4,5,6]-N[3,4,5,6]
PSFRA10-[15-598/0.1]-F[2-50/0.1]-P[6-9/1]-M[3,4,5,6]-ND[3,4,5,6]
PSFRA10-[15-598/0.1]-F[2-50/0.1]-P[6-9/1]-MD[3,4,5,6]-N[3,4,5,6]
PSFRA10-[15-598/0.1]-F[2-50/0.1]-P[6-9/1]-MD[3,4,5,6]-ND[3,4,5,6]
PSFRA12-[15-698/0.1]-F[2-55/0.1]-P[7-11/1]-M[4,5,6,8]-N[4,5,6,8]
PSFRA12-[15-698/0.1]-F[2-55/0.1]-P[7-11/1]-M[4,5,6,8]-ND[4,5,6,8]
PSFRA12-[15-698/0.1]-F[2-55/0.1]-P[7-11/1]-MD[4,5,6,8]-N[4,5,6,8]
PSFRA12-[15-698/0.1]-F[2-55/0.1]-P[7-11/1]-MD[4,5,6,8]-ND[4,5,6,8]
PSFRA13-[15-898/0.1]-F[2-55/0.1]-P[5-12/1]-M[3,4,5,6,8]-N[3,4,5,6,8]
PSFRA13-[15-898/0.1]-F[2-55/0.1]-P[5-12/1]-M[3,4,5,6,8]-ND[3,4,5,6,8]
PSFRA13-[15-898/0.1]-F[2-55/0.1]-P[5-12/1]-MD[3,4,5,6,8]-N[3,4,5,6,8]
PSFRA13-[15-898/0.1]-F[2-55/0.1]-P[5-12/1]-MD[3,4,5,6,8]-ND[3,4,5,6,8]
PSFRA15-[15-798/0.1]-F[2-70/0.1]-P[7-14/1]-M[4,5,6,8,10]-N[4,5,6,8,10]
PSFRA15-[15-798/0.1]-F[2-70/0.1]-P[7-14/1]-M[4,5,6,8,10]-ND[4,5,6,8,10]
PSFRA15-[15-798/0.1]-F[2-70/0.1]-P[7-14/1]-MD[4,5,6,8,10]-N[4,5,6,8,10]
PSFRA15-[15-798/0.1]-F[2-70/0.1]-P[7-14/1]-MD[4,5,6,8,10]-ND[4,5,6,8,10]
PSFRA16-[15-998/0.1]-F[2-70/0.1]-P[6-15/1]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12]
PSFRA16-[15-998/0.1]-F[2-70/0.1]-P[6-15/1]-M[4,5,6,8,10,12]-ND[4,5,6,8,10,12]
PSFRA16-[15-998/0.1]-F[2-70/0.1]-P[6-15/1]-MD[4,5,6,8,10,12]-N[4,5,6,8,10,12]
PSFRA16-[15-998/0.1]-F[2-70/0.1]-P[6-15/1]-MD[4,5,6,8,10,12]-ND[4,5,6,8,10,12]
PSFRA17-[30-898/0.1]-F[2-80/0.1]-P[7-16/1]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12]
PSFRA17-[30-898/0.1]-F[2-80/0.1]-P[7-16/1]-M[4,5,6,8,10,12]-ND[4,5,6,8,10,12]
PSFRA17-[30-898/0.1]-F[2-80/0.1]-P[7-16/1]-MD[4,5,6,8,10,12]-N[4,5,6,8,10,12]
PSFRA17-[30-898/0.1]-F[2-80/0.1]-P[7-16/1]-MD[4,5,6,8,10,12]-ND[4,5,6,8,10,12]
PSFRA18-[24-998/0.1]-F[2-80/0.1]-P[6-17/1]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12]
PSFRA18-[24-998/0.1]-F[2-80/0.1]-P[6-17/1]-M[4,5,6,8,10,12]-ND[4,5,6,8,10,12]
PSFRA18-[24-998/0.1]-F[2-80/0.1]-P[6-17/1]-MD[4,5,6,8,10,12]-N[4,5,6,8,10,12]
PSFRA18-[24-998/0.1]-F[2-80/0.1]-P[6-17/1]-MD[4,5,6,8,10,12]-ND[4,5,6,8,10,12]
PSFRA20-[30-998/0.1]-F[2-95/0.1]-P[7-19/1]-M[4,5,6,8,10,12,16]-N[4,5,6,8,10,12,16]
PSFRA20-[30-998/0.1]-F[2-95/0.1]-P[7-19/1]-M[4,5,6,8,10,12,16]-ND[4,5,6,8,10,12,16]
PSFRA20-[30-998/0.1]-F[2-95/0.1]-P[7-19/1]-MD[4,5,6,8,10,12,16]-N[4,5,6,8,10,12,16]
PSFRA20-[30-998/0.1]-F[2-95/0.1]-P[7-19/1]-MD[4,5,6,8,10,12,16]-ND[4,5,6,8,10,12,16]
PSFRA22-[24-998/0.1]-F[2-95/0.1]-P[6-21/1]-M[4,5,6,8,10,12,16]-N[4,5,6,8,10,12,16]
PSFRA22-[24-998/0.1]-F[2-95/0.1]-P[6-21/1]-M[4,5,6,8,10,12,16]-ND[4,5,6,8,10,12,16]
PSFRA22-[24-998/0.1]-F[2-95/0.1]-P[6-21/1]-MD[4,5,6,8,10,12,16]-N[4,5,6,8,10,12,16]
PSFRA22-[24-998/0.1]-F[2-95/0.1]-P[6-21/1]-MD[4,5,6,8,10,12,16]-ND[4,5,6,8,10,12,16]
PSFRA25-[50-998/0.1]-F[2-120/0.1]-P[7-24/1]-M[4,5,6,8,10,12,16]-N[4,5,6,8,10,12,16]
PSFRA25-[50-998/0.1]-F[2-120/0.1]-P[7-24/1]-M[4,5,6,8,10,12,16]-ND[4,5,6,8,10,12,16]
PSFRA25-[50-998/0.1]-F[2-120/0.1]-P[7-24/1]-MD[4,5,6,8,10,12,16]-N[4,5,6,8,10,12,16]
PSFRA25-[50-998/0.1]-F[2-120/0.1]-P[7-24/1]-MD[4,5,6,8,10,12,16]-ND[4,5,6,8,10,12,16]
PSFRA30-[60-998/0.1]-F[2-145/0.1]-P[10-29/1]-M[6,8,10,12,16,20]-N[6,8,10,12,16,20]
PSFRA30-[60-998/0.1]-F[2-145/0.1]-P[10-29/1]-M[6,8,10,12,16,20]-ND[6,8,10,12,16,20]
PSFRA30-[60-998/0.1]-F[2-145/0.1]-P[10-29/1]-MD[6,8,10,12,16,20]-N[6,8,10,12,16,20]
PSFRA30-[60-998/0.1]-F[2-145/0.1]-P[10-29/1]-MD[6,8,10,12,16,20]-ND[6,8,10,12,16,20]
PSFRA35-[70-998/0.1]-F[2-170/0.1]-P[10-34/1]-M[6,8,10,12,16,20,24]-N[6,8,10,12,16,20,24]
PSFRA35-[70-998/0.1]-F[2-170/0.1]-P[10-34/1]-M[6,8,10,12,16,20,24]-ND[6,8,10,12,16,20]
PSFRA35-[70-998/0.1]-F[2-170/0.1]-P[10-34/1]-MD[6,8,10,12,16,20]-N[6,8,10,12,16,20,24]
PSFRA35-[70-998/0.1]-F[2-170/0.1]-P[10-34/1]-MD[6,8,10,12,16,20]-ND[6,8,10,12,16,20]
PSFRA40-[80-998/0.1]-F[2-195/0.1]-P[15-39/1]-M[10,12,16,20,24,30]-N[10,12,16,20,24,30]
PSFRA40-[80-998/0.1]-F[2-195/0.1]-P[15-39/1]-M[10,12,16,20,24,30]-ND[10,12,16,20]
PSFRA40-[80-998/0.1]-F[2-195/0.1]-P[15-39/1]-MD[10,12,16,20]-N[10,12,16,20,24,30]
PSFRA40-[80-998/0.1]-F[2-195/0.1]-P[15-39/1]-MD[10,12,16,20]-ND[10,12,16,20]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Material	Surface Treatment	D Tolerance	Shaft Dia. D (mm)	Length L (mm)	F (mm)	M (mm)	MD	N (mm)	ND	P (mm)	Wrench Flats Machining [SC] (mm)
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	6	15 ～ 398	2 ～ 25	2.6 ～ 4	-	2.6 ～ 4	-	5	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	6	15 ～ 398	2 ～ 25	2.6 ～ 4	-	-	3 ～ 4	5	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	6	15 ～ 398	2 ～ 25	-	3 ～ 4	2.6 ～ 4	-	5	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	6	15 ～ 398	2 ～ 25	-	3 ～ 4	-	3 ～ 4	5	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	8	15 ～ 498	2 ～ 35	2.6 ～ 6	-	2.6 ～ 6	-	5 ～ 7	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	8	15 ～ 498	2 ～ 35	2.6 ～ 6	-	-	3 ～ 6	5 ～ 7	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	8	15 ～ 498	2 ～ 35	-	3 ～ 6	2.6 ～ 6	-	5 ～ 7	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	8	15 ～ 498	2 ～ 35	-	3 ～ 6	-	3 ～ 6	5 ～ 7	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	10	15 ～ 598	2 ～ 50	3 ～ 6	-	3 ～ 6	-	6 ～ 9	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	10	15 ～ 598	2 ～ 50	3 ～ 6	-	-	3 ～ 6	6 ～ 9	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	10	15 ～ 598	2 ～ 50	-	3 ～ 6	3 ～ 6	-	6 ～ 9	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	10	15 ～ 598	2 ～ 50	-	3 ～ 6	-	3 ～ 6	6 ～ 9	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	12	15 ～ 698	2 ～ 55	4 ～ 8	-	4 ～ 8	-	7 ～ 11	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	12	15 ～ 698	2 ～ 55	4 ～ 8	-	-	4 ～ 8	7 ～ 11	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	12	15 ～ 698	2 ～ 55	-	4 ～ 8	4 ～ 8	-	7 ～ 11	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	12	15 ～ 698	2 ～ 55	-	4 ～ 8	-	4 ～ 8	7 ～ 11	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	13	15 ～ 898	2 ～ 55	3 ～ 8	-	3 ～ 8	-	5 ～ 12	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	13	15 ～ 898	2 ～ 55	3 ～ 8	-	-	3 ～ 8	5 ～ 12	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	13	15 ～ 898	2 ～ 55	-	3 ～ 8	3 ～ 8	-	5 ～ 12	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	13	15 ～ 898	2 ～ 55	-	3 ～ 8	-	3 ～ 8	5 ～ 12	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	15	15 ～ 798	2 ～ 70	4 ～ 10	-	4 ～ 10	-	7 ～ 14	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	15	15 ～ 798	2 ～ 70	4 ～ 10	-	-	4 ～ 10	7 ～ 14	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	15	15 ～ 798	2 ～ 70	-	4 ～ 10	4 ～ 10	-	7 ～ 14	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	15	15 ～ 798	2 ～ 70	-	4 ～ 10	-	4 ～ 10	7 ～ 14	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	16	15 ～ 998	2 ～ 70	4 ～ 12	-	4 ～ 12	-	6 ～ 15	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	16	15 ～ 998	2 ～ 70	4 ～ 12	-	-	4 ～ 12	6 ～ 15	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	16	15 ～ 998	2 ～ 70	-	4 ～ 12	4 ～ 12	-	6 ～ 15	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	16	15 ～ 998	2 ～ 70	-	4 ～ 12	-	4 ～ 12	6 ～ 15	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	17	30 ～ 898	2 ～ 80	4 ～ 12	-	4 ～ 12	-	7 ～ 16	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	17	30 ～ 898	2 ～ 80	4 ～ 12	-	-	4 ～ 12	7 ～ 16	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	17	30 ～ 898	2 ～ 80	-	4 ～ 12	4 ～ 12	-	7 ～ 16	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	17	30 ～ 898	2 ～ 80	-	4 ～ 12	-	4 ～ 12	7 ～ 16	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	18	24 ～ 998	2 ～ 80	4 ～ 12	-	4 ～ 12	-	6 ～ 17	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	18	24 ～ 998	2 ～ 80	4 ～ 12	-	-	4 ～ 12	6 ～ 17	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	18	24 ～ 998	2 ～ 80	-	4 ～ 12	4 ～ 12	-	6 ～ 17	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	18	24 ～ 998	2 ～ 80	-	4 ～ 12	-	4 ～ 12	6 ～ 17	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	20	30 ～ 998	2 ～ 95	4 ～ 16	-	4 ～ 16	-	7 ～ 19	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	20	30 ～ 998	2 ～ 95	4 ～ 16	-	-	4 ～ 16	7 ～ 19	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	20	30 ～ 998	2 ～ 95	-	4 ～ 16	4 ～ 16	-	7 ～ 19	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	20	30 ～ 998	2 ～ 95	-	4 ～ 16	-	4 ～ 16	7 ～ 19	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	22	24 ～ 998	2 ～ 95	4 ～ 16	-	4 ～ 16	-	6 ～ 21	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	22	24 ～ 998	2 ～ 95	4 ～ 16	-	-	4 ～ 16	6 ～ 21	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	22	24 ～ 998	2 ～ 95	-	4 ～ 16	4 ～ 16	-	6 ～ 21	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	22	24 ～ 998	2 ～ 95	-	4 ～ 16	-	4 ～ 16	6 ～ 21	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	25	50 ～ 998	2 ～ 120	4 ～ 16	-	4 ～ 16	-	7 ～ 24	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	25	50 ～ 998	2 ～ 120	4 ～ 16	-	-	4 ～ 16	7 ～ 24	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	25	50 ～ 998	2 ～ 120	-	4 ～ 16	4 ～ 16	-	7 ～ 24	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	25	50 ～ 998	2 ～ 120	-	4 ～ 16	-	4 ～ 16	7 ～ 24	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	30	60 ～ 998	2 ～ 145	6 ～ 20	-	6 ～ 20	-	10 ～ 29	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	30	60 ～ 998	2 ～ 145	6 ～ 20	-	-	6 ～ 20	10 ～ 29	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	30	60 ～ 998	2 ～ 145	-	6 ～ 20	6 ～ 20	-	10 ～ 29	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	30	60 ～ 998	2 ～ 145	-	6 ～ 20	-	6 ～ 20	10 ～ 29	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	35	70 ～ 998	2 ～ 170	6 ～ 24	-	6 ～ 24	-	10 ～ 34	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	35	70 ～ 998	2 ～ 170	6 ～ 24	-	-	6 ～ 20	10 ～ 34	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	35	70 ～ 998	2 ～ 170	-	6 ～ 20	6 ～ 24	-	10 ～ 34	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	35	70 ～ 998	2 ～ 170	-	6 ～ 20	-	6 ～ 20	10 ～ 34	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	40	80 ～ 998	2 ～ 195	10 ～ 30	-	10 ～ 30	-	15 ～ 39	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	40	80 ～ 998	2 ～ 195	10 ～ 30	-	-	10 ～ 20	15 ～ 39	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	40	80 ～ 998	2 ～ 195	-	10 ～ 20	10 ～ 30	-	15 ～ 39	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	40	80 ～ 998	2 ～ 195	-	10 ～ 20	-	10 ～ 20	15 ～ 39	-

1
2
3
4
5
Next >>

Example of Use

Products homepage

Basic information

Basic Shape	One End Stepped	End Shape (Left)	Tapped	End Shape (Right)	Tapped
Hardness	No Hardened	Keyway	Keyway Option (Alteration)

Configure

988Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Material
- Steel
  - EN 1.1191 Equiv.
- Stainless Steel
  - EN 1.4301 Equiv.
Clear
Surface Treatment
- NA
- Surface Treatment Provided
  - Black Oxide
  - Electroless Nickel Plating
Clear
D Tolerance
- h9 (Cold-drawn)
- h7 (Ground)
- g6 (Ground)
Clear
Shaft Dia. D(mm)
6

8

10

12

13

15

16

17

18

20

22

25

30

35

40

50
Clear
Length L(mm)
[15-998/0.1mm Unit(s)]
Clear
F(mm)
[2-245/0.1mm Unit(s)]
Clear
M(mm)
2.6

3

4

5

6

8

10

12

16

20

24

30
Clear
MD
3

4

5

6

8

10

12

16

20
Clear
N(mm)
2.6

3

4

5

6

8

10

12

16

20

24

30
Clear
ND
3

4

5

6

8

10

12

16

20
Clear
P(mm)
5
[5-49/1mm Unit(s)]
Clear
Wrench Flats Machining [SC](mm)
[0-988/1mm Unit(s)]
Clear
Type
- PSFRA
- PSFRAS
- PSFRHA
- PSFRHAS
- PSFRMGA
- PSFRMGAS
- PSFRMHA
- PSFRMHAS
- SFRA
- SFRAS
- SFRHA
- SFRHAS
- SFRMGAS
- SFRMHA
- SFRMHAS
- SSFRA
- SSFRAS
- SSFRHA
- SSFRHAS
- SSFRMGA
- SSFRMGAS
- SSFRMHAS
Clear
Filter by CAD data type
- 2D
- 3D
Clear